SupportConsoleDevelopersStart a trialContact

Chapter 4. action

This chapter describes the commands under the action command.

4.1. action definition create

Create new action.

Usage:

openstack action definition create [-h]
                                          [-f {csv,json,table,value,yaml}]
                                          [-c COLUMN]
                                          [--quote {all,minimal,none,nonnumeric}]
                                          [--noindent] [--max-width <integer>]
                                          [--fit-width] [--print-empty]
                                          [--sort-column SORT_COLUMN]
                                          [--sort-ascending | --sort-descending]
                                          [--marker [MARKER]]
                                          [--limit [LIMIT]]
                                          [--sort_keys [SORT_KEYS]]
                                          [--sort_dirs [SORT_DIRS]]
                                          [--filter FILTERS] [--public]
                                          [--namespace [NAMESPACE]]
                                          definition

Table 4.1. Positional arguments
ValueSummary

definition

Action definition file

Table 4.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--public

With this flag action will be marked as "public".

--namespace [NAMESPACE]

Namespace to create the action within.

Table 4.3. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 4.4. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 4.5. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.6. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.2. action definition definition show

Show action definition.

Usage:

openstack action definition definition show [-h]
                                                   [--namespace [NAMESPACE]]
                                                   name

Table 4.7. Positional arguments
ValueSummary

name

Action name

Table 4.8. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace of the action.

4.3. action definition delete

Delete action.

Usage:

openstack action definition delete [-h] [--namespace [NAMESPACE]]
                                          action [action ...]

Table 4.9. Positional arguments
ValueSummary

action

Name or id of action(s).

Table 4.10. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace of the action(s).

4.4. action definition list

List all actions.

Usage:

openstack action definition list [-h] [-f {csv,json,table,value,yaml}]
                                        [-c COLUMN]
                                        [--quote {all,minimal,none,nonnumeric}]
                                        [--noindent] [--max-width <integer>]
                                        [--fit-width] [--print-empty]
                                        [--sort-column SORT_COLUMN]
                                        [--sort-ascending | --sort-descending]
                                        [--marker [MARKER]] [--limit [LIMIT]]
                                        [--sort_keys [SORT_KEYS]]
                                        [--sort_dirs [SORT_DIRS]]
                                        [--filter FILTERS]
                                        [--namespace [NAMESPACE]]

Table 4.11. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--namespace [NAMESPACE]

Namespace of the actions.

Table 4.12. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 4.13. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 4.14. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.15. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.5. action definition show

Show specific action.

Usage:

openstack action definition show [-h]
                                        [-f {json,shell,table,value,yaml}]
                                        [-c COLUMN] [--noindent]
                                        [--prefix PREFIX]
                                        [--max-width <integer>] [--fit-width]
                                        [--print-empty]
                                        [--namespace [NAMESPACE]]
                                        action

Table 4.16. Positional arguments
ValueSummary

action

Action (name or id)

Table 4.17. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--namespace [NAMESPACE]

Namespace to create the action within.

Table 4.18. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 4.19. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.20. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 4.21. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.6. action definition update

Update action.

Usage:

openstack action definition update [-h]
                                          [-f {csv,json,table,value,yaml}]
                                          [-c COLUMN]
                                          [--quote {all,minimal,none,nonnumeric}]
                                          [--noindent] [--max-width <integer>]
                                          [--fit-width] [--print-empty]
                                          [--sort-column SORT_COLUMN]
                                          [--sort-ascending | --sort-descending]
                                          [--marker [MARKER]]
                                          [--limit [LIMIT]]
                                          [--sort_keys [SORT_KEYS]]
                                          [--sort_dirs [SORT_DIRS]]
                                          [--filter FILTERS] [--id ID]
                                          [--public] [--namespace [NAMESPACE]]
                                          definition

Table 4.22. Positional arguments
ValueSummary

definition

Action definition file

Table 4.23. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--id ID

Action id.

--public

With this flag action will be marked as "public".

--namespace [NAMESPACE]

Namespace of the action.

Table 4.24. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 4.25. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 4.26. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.27. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.7. action execution delete

Delete action execution.

Usage:

openstack action execution delete [-h]
                                         action_execution
                                         [action_execution ...]

Table 4.28. Positional arguments
ValueSummary

action_execution

Id of action execution identifier(s).

Table 4.29. Command arguments
ValueSummary

-h, --help

Show this help message and exit

4.8. action execution input show

Show Action execution input data.

Usage:

openstack action execution input show [-h] id

Table 4.30. Positional arguments
ValueSummary

id

Action execution id.

Table 4.31. Command arguments
ValueSummary

-h, --help

Show this help message and exit

4.9. action execution list

List all Action executions.

Usage:

openstack action execution list [-h] [-f {csv,json,table,value,yaml}]
                                       [-c COLUMN]
                                       [--quote {all,minimal,none,nonnumeric}]
                                       [--noindent] [--max-width <integer>]
                                       [--fit-width] [--print-empty]
                                       [--sort-column SORT_COLUMN]
                                       [--sort-ascending | --sort-descending]
                                       [--marker [MARKER]] [--limit [LIMIT]]
                                       [--sort_keys [SORT_KEYS]]
                                       [--sort_dirs [SORT_DIRS]]
                                       [--filter FILTERS] [--oldest]
                                       [task_execution_id]

Table 4.32. Positional arguments
ValueSummary

task_execution_id

Task execution id.

Table 4.33. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--marker [MARKER]

The last execution uuid of the previous page, displays list of executions after "marker".

--limit [LIMIT]

Maximum number of entries to return in a single result.

--sort_keys [SORT_KEYS]

Comma-separated list of sort keys to sort results by. Default: created_at. Example: mistral execution-list --sort_keys=id,description

--sort_dirs [SORT_DIRS]

Comma-separated list of sort directions. default: asc. Example: mistral execution-list --sort_keys=id,description --sort_dirs=asc,desc

--filter FILTERS

Filters. can be repeated.

--oldest

Display the executions starting from the oldest entries instead of the newest

Table 4.34. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 4.35. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 4.36. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.37. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.10. action execution output show

Show Action execution output data.

Usage:

openstack action execution output show [-h] id

Table 4.38. Positional arguments
ValueSummary

id

Action execution id.

Table 4.39. Command arguments
ValueSummary

-h, --help

Show this help message and exit

4.11. action execution run

Create new Action execution or just run specific action.

Usage:

openstack action execution run [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty] [-s] [--run-sync]
                                      [-t TARGET] [--namespace [NAMESPACE]]
                                      name [input]

Table 4.40. Positional arguments
ValueSummary

name

Action name to execute.

input

Action input.

Table 4.41. Command arguments
ValueSummary

-h, --help

Show this help message and exit

-s, --save-result

Save the result into db.

--run-sync

Run the action synchronously.

-t TARGET, --target TARGET

Action will be executed on <target> executor.

--namespace [NAMESPACE]

Namespace of the action(s).

Table 4.42. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 4.43. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.44. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 4.45. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.12. action execution show

Show specific Action execution.

Usage:

openstack action execution show [-h] [-f {json,shell,table,value,yaml}]
                                       [-c COLUMN] [--noindent]
                                       [--prefix PREFIX]
                                       [--max-width <integer>] [--fit-width]
                                       [--print-empty]
                                       action_execution

Table 4.46. Positional arguments
ValueSummary

action_execution

Action execution id.

Table 4.47. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 4.48. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 4.49. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.50. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 4.51. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

4.13. action execution update

Update specific Action execution.

Usage:

openstack action execution update [-h]
                                         [-f {json,shell,table,value,yaml}]
                                         [-c COLUMN] [--noindent]
                                         [--prefix PREFIX]
                                         [--max-width <integer>] [--fit-width]
                                         [--print-empty]
                                         [--state {PAUSED,RUNNING,SUCCESS,ERROR,CANCELLED}]
                                         [--output OUTPUT]
                                         id

Table 4.52. Positional arguments
ValueSummary

id

Action execution id.

Table 4.53. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--state {PAUSED,RUNNING,SUCCESS,ERROR,CANCELLED}

Action execution state

--output OUTPUT

Action execution output

Table 4.54. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 4.55. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.56. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 4.57. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.