Buscar

Este contenido no está disponible en el idioma seleccionado.

Chapter 16. Disk Quotas

download PDF
Disk space can be restricted by implementing disk quotas which alert a system administrator before a user consumes too much disk space or a partition becomes full.
Disk quotas can be configured for individual users as well as user groups. This makes it possible to manage the space allocated for user-specific files (such as email) separately from the space allocated to the projects a user works on (assuming the projects are given their own groups).
In addition, quotas can be set not just to control the number of disk blocks consumed but to control the number of inodes (data structures that contain information about files in UNIX file systems). Because inodes are used to contain file-related information, this allows control over the number of files that can be created.
The quota RPM must be installed to implement disk quotas.

16.1. Configuring Disk Quotas

To implement disk quotas, use the following steps:
  1. Enable quotas per file system by modifying the /etc/fstab file.
  2. Remount the file system(s).
  3. Create the quota database files and generate the disk usage table.
  4. Assign quota policies.
Each of these steps is discussed in detail in the following sections.

16.1.1. Enabling Quotas

As root, using a text editor, edit the /etc/fstab file.

Example 16.1. Edit /etc/fstab

For example, to use the text editor vim type the following:
# vim /etc/fstab
Add the usrquota and/or grpquota options to the file systems that require quotas:

Example 16.2. Add quotas

/dev/VolGroup00/LogVol00 /         ext3    defaults        1 1 
LABEL=/boot              /boot     ext3    defaults        1 2 
none                     /dev/pts  devpts  gid=5,mode=620  0 0 
none                     /dev/shm  tmpfs   defaults        0 0 
none                     /proc     proc    defaults        0 0 
none                     /sys      sysfs   defaults        0 0 
/dev/VolGroup00/LogVol02 /home     ext3    defaults,usrquota,grpquota  1 2 
/dev/VolGroup00/LogVol01 swap      swap    defaults        0 0 . . .
In this example, the /home file system has both user and group quotas enabled.

Note

The following examples assume that a separate /home partition was created during the installation of Red Hat Enterprise Linux. The root (/) partition can be used for setting quota policies in the /etc/fstab file.

16.1.2. Remounting the File Systems

After adding the usrquota and/or grpquota options, remount each file system whose fstab entry has been modified. If the file system is not in use the following commands:
umount /mount-point
For example, umount /work.
mount /file-system /mount-point
For example, mount /dev/vdb1 /work.
If the file system is currently in use, the easiest method for remounting the file system is to reboot the system.

16.1.3. Creating the Quota Database Files

After each quota-enabled file system is remounted run the quotacheck command.
The quotacheck command examines quota-enabled file systems and builds a table of the current disk usage per file system. The table is then used to update the operating system's copy of disk usage. In addition, the file system's disk quota files are updated.
To create the quota files (aquota.user and aquota.group) on the file system, use the -c option of the quotacheck command.

Example 16.3. Create quota files

For example, if user and group quotas are enabled for the /home file system, create the files in the /home directory:
# quotacheck -cug /home
The -c option specifies that the quota files should be created for each file system with quotas enabled, the -u option specifies to check for user quotas, and the -g option specifies to check for group quotas.
If neither the -u or -g options are specified, only the user quota file is created. If only -g is specified, only the group quota file is created.
After the files are created, run the following command to generate the table of current disk usage per file system with quotas enabled:
# quotacheck -avug
The options used are as follows:
a
Check all quota-enabled, locally-mounted file systems
v
Display verbose status information as the quota check proceeds
u
Check user disk quota information
g
Check group disk quota information
After quotacheck has finished running, the quota files corresponding to the enabled quotas (user and/or group) are populated with data for each quota-enabled locally-mounted file system such as /home.

16.1.4. Assigning Quotas per User

The last step is assigning the disk quotas with the edquota command.
To configure the quota for a user, as root in a shell prompt, execute the command:
# edquota username
Perform this step for each user who needs a quota. For example, if a quota is enabled in /etc/fstab for the /home partition (/dev/VolGroup00/LogVol02 in the example below) and the command edquota testuser is executed, the following is shown in the editor configured as the default for the system:
Disk quotas for user testuser (uid 501):   
Filesystem                blocks     soft     hard    inodes   soft   hard   
/dev/VolGroup00/LogVol02  440436        0        0     37418      0      0

Note

The text editor defined by the EDITOR environment variable is used by edquota. To change the editor, set the EDITOR environment variable in your ~/.bash_profile file to the full path of the editor of your choice.
The first column is the name of the file system that has a quota enabled for it. The second column shows how many blocks the user is currently using. The next two columns are used to set soft and hard block limits for the user on the file system. The inodes column shows how many inodes the user is currently using. The last two columns are used to set the soft and hard inode limits for the user on the file system.
The hard block limit is the absolute maximum amount of disk space that a user or group can use. Once this limit is reached, no further disk space can be used.
The soft block limit defines the maximum amount of disk space that can be used. However, unlike the hard limit, the soft limit can be exceeded for a certain amount of time. That time is known as the grace period. The grace period can be expressed in seconds, minutes, hours, days, weeks, or months.
If any of the values are set to 0, that limit is not set. In the text editor, change the desired limits.

Example 16.4. Change desired limits

For example:
Disk quotas for user testuser (uid 501):   
Filesystem                blocks     soft     hard   inodes   soft   hard   
/dev/VolGroup00/LogVol02  440436   500000   550000    37418      0      0
To verify that the quota for the user has been set, use the command:
# quota username
Disk quotas for user username (uid 501): 
   Filesystem  blocks   quota   limit   grace   files   quota   limit   grace
     /dev/sdb    1000*   1000    1000               0       0       0

16.1.5. Assigning Quotas per Group

Quotas can also be assigned on a per-group basis. For example, to set a group quota for the devel group (the group must exist prior to setting the group quota), use the command:
# edquota -g devel
This command displays the existing quota for the group in the text editor:
Disk quotas for group devel (gid 505):   
Filesystem                blocks    soft     hard    inodes    soft    hard   
/dev/VolGroup00/LogVol02  440400       0        0     37418       0       0
Modify the limits, then save the file.
To verify that the group quota has been set, use the command:
# quota -g devel

16.1.6. Setting the Grace Period for Soft Limits

If a given quota has soft limits, you can edit the grace period (i.e. the amount of time a soft limit can be exceeded) with the following command:
# edquota -t
This command works on quotas for inodes or blocks, for either users or groups.

Important

While other edquota commands operate on quotas for a particular user or group, the -t option operates on every file system with quotas enabled.
Red Hat logoGithubRedditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

© 2024 Red Hat, Inc.