Este contenido no está disponible en el idioma seleccionado.

Chapter 74. Crypto (JCE) Component

Available as of Camel version 2.3

With Camel cryptographic endpoints and Java’s Cryptographic extension it is easy to create Digital Signatures for Exchanges. Camel provides a pair of flexible endpoints which get used in concert to create a signature for an exchange in one part of the exchange’s workflow and then verify the signature in a later part of the workflow.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-crypto</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

74.1. Introduction

Digital signatures make use of Asymmetric Cryptographic techniques to sign messages. From a (very) high level, the algorithms use pairs of complimentary keys with the special property that data encrypted with one key can only be decrypted with the other. One, the private key, is closely guarded and used to 'sign' the message while the other, public key, is shared around to anyone interested in verifying the signed messages. Messages are signed by using the private key to encrypting a digest of the message. This encrypted digest is transmitted along with the message. On the other side the verifier recalculates the message digest and uses the public key to decrypt the digest in the signature. If both digests match the verifier knows only the holder of the private key could have created the signature.

Camel uses the Signature service from the Java Cryptographic Extension to do all the heavy cryptographic lifting required to create exchange signatures. The following are some excellent resources for explaining the mechanics of Cryptography, Message digests and Digital Signatures and how to leverage them with the JCE.

Bruce Schneier’s Applied Cryptography
Beginning Cryptography with Java by David Hook
The ever insightful Wikipedia Digital_signatures

74.2. URI format

As mentioned Camel provides a pair of crypto endpoints to create and verify signatures

crypto:sign:name[?options]
crypto:verify:name[?options]

crypto:sign creates the signature and stores it in the Header keyed by the constant org.apache.camel.component.crypto.DigitalSignatureConstants.SIGNATURE, i.e. "CamelDigitalSignature".
crypto:verify will read in the contents of this header and do the verification calculation.

In order to correctly function, the sign and verify process needs a pair of keys to be shared, signing requiring a PrivateKey and verifying a PublicKey (or a Certificate containing one). Using the JCE it is very simple to generate these key pairs but it is usually most secure to use a KeyStore to house and share your keys. The DSL is very flexible about how keys are supplied and provides a number of mechanisms.

Note a crypto:sign endpoint is typically defined in one route and the complimentary crypto:verify in another, though for simplicity in the examples they appear one after the other. It goes without saying that both signing and verifying should be configured identically.

74.3. Options

The Crypto (JCE) component supports 2 options, which are listed below.

Name	Description	Default	Type
configuration (advanced)	To use the shared DigitalSignatureConfiguration as configuration		DigitalSignature Configuration
resolveProperty Placeholders (advanced)	Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.	true	boolean

The Crypto (JCE) endpoint is configured using URI syntax:

crypto:cryptoOperation:name

with the following path and query parameters:

74.3.1. Path Parameters (2 parameters):

Name	Description	Default	Type
cryptoOperation	Required Set the Crypto operation from that supplied after the crypto scheme in the endpoint uri e.g. crypto:sign sets sign as the operation.		CryptoOperation
name	Required The logical name of this operation.		String

74.3.2. Query Parameters (19 parameters):

Name	Description	Default	Type
algorithm (producer)	Sets the JCE name of the Algorithm that should be used for the signer.	SHA1WithDSA	String
alias (producer)	Sets the alias used to query the KeyStore for keys and link java.security.cert.Certificate Certificates to be used in signing and verifying exchanges. This value can be provided at runtime via the message header org.apache.camel.component.crypto.DigitalSignatureConstants#KEYSTORE_ALIAS		String
certificateName (producer)	Sets the reference name for a PrivateKey that can be fond in the registry.		String
keystore (producer)	Sets the KeyStore that can contain keys and Certficates for use in signing and verifying exchanges. A KeyStore is typically used with an alias, either one supplied in the Route definition or dynamically via the message header CamelSignatureKeyStoreAlias. If no alias is supplied and there is only a single entry in the Keystore, then this single entry will be used.		KeyStore
keystoreName (producer)	Sets the reference name for a Keystore that can be fond in the registry.		String
privateKey (producer)	Set the PrivateKey that should be used to sign the exchange		PrivateKey
privateKeyName (producer)	Sets the reference name for a PrivateKey that can be fond in the registry.		String
provider (producer)	Set the id of the security provider that provides the configured Signature algorithm.		String
publicKeyName (producer)	references that should be resolved when the context changes		String
secureRandomName (producer)	Sets the reference name for a SecureRandom that can be fond in the registry.		String
signatureHeaderName (producer)	Set the name of the message header that should be used to store the base64 encoded signature. This defaults to 'CamelDigitalSignature'		String
bufferSize (advanced)	Set the size of the buffer used to read in the Exchange payload data.	2048	Integer
certificate (advanced)	Set the Certificate that should be used to verify the signature in the exchange based on its payload.		Certificate
clearHeaders (advanced)	Determines if the Signature specific headers be cleared after signing and verification. Defaults to true, and should only be made otherwise at your extreme peril as vital private information such as Keys and passwords may escape if unset.	true	boolean
keyStoreParameters (advanced)	Sets the KeyStore that can contain keys and Certficates for use in signing and verifying exchanges based on the given KeyStoreParameters. A KeyStore is typically used with an alias, either one supplied in the Route definition or dynamically via the message header CamelSignatureKeyStoreAlias. If no alias is supplied and there is only a single entry in the Keystore, then this single entry will be used.		KeyStoreParameters
publicKey (advanced)	Set the PublicKey that should be used to verify the signature in the exchange.		PublicKey
secureRandom (advanced)	Set the SecureRandom used to initialize the Signature service		SecureRandom
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
password (security)	Sets the password used to access an aliased PrivateKey in the KeyStore.		String

74.4. Spring Boot Auto-Configuration

The component supports 33 options, which are listed below.

Name	Description	Default	Type
camel.component.crypto.configuration.algorithm	Sets the JCE name of the Algorithm that should be used for the signer.	SHA1WithDSA	String
camel.component.crypto.configuration.alias	Sets the alias used to query the KeyStore for keys and link java.security.cert.Certificate Certificates to be used in signing and verifying exchanges. This value can be provided at runtime via the message header org.apache.camel.component.crypto.DigitalSignatureConstants #KEYSTORE_ALIAS		String
camel.component.crypto.configuration.buffer-size	Set the size of the buffer used to read in the Exchange payload data.	2048	Integer
camel.component.crypto.configuration.certificate	Set the Certificate that should be used to verify the signature in the exchange based on its payload.		Certificate
camel.component.crypto.configuration.certificate-name	Sets the reference name for a PrivateKey that can be fond in the registry.		String
camel.component.crypto.configuration.clear-headers	Determines if the Signature specific headers be cleared after signing and verification. Defaults to true, and should only be made otherwise at your extreme peril as vital private information such as Keys and passwords may escape if unset.	true	Boolean
camel.component.crypto.configuration.crypto-operation	Set the Crypto operation from that supplied after the crypto scheme in the endpoint uri e.g. crypto:sign sets sign as the operation.		CryptoOperation
camel.component.crypto.configuration.key-store-parameters	Sets the KeyStore that can contain keys and Certficates for use in signing and verifying exchanges based on the given KeyStoreParameters. A KeyStore is typically used with an alias, either one supplied in the Route definition or dynamically via the message header CamelSignatureKeyStoreAlias. If no alias is supplied and there is only a single entry in the Keystore, then this single entry will be used.		KeyStoreParameters
camel.component.crypto.configuration.keystore	Sets the KeyStore that can contain keys and Certficates for use in signing and verifying exchanges. A KeyStore is typically used with an alias, either one supplied in the Route definition or dynamically via the message header CamelSignatureKeyStoreAlias. If no alias is supplied and there is only a single entry in the Keystore, then this single entry will be used.		KeyStore
camel.component.crypto.configuration.keystore-name	Sets the reference name for a Keystore that can be fond in the registry.		String
camel.component.crypto.configuration.name	The logical name of this operation.		String
camel.component.crypto.configuration.password	Sets the password used to access an aliased PrivateKey in the KeyStore.		Character[]
camel.component.crypto.configuration.private-key	Set the PrivateKey that should be used to sign the exchange		PrivateKey
camel.component.crypto.configuration.private-key-name	Sets the reference name for a PrivateKey that can be fond in the registry.		String
camel.component.crypto.configuration.provider	Set the id of the security provider that provides the configured Signature algorithm.		String
camel.component.crypto.configuration.public-key	Set the PublicKey that should be used to verify the signature in the exchange.		PublicKey
camel.component.crypto.configuration.public-key-name	references that should be resolved when the context changes		String
camel.component.crypto.configuration.secure-random	Set the SecureRandom used to initialize the Signature service		SecureRandom
camel.component.crypto.configuration.secure-random-name	Sets the reference name for a SecureRandom that can be fond in the registry.		String
camel.component.crypto.configuration.signature-header-name	Set the name of the message header that should be used to store the base64 encoded signature. This defaults to 'CamelDigitalSignature'		String
camel.component.crypto.enabled	Enable crypto component	true	Boolean
camel.component.crypto.resolve-property-placeholders	Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.	true	Boolean
camel.dataformat.crypto.algorithm	The JCE algorithm name indicating the cryptographic algorithm that will be used. Is by default DES/CBC/PKCS5Padding.	DES/CBC/PKCS5Padding	String
camel.dataformat.crypto.algorithm-parameter-ref	A JCE AlgorithmParameterSpec used to initialize the Cipher. Will lookup the type using the given name as a java.security.spec.AlgorithmParameterSpec type.		String
camel.dataformat.crypto.buffersize	The size of the buffer used in the signature process.		Integer
camel.dataformat.crypto.content-type-header	Whether the data format should set the Content-Type header with the type from the data format if the data format is capable of doing so. For example application/xml for data formats marshalling to XML, or application/json for data formats marshalling to JSon etc.	false	Boolean
camel.dataformat.crypto.crypto-provider	The name of the JCE Security Provider that should be used.		String
camel.dataformat.crypto.enabled	Enable crypto dataformat	true	Boolean
camel.dataformat.crypto.init-vector-ref	Refers to a byte array containing the Initialization Vector that will be used to initialize the Cipher.		String
camel.dataformat.crypto.inline	Flag indicating that the configured IV should be inlined into the encrypted data stream. Is by default false.	false	Boolean
camel.dataformat.crypto.key-ref	Refers to the secret key to lookup from the register to use.		String
camel.dataformat.crypto.mac-algorithm	The JCE algorithm name indicating the Message Authentication algorithm.	HmacSHA1	String
camel.dataformat.crypto.should-append-h-m-a-c	Flag indicating that a Message Authentication Code should be calculated and appended to the encrypted data.	false	Boolean

74.5. Using

74.5.1. Raw keys

The most basic way to way to sign and verify an exchange is with a KeyPair as follows.

The same can be achieved with the Spring XML Extensions using references to keys

74.5.2. KeyStores and Aliases.

The JCE provides a very versatile keystore concept for housing pairs of private keys and certificates, keeping them encrypted and password protected. They can be retrieved by applying an alias to the retrieval APIs. There are a number of ways to get keys and Certificates into a keystore, most often this is done with the external 'keytool' application. This is a good example of using keytool to create a KeyStore with a self signed Cert and Private key.

The examples use a Keystore with a key and cert aliased by 'bob'. The password for the keystore and the key is 'letmein'

The following shows how to use a Keystore via the Fluent builders, it also shows how to load and initialize the keystore.

Again in Spring a ref is used to lookup an actual keystore instance.

74.5.3. Changing JCE Provider and Algorithm

Changing the Signature algorithm or the Security provider is a simple matter of specifying their names. You will need to also use Keys that are compatible with the algorithm you choose.

74.5.4. Changing the Signature Message Header

It may be desirable to change the message header used to store the signature. A different header name can be specified in the route definition as follows

74.5.5. Changing the buffersize

In case you need to update the size of the buffer…

74.5.6. Supplying Keys dynamically.

When using a Recipient list or similar EIP the recipient of an exchange can vary dynamically. Using the same key across all recipients may be neither feasible nor desirable. It would be useful to be able to specify signature keys dynamically on a per-exchange basis. The exchange could then be dynamically enriched with the key of its target recipient prior to signing. To facilitate this the signature mechanisms allow for keys to be supplied dynamically via the message headers below

Exchange.SIGNATURE_PRIVATE_KEY, "CamelSignaturePrivateKey"
Exchange.SIGNATURE_PUBLIC_KEY_OR_CERT, "CamelSignaturePublicKeyOrCert"

Even better would be to dynamically supply a keystore alias. Again the alias can be supplied in a message header

Exchange.KEYSTORE_ALIAS, "CamelSignatureKeyStoreAlias"

The header would be set as follows

Exchange unsigned = getMandatoryEndpoint("direct:alias-sign").createExchange();
unsigned.getIn().setBody(payload);
unsigned.getIn().setHeader(DigitalSignatureConstants.KEYSTORE_ALIAS, "bob");
unsigned.getIn().setHeader(DigitalSignatureConstants.KEYSTORE_PASSWORD, "letmein".toCharArray());
template.send("direct:alias-sign", unsigned);
Exchange signed = getMandatoryEndpoint("direct:alias-sign").createExchange();
signed.getIn().copyFrom(unsigned.getOut());
signed.getIn().setHeader(KEYSTORE_ALIAS, "bob");
template.send("direct:alias-verify", signed);

74.6. See Also

Configuring Camel
Component
Endpoint
Getting Started