Chapter 89. zone
This chapter describes the commands under the zone
command.
89.1. zone abandon
Abandon a zone
Usage:
openstack zone abandon [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.2. zone axfr
AXFR a zone
Usage:
openstack zone axfr [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.3. zone blacklist create
Create new blacklist
Usage:
openstack zone blacklist create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --pattern PATTERN [--description DESCRIPTION] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--pattern PATTERN | Blacklist pattern |
--description DESCRIPTION | Description |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.4. zone blacklist delete
Delete blacklist
Usage:
openstack zone blacklist delete [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Blacklist id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.5. zone blacklist list
List blacklists
Usage:
openstack zone blacklist list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.6. zone blacklist set
Set blacklist properties
Usage:
openstack zone blacklist set [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--pattern PATTERN] [--description DESCRIPTION | --no-description] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Blacklist id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--pattern PATTERN | Blacklist pattern |
--description DESCRIPTION | Description |
--no-description—all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.7. zone blacklist show
Show blacklist details
Usage:
openstack zone blacklist show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Blacklist id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.8. zone create
Create new zone
Usage:
openstack zone create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--email EMAIL] [--type TYPE] [--ttl TTL] [--description DESCRIPTION] [--masters MASTERS [MASTERS ...]] [--attributes ATTRIBUTES [ATTRIBUTES ...]] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] name
Value | Summary |
---|---|
name | Zone name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--email EMAIL | Zone email |
--type TYPE | Zone type |
--ttl TTL | Time to live (seconds) |
--description DESCRIPTION | Description |
--masters MASTERS [MASTERS …] | Zone masters |
--attributes ATTRIBUTES [ATTRIBUTES …] | Zone attributes |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.9. zone delete
Delete zone
Usage:
openstack zone delete [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.10. zone export create
Export a Zone
Usage:
openstack zone export create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_id
Value | Summary |
---|---|
zone_id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.11. zone export delete
Delete a Zone Export
Usage:
openstack zone export delete [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_export_id
Value | Summary |
---|---|
zone_export_id | Zone export id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.12. zone export list
List Zone Exports
Usage:
openstack zone export list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.13. zone export show
Show a Zone Export
Usage:
openstack zone export show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_export_id
Value | Summary |
---|---|
zone_export_id | Zone export id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.14. zone export showfile
Show the zone file for the Zone Export
Usage:
openstack zone export showfile [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_export_id
Value | Summary |
---|---|
zone_export_id | Zone export id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.15. zone import create
Import a Zone from a file on the filesystem
Usage:
openstack zone import create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_file_path
Value | Summary |
---|---|
zone_file_path | Path to a zone file |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.16. zone import delete
Delete a Zone Import
Usage:
openstack zone import delete [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_import_id
Value | Summary |
---|---|
zone_import_id | Zone import id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.17. zone import list
List Zone Imports
Usage:
openstack zone import list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.18. zone import show
Show a Zone Import
Usage:
openstack zone import show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_import_id
Value | Summary |
---|---|
zone_import_id | Zone import id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.19. zone list
List zones
Usage:
openstack zone list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--name NAME] [--email EMAIL] [--type TYPE] [--ttl TTL] [--description DESCRIPTION] [--status STATUS] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name NAME | Zone name |
--email EMAIL | Zone email |
--type TYPE | Zone type |
--ttl TTL | Time to live (seconds) |
--description DESCRIPTION | Description |
--status STATUS | Zone status |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.20. zone set
Set zone properties
Usage:
openstack zone set [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--email EMAIL] [--ttl TTL] [--description DESCRIPTION | --no-description] [--masters MASTERS [MASTERS ...]] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--email EMAIL | Zone email |
--ttl TTL | Time to live (seconds) |
--description DESCRIPTION | Description |
--no-description—masters MASTERS [MASTERS …] | Zone masters |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.21. zone show
Show zone details
Usage:
openstack zone show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.22. zone transfer accept list
List Zone Transfer Accepts
Usage:
openstack zone transfer accept list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.23. zone transfer accept request
Accept a Zone Transfer Request
Usage:
openstack zone transfer accept request [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] --transfer-id TRANSFER_ID --key KEY [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--transfer-id TRANSFER_ID | Transfer id |
--key KEY | Transfer key |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.24. zone transfer accept show
Show Zone Transfer Accept
Usage:
openstack zone transfer accept show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone tranfer accept id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.25. zone transfer request create
Create new zone transfer request
Usage:
openstack zone transfer request create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--target-project-id TARGET_PROJECT_ID] [--description DESCRIPTION] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] zone_id
Value | Summary |
---|---|
zone_id | Zone id to transfer. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--target-project-id TARGET_PROJECT_ID | Target project id to transfer to. |
--description DESCRIPTION | Description |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.26. zone transfer request delete
Delete a Zone Transfer Request
Usage:
openstack zone transfer request delete [-h] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone transfer request id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
89.27. zone transfer request list
List Zone Transfer Requests
Usage:
openstack zone transfer request list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.28. zone transfer request set
Set a Zone Transfer Request
Usage:
openstack zone transfer request set [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--description DESCRIPTION | --no-description] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone transfer request id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--description DESCRIPTION | Description |
--no-description—all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
89.29. zone transfer request show
Show Zone Transfer Request Details
Usage:
openstack zone transfer request show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--all-projects] [--edit-managed] [--sudo-project-id SUDO_PROJECT_ID] id
Value | Summary |
---|---|
id | Zone tranfer request id |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--all-projects | Show results from all projects. default: false |
--edit-managed | Edit resources marked as managed. default: false |
--sudo-project-id SUDO_PROJECT_ID | Project id to impersonate for this command. default: None |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |