Este contenido no está disponible en el idioma seleccionado.

Chapter 240. Netty Component (deprecated)

Available as of Camel version 2.3

Warning

This component is deprecated. You should use Netty4.

The netty component in Camel is a socket communication component, based on the Netty project.

Netty is a NIO client server framework which enables quick and easy development of network applications such as protocol servers and clients.
Netty greatly simplifies and streamlines network programming such as TCP and UDP socket server.

This camel component supports both producer and consumer endpoints.

The Netty component has several options and allows fine-grained control of a number of TCP/UDP communication parameters (buffer sizes, keepAlives, tcpNoDelay etc) and facilitates both In-Only and In-Out communication on a Camel route.

Maven users will need to add the following dependency to their pom.xml for this component:

<dependency>
    <groupId>org.apache.camel</groupId>
    <artifactId>camel-netty</artifactId>
    <version>x.x.x</version>
    <!-- use the same version as your Camel core version -->
</dependency>

240.1. URI format

The URI scheme for a netty component is as follows

netty:tcp://0.0.0.0:99999[?options]
netty:udp://remotehost:99999/[?options]

This component supports producer and consumer endpoints for both TCP and UDP.

You can append query options to the URI in the following format, ?option=value&option=value&…

240.2. Options

The Netty component supports 4 options, which are listed below.

Name	Description	Default	Type
configuration (advanced)	To use the NettyConfiguration as configuration when creating endpoints.		NettyConfiguration
maximumPoolSize (advanced)	The core pool size for the ordered thread pool, if its in use. The default value is 16.	16	int
useGlobalSslContext Parameters (security)	Enable usage of global SSL context parameters.	false	boolean
resolveProperty Placeholders (advanced)	Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.	true	boolean

The Netty endpoint is configured using URI syntax:

netty:protocol:host:port

with the following path and query parameters:

240.2.1. Path Parameters (3 parameters):

Name	Description	Type
protocol	Required The protocol to use which can be tcp or udp.	String
host	Required The hostname. For the consumer the hostname is localhost or 0.0.0.0 For the producer the hostname is the remote host to connect to	String
port	Required The host port number	int

240.2.2. Query Parameters (67 parameters):

Name	Description	Default	Type
disconnect (common)	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	boolean
keepAlive (common)	Setting to ensure socket is not closed due to inactivity	true	boolean
reuseAddress (common)	Setting to facilitate socket multiplexing	true	boolean
sync (common)	Setting to set endpoint as one-way or request-response	true	boolean
tcpNoDelay (common)	Setting to improve TCP protocol performance	true	boolean
bridgeErrorHandler (consumer)	Allows for bridging the consumer to the Camel routing Error Handler, which mean any exceptions occurred while the consumer is trying to pickup incoming messages, or the likes, will now be processed as a message and handled by the routing Error Handler. By default the consumer will use the org.apache.camel.spi.ExceptionHandler to deal with exceptions, that will be logged at WARN or ERROR level and ignored.	false	boolean
broadcast (consumer)	Setting to choose Multicast over UDP	false	boolean
clientMode (consumer)	If the clientMode is true, netty consumer will connect the address as a TCP client.	false	boolean
backlog (consumer)	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.		int
bossCount (consumer)	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this operation to override the default bossCount from Netty	1	int
bossPool (consumer)	To use a explicit org.jboss.netty.channel.socket.nio.BossPool as the boss thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own boss pool with 1 core thread.		BossPool
channelGroup (consumer)	To use a explicit ChannelGroup.		ChannelGroup
disconnectOnNoReply (consumer)	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	boolean
exceptionHandler (consumer)	To let the consumer use a custom ExceptionHandler. Notice if the option bridgeErrorHandler is enabled then this option is not in use. By default the consumer will deal with exceptions, that will be logged at WARN or ERROR level and ignored.		ExceptionHandler
exchangePattern (consumer)	Sets the exchange pattern when the consumer creates an exchange.		ExchangePattern
maxChannelMemorySize (consumer)	The maximum total size of the queued events per channel when using orderedThreadPoolExecutor. Specify 0 to disable.	10485760	long
maxTotalMemorySize (consumer)	The maximum total size of the queued events for this pool when using orderedThreadPoolExecutor. Specify 0 to disable.	209715200	long
nettyServerBootstrapFactory (consumer)	To use a custom NettyServerBootstrapFactory		NettyServerBootstrap Factory
networkInterface (consumer)	When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.		String
noReplyLogLevel (consumer)	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.	WARN	LoggingLevel
orderedThreadPoolExecutor (consumer)	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel. See details at the netty javadoc of org.jboss.netty.handler.execution.OrderedMemoryAwareThreadPoolExecutor for more details.	true	boolean
serverClosedChannel ExceptionCaughtLogLevel (consumer)	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server.	DEBUG	LoggingLevel
serverExceptionCaughtLog Level (consumer)	If the server (NettyConsumer) catches an exception then its logged using this logging level.	WARN	LoggingLevel
serverPipelineFactory (consumer)	To use a custom ServerPipelineFactory		ServerPipelineFactory
workerCount (consumer)	When netty works on nio mode, it uses default workerCount parameter from Netty, which is cpu_core_threads2. User can use this operation to override the default workerCount from Netty		int
workerPool (consumer)	To use a explicit org.jboss.netty.channel.socket.nio.WorkerPool as the worker thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own worker pool with 2 x cpu count core threads.		WorkerPool
connectTimeout (producer)	Time to wait for a socket connection to be available. Value is in millis.	10000	long
requestTimeout (producer)	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.		long
clientPipelineFactory (producer)	To use a custom ClientPipelineFactory		ClientPipelineFactory
lazyChannelCreation (producer)	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	boolean
producerPoolEnabled (producer)	Whether producer pool is enabled or not. Important: Do not turn this off, as the pooling is needed for handling concurrency and reliable request/reply.	true	boolean
producerPoolMaxActive (producer)	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	int
producerPoolMaxIdle (producer)	Sets the cap on the number of idle instances in the pool.	100	int
producerPoolMinEvictable Idle (producer)	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000	long
producerPoolMinIdle (producer)	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.		int
udpConnectionlessSending (producer)	This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.	false	boolean
useChannelBuffer (producer)	If the useChannelBuffer is true, netty producer will turn the message body into ChannelBuffer before sending it out.	false	boolean
bootstrapConfiguration (advanced)	To use a custom configured NettyServerBootstrapConfiguration for configuring this endpoint.		NettyServerBootstrap Configuration
options (advanced)	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.		Map
receiveBufferSize (advanced)	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	long
receiveBufferSizePredictor (advanced)	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.		int
sendBufferSize (advanced)	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	long
synchronous (advanced)	Sets whether synchronous processing should be strictly used, or Camel is allowed to use asynchronous processing (if supported).	false	boolean
transferExchange (advanced)	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	boolean
allowDefaultCodec (codec)	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	boolean
autoAppendDelimiter (codec)	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	boolean
decoder (codec)	Deprecated A custom ChannelHandler class that can be used to perform special marshalling of inbound payloads. Must override org.jboss.netty.channel.ChannelUpStreamHandler.		ChannelHandler
decoderMaxLineLength (codec)	The max line length to use for the textline codec.	1024	int
decoders (codec)	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
delimiter (codec)	The delimiter to use for the textline codec. Possible values are LINE and NULL.	LINE	TextLineDelimiter
encoder (codec)	Deprecated A custom ChannelHandler class that can be used to perform special marshalling of outbound payloads. Must override org.jboss.netty.channel.ChannelDownStreamHandler.		ChannelHandler
encoders (codec)	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		String
encoding (codec)	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.		String
textline (codec)	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.	false	boolean
enabledProtocols (security)	Which protocols to enable when using SSL	TLSv1,TLSv1.1,TLSv1.2	String
keyStoreFile (security)	Client side certificate keystore to be used for encryption		File
keyStoreFormat (security)	Keystore format to be used for payload encryption. Defaults to JKS if not set	JKS	String
keyStoreResource (security)	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
needClientAuth (security)	Configures whether the server needs client authentication when using SSL.	false	boolean
passphrase (security)	Password setting to use in order to encrypt/decrypt payloads sent using SSH		String
securityProvider (security)	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	SunX509	String
ssl (security)	Setting to specify whether SSL encryption is applied to this endpoint	false	boolean
sslClientCertHeaders (security)	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	boolean
sslContextParameters (security)	To configure security using SSLContextParameters		SSLContextParameters
sslHandler (security)	Reference to a class that could be used to return an SSL Handler		SslHandler
trustStoreFile (security)	Server side certificate keystore to be used for encryption		File
trustStoreResource (security)	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String

240.3. Spring Boot Auto-Configuration

The component supports 70 options, which are listed below.

Name	Description	Default	Type
camel.component.netty.configuration.allow-default-codec	The netty component installs a default codec if both, encoder/decoder is null and textline is false. Setting allowDefaultCodec to false prevents the netty component from installing a default codec as the first element in the filter chain.	true	Boolean
camel.component.netty.configuration.auto-append-delimiter	Whether or not to auto append missing end delimiter when sending using the textline codec.	true	Boolean
camel.component.netty.configuration.backlog	Allows to configure a backlog for netty consumer (server). Note the backlog is just a best effort depending on the OS. Setting this option to a value such as 200, 500 or 1000, tells the TCP stack how long the accept queue can be If this option is not configured, then the backlog depends on OS setting.		Integer
camel.component.netty.configuration.boss-count	When netty works on nio mode, it uses default bossCount parameter from Netty, which is 1. User can use this operation to override the default bossCount from Netty	1	Integer
camel.component.netty.configuration.boss-pool	To use a explicit org.jboss.netty.channel.socket.nio.BossPool as the boss thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own boss pool with 1 core thread.		BossPool
camel.component.netty.configuration.broadcast	Setting to choose Multicast over UDP	false	Boolean
camel.component.netty.configuration.channel-group	To use a explicit ChannelGroup.		ChannelGroup
camel.component.netty.configuration.client-mode	If the clientMode is true, netty consumer will connect the address as a TCP client.	false	Boolean
camel.component.netty.configuration.client-pipeline-factory	To use a custom ClientPipelineFactory		ClientPipelineFactory
camel.component.netty.configuration.connect-timeout	Time to wait for a socket connection to be available. Value is in millis.	10000	Long
camel.component.netty.configuration.decoder-max-line-length	The max line length to use for the textline codec.	1024	Integer
camel.component.netty.configuration.decoders	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		List
camel.component.netty.configuration.delimiter	The delimiter to use for the textline codec. Possible values are LINE and NULL.		TextLineDelimiter
camel.component.netty.configuration.disconnect	Whether or not to disconnect(close) from Netty Channel right after use. Can be used for both consumer and producer.	false	Boolean
camel.component.netty.configuration.disconnect-on-no-reply	If sync is enabled then this option dictates NettyConsumer if it should disconnect where there is no reply to send back.	true	Boolean
camel.component.netty.configuration.enabled-protocols	Which protocols to enable when using SSL	TLSv1,TLSv1.1,TLSv1.2	String
camel.component.netty.configuration.encoders	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.		List
camel.component.netty.configuration.encoding	The encoding (a charset name) to use for the textline codec. If not provided, Camel will use the JVM default Charset.		String
camel.component.netty.configuration.host	The hostname. For the consumer the hostname is localhost or 0.0.0.0 For the producer the hostname is the remote host to connect to		String
camel.component.netty.configuration.keep-alive	Setting to ensure socket is not closed due to inactivity	true	Boolean
camel.component.netty.configuration.key-store-format	Keystore format to be used for payload encryption. Defaults to JKS if not set	JKS	String
camel.component.netty.configuration.key-store-resource	Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
camel.component.netty.configuration.lazy-channel-creation	Channels can be lazily created to avoid exceptions, if the remote server is not up and running when the Camel producer is started.	true	Boolean
camel.component.netty.configuration.max-channel-memory-size	The maximum total size of the queued events per channel when using orderedThreadPoolExecutor. Specify 0 to disable.	10485760	Long
camel.component.netty.configuration.max-total-memory-size	The maximum total size of the queued events for this pool when using orderedThreadPoolExecutor. Specify 0 to disable.	209715200	Long
camel.component.netty.configuration.need-client-auth	Configures whether the server needs client authentication when using SSL.	false	Boolean
camel.component.netty.configuration.netty-server-bootstrap-factory	To use a custom NettyServerBootstrapFactory		NettyServerBootstrap Factory
camel.component.netty.configuration.network-interface	When using UDP then this option can be used to specify a network interface by its name, such as eth0 to join a multicast group.		String
camel.component.netty.configuration.no-reply-log-level	If sync is enabled this option dictates NettyConsumer which logging level to use when logging a there is no reply to send back.		LoggingLevel
camel.component.netty.configuration.options	Allows to configure additional netty options using option. as prefix. For example option.child.keepAlive=false to set the netty option child.keepAlive=false. See the Netty documentation for possible options that can be used.		Map
camel.component.netty.configuration.ordered-thread-pool-executor	Whether to use ordered thread pool, to ensure events are processed orderly on the same channel. See details at the netty javadoc of org.jboss .netty.handler.execution.OrderedMemoryAwareThreadPoolExecutor for more details.	true	Boolean
camel.component.netty.configuration.passphrase	Password setting to use in order to encrypt/decrypt payloads sent using SSH		String
camel.component.netty.configuration.port	The host port number		Integer
camel.component.netty.configuration.producer-pool-enabled	Whether producer pool is enabled or not. Important: Do not turn this off, as the pooling is needed for handling concurrency and reliable request/reply.	true	Boolean
camel.component.netty.configuration.producer-pool-max-active	Sets the cap on the number of objects that can be allocated by the pool (checked out to clients, or idle awaiting checkout) at a given time. Use a negative value for no limit.	-1	Integer
camel.component.netty.configuration.producer-pool-max-idle	Sets the cap on the number of idle instances in the pool.	100	Integer
camel.component.netty.configuration.producer-pool-min-evictable-idle	Sets the minimum amount of time (value in millis) an object may sit idle in the pool before it is eligible for eviction by the idle object evictor.	300000	Long
camel.component.netty.configuration.producer-pool-min-idle	Sets the minimum number of instances allowed in the producer pool before the evictor thread (if active) spawns new objects.		Integer
camel.component.netty.configuration.protocol	The protocol to use which can be tcp or udp.		String
camel.component.netty.configuration.receive-buffer-size	The TCP/UDP buffer sizes to be used during inbound communication. Size is bytes.	65536	Long
camel.component.netty.configuration.receive-buffer-size-predictor	Configures the buffer size predictor. See details at Jetty documentation and this mail thread.		Integer
camel.component.netty.configuration.request-timeout	Allows to use a timeout for the Netty producer when calling a remote server. By default no timeout is in use. The value is in milli seconds, so eg 30000 is 30 seconds. The requestTimeout is using Netty’s ReadTimeoutHandler to trigger the timeout.		Long
camel.component.netty.configuration.reuse-address	Setting to facilitate socket multiplexing	true	Boolean
camel.component.netty.configuration.security-provider	Security provider to be used for payload encryption. Defaults to SunX509 if not set.	SunX509	String
camel.component.netty.configuration.send-buffer-size	The TCP/UDP buffer sizes to be used during outbound communication. Size is bytes.	65536	Long
camel.component.netty.configuration.server-closed-channel-exception-caught-log-level	If the server (NettyConsumer) catches an java.nio.channels.ClosedChannelException then its logged using this logging level. This is used to avoid logging the closed channel exceptions, as clients can disconnect abruptly and then cause a flood of closed exceptions in the Netty server.		LoggingLevel
camel.component.netty.configuration.server-exception-caught-log-level	If the server (NettyConsumer) catches an exception then its logged using this logging level.		LoggingLevel
camel.component.netty.configuration.server-pipeline-factory	To use a custom ServerPipelineFactory		ServerPipelineFactory
camel.component.netty.configuration.ssl	Setting to specify whether SSL encryption is applied to this endpoint	false	Boolean
camel.component.netty.configuration.ssl-client-cert-headers	When enabled and in SSL mode, then the Netty consumer will enrich the Camel Message with headers having information about the client certificate such as subject name, issuer name, serial number, and the valid date range.	false	Boolean
camel.component.netty.configuration.ssl-context-parameters	To configure security using SSLContextParameters		SSLContextParameters
camel.component.netty.configuration.ssl-handler	Reference to a class that could be used to return an SSL Handler		SslHandler
camel.component.netty.configuration.sync	Setting to set endpoint as one-way or request-response	true	Boolean
camel.component.netty.configuration.tcp-no-delay	Setting to improve TCP protocol performance	true	Boolean
camel.component.netty.configuration.textline	Only used for TCP. If no codec is specified, you can use this flag to indicate a text line based codec; if not specified or the value is false, then Object Serialization is assumed over TCP.	false	Boolean
camel.component.netty.configuration.transfer-exchange	Only used for TCP. You can transfer the exchange over the wire instead of just the body. The following fields are transferred: In body, Out body, fault body, In headers, Out headers, fault headers, exchange properties, exchange exception. This requires that the objects are serializable. Camel will exclude any non-serializable objects and log it at WARN level.	false	Boolean
camel.component.netty.configuration.trust-store-resource	Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with classpath:, file:, or http: to load the resource from different systems.		String
camel.component.netty.configuration.udp-connectionless-sending	This option supports connection less udp sending which is a real fire and forget. A connected udp send receive the PortUnreachableException if no one is listen on the receiving port.	false	Boolean
camel.component.netty.configuration.use-channel-buffer	If the useChannelBuffer is true, netty producer will turn the message body into ChannelBuffer before sending it out.	false	Boolean
camel.component.netty.configuration.worker-count	When netty works on nio mode, it uses default workerCount parameter from Netty, which is cpu_core_threads2. User can use this operation to override the default workerCount from Netty		Integer
camel.component.netty.configuration.worker-pool	To use a explicit org.jboss.netty.channel.socket.nio.WorkerPool as the worker thread pool. For example to share a thread pool with multiple consumers. By default each consumer has their own worker pool with 2 x cpu count core threads.		WorkerPool
camel.component.netty.enabled	Enable netty component	true	Boolean
camel.component.netty.maximum-pool-size	The core pool size for the ordered thread pool, if its in use. The default value is 16.	16	Integer
camel.component.netty.resolve-property-placeholders	Whether the component should resolve property placeholders on itself when starting. Only properties which are of String type can use property placeholders.	true	Boolean
camel.component.netty.use-global-ssl-context-parameters	Enable usage of global SSL context parameters.	false	Boolean
camel.component.netty.configuration.decoder	A custom ChannelHandler class that can be used to perform special marshalling of inbound payloads. Must override org.jboss.netty.channel.ChannelUpStreamHandler.		ChannelHandler
camel.component.netty.configuration.encoder	A custom ChannelHandler class that can be used to perform special marshalling of outbound payloads. Must override org.jboss.netty.channel.ChannelDownStreamHandler.		ChannelHandler
camel.component.netty.configuration.key-store-file	Client side certificate keystore to be used for encryption		File
camel.component.netty.configuration.maximum-pool-size			Integer
camel.component.netty.configuration.trust-store-file	Server side certificate keystore to be used for encryption		File

240.4. Registry based Options

Codec Handlers and SSL Keystores can be enlisted in the Registry, such as in the Spring XML file. The values that could be passed in, are the following:

Name	Description
`passphrase`	password setting to use in order to encrypt/decrypt payloads sent using SSH
`keyStoreFormat`	keystore format to be used for payload encryption. Defaults to "JKS" if not set
`securityProvider`	Security provider to be used for payload encryption. Defaults to "SunX509" if not set.
`keyStoreFile`	deprecated: Client side certificate keystore to be used for encryption
`trustStoreFile`	deprecated: Server side certificate keystore to be used for encryption
`keyStoreResource`	Camel 2.11.1: Client side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with `"classpath:"`, `"file:"`, or `"http:"` to load the resource from different systems.
`trustStoreResource`	Camel 2.11.1: Server side certificate keystore to be used for encryption. Is loaded by default from classpath, but you can prefix with `"classpath:"`, `"file:"`, or `"http:"` to load the resource from different systems.
`sslHandler`	Reference to a class that could be used to return an SSL Handler
`encoder`	A custom `ChannelHandler` class that can be used to perform special marshalling of outbound payloads. Must override `org.jboss.netty.channel.ChannelDownStreamHandler`.
`encorders`	A list of encoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.
`decoder`	A custom `ChannelHandler` class that can be used to perform special marshalling of inbound payloads. Must override `org.jboss.netty.channel.ChannelUpStreamHandler`.
`decoders`	A list of decoders to be used. You can use a String which have values separated by comma, and have the values be looked up in the Registry. Just remember to prefix the value with # so Camel knows it should lookup.

Important: Read below about using non-shareable encoders/decoders.

240.4.1. Using non-shareable encoders or decoders

If your encoders or decoders is not shareable (eg they have the @Shareable class annotation), then your encoder/decoder must implement the org.apache.camel.component.netty.ChannelHandlerFactory interface, and return a new instance in the newChannelHandler method. This is to ensure the encoder/decoder can safely be used. If this is not the case, then the Netty component will log a WARN when
an endpoint is created.

The Netty component offers a org.apache.camel.component.netty.ChannelHandlerFactories factory class, that has a number of commonly used methods.

240.5. Sending Messages to/from a Netty endpoint

240.5.1. Netty Producer

In Producer mode, the component provides the ability to send payloads to a socket endpoint
using either TCP or UDP protocols (with optional SSL support).

The producer mode supports both one-way and request-response based operations.

240.5.2. Netty Consumer

In Consumer mode, the component provides the ability to:

listen on a specified socket using either TCP or UDP protocols (with optional SSL support),
receive requests on the socket using text/xml, binary and serialized object based payloads and
send them along on a route as message exchanges.

The consumer mode supports both one-way and request-response based operations.

240.6. Headers

The following headers are filled for the exchanges created by the Netty consumer:

Header key	Class	Description
`NettyConstants.NETTY_CHANNEL_HANDLER_CONTEXT` / `CamelNettyChannelHandlerContext`	`org.jboss.netty.channel.ChannelHandlerContext`	`ChannelHandlerContext `instance associated with the connection received by netty.
`NettyConstants.NETTY_MESSAGE_EVENT` / `CamelNettyMessageEvent`	`org.jboss.netty.channel.MessageEvent`	`MessageEvent `instance associated with the connection received by netty.
`NettyConstants.NETTY_REMOTE_ADDRESS` / `CamelNettyRemoteAddress`	`java.net.SocketAddress`	Remote address of the incoming socket connection.
`NettyConstants.NETTY_LOCAL_ADDRESS` / `CamelNettyLocalAddress`	`java.net.SocketAddress`	Local address of the incoming socket connection.

240.7. Usage Samples

240.7.1. A UDP Netty endpoint using Request-Reply and serialized object payload

RouteBuilder builder = new RouteBuilder() {
  public void configure() {
    from("netty:udp://0.0.0.0:5155?sync=true")
      .process(new Processor() {
         public void process(Exchange exchange) throws Exception {
           Poetry poetry = (Poetry) exchange.getIn().getBody();
           poetry.setPoet("Dr. Sarojini Naidu");
           exchange.getOut().setBody(poetry);
         }
       }
    }
};

240.7.2. A TCP based Netty consumer endpoint using One-way communication

RouteBuilder builder = new RouteBuilder() {
  public void configure() {
       from("netty:tcp://0.0.0.0:5150")
           .to("mock:result");
  }
};

240.7.3. An SSL/TCP based Netty consumer endpoint using Request-Reply communication

Using the JSSE Configuration Utility

As of Camel 2.9, the Netty component supports SSL/TLS configuration through the Camel JSSE Configuration Utility. This utility greatly decreases the amount of component specific code you need to write and is configurable at the endpoint and component levels. The following examples demonstrate how to use the utility with the Netty component.

Programmatic configuration of the component

KeyStoreParameters ksp = new KeyStoreParameters();
ksp.setResource("/users/home/server/keystore.jks");
ksp.setPassword("keystorePassword");

KeyManagersParameters kmp = new KeyManagersParameters();
kmp.setKeyStore(ksp);
kmp.setKeyPassword("keyPassword");

SSLContextParameters scp = new SSLContextParameters();
scp.setKeyManagers(kmp);

NettyComponent nettyComponent = getContext().getComponent("netty", NettyComponent.class);
nettyComponent.setSslContextParameters(scp);

Spring DSL based configuration of endpoint

...
  <camel:sslContextParameters
      id="sslContextParameters">
    <camel:keyManagers
        keyPassword="keyPassword">
      <camel:keyStore
          resource="/users/home/server/keystore.jks"
          password="keystorePassword"/>
    </camel:keyManagers>
  </camel:sslContextParameters>...
...
  <to uri="netty:tcp://0.0.0.0:5150?sync=true&ssl=true&sslContextParameters=#sslContextParameters"/>
...

Using Basic SSL/TLS configuration on the Jetty Component

JndiRegistry registry = new JndiRegistry(createJndiContext());
registry.bind("password", "changeit");
registry.bind("ksf", new File("src/test/resources/keystore.jks"));
registry.bind("tsf", new File("src/test/resources/keystore.jks"));

context.createRegistry(registry);
context.addRoutes(new RouteBuilder() {
  public void configure() {
      String netty_ssl_endpoint =
         "netty:tcp://0.0.0.0:5150?sync=true&ssl=true&passphrase=#password"
         + "&keyStoreFile=#ksf&trustStoreFile=#tsf";
      String return_string =
         "When You Go Home, Tell Them Of Us And Say,"
         + "For Your Tomorrow, We Gave Our Today.";

      from(netty_ssl_endpoint)
       .process(new Processor() {
          public void process(Exchange exchange) throws Exception {
            exchange.getOut().setBody(return_string);
          }
       }
  }
});

Getting access to SSLSession and the client certificate

Available as of Camel 2.12

You can get access to the javax.net.ssl.SSLSession if you eg need to get details about the client certificate. When ssl=true then the Netty component will store the SSLSession as a header on the Camel Message as shown below:

SSLSession session = exchange.getIn().getHeader(NettyConstants.NETTY_SSL_SESSION, SSLSession.class);
// get the first certificate which is client certificate
javax.security.cert.X509Certificate cert = session.getPeerCertificateChain()[0];
Principal principal = cert.getSubjectDN();

Remember to set needClientAuth=true to authenticate the client, otherwise SSLSession cannot access information about the client certificate, and you may get an exception javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated. You may also get this exception if the client certificate is expired or not valid etc.

Tip

The option sslClientCertHeaders can be set to true which then enriches the Camel Message with headers having details about the client certificate. For example the subject name is readily available in the header CamelNettySSLClientCertSubjectName.

240.7.4. Using Multiple Codecs

In certain cases it may be necessary to add chains of encoders and decoders to the netty pipeline. To add multiple codecs to a camel netty endpoint the 'encoders' and 'decoders' uri parameters should be used. Like the 'encoder' and 'decoder' parameters they are used to supply references (to lists of ChannelUpstreamHandlers and ChannelDownstreamHandlers) that should be added to the pipeline. Note that if encoders is specified then the encoder param will be ignored, similarly for decoders and the decoder param.

Note

Read further above about using non-shareable encoders/decoders.

The lists of codecs need to be added to the Camel’s registry so they can be resolved when the endpoint is created.

Spring’s native collections support can be used to specify the codec lists in an application context

The bean names can then be used in netty endpoint definitions either as a comma separated list or contained in a List e.g.

or via spring.

240.8. Closing Channel When Complete

When acting as a server you sometimes want to close the channel when, for example, a client conversion is finished.
You can do this by simply setting the endpoint option disconnect=true.

However you can also instruct Camel on a per message basis as follows.
To instruct Camel to close the channel, you should add a header with the key CamelNettyCloseChannelWhenComplete set to a boolean true value.
For instance, the example below will close the channel after it has written the bye message back to the client:

        from("netty:tcp://0.0.0.0:8080").process(new Processor() {
            public void process(Exchange exchange) throws Exception {
                String body = exchange.getIn().getBody(String.class);
                exchange.getOut().setBody("Bye " + body);
                // some condition which determines if we should close
                if (close) {
                    exchange.getOut().setHeader(NettyConstants.NETTY_CLOSE_CHANNEL_WHEN_COMPLETE, true);
                }
            }
        });

240.9. Adding custom channel pipeline factories to gain complete control over a created pipeline

Available as of Camel 2.5

Custom channel pipelines provide complete control to the user over the handler/interceptor chain by inserting custom handler(s), encoder(s) & decoders without having to specify them in the Netty Endpoint URL in a very simple way.

In order to add a custom pipeline, a custom channel pipeline factory must be created and registered with the context via the context registry (JNDIRegistry,or the camel-spring ApplicationContextRegistry etc).

A custom pipeline factory must be constructed as follows

A Producer linked channel pipeline factory must extend the abstract class ClientPipelineFactory.
A Consumer linked channel pipeline factory must extend the abstract class ServerPipelineFactory.
The classes should override the getPipeline() method in order to insert custom handler(s), encoder(s) and decoder(s). Not overriding the getPipeline() method creates a pipeline with no handlers, encoders or decoders wired to the pipeline.

The example below shows how ServerChannel Pipeline factory may be created

Using custom pipeline factory

public class SampleServerChannelPipelineFactory extends ServerPipelineFactory {
    private int maxLineSize = 1024;

    public ChannelPipeline getPipeline() throws Exception {
        ChannelPipeline channelPipeline = Channels.pipeline();

        channelPipeline.addLast("encoder-SD", new StringEncoder(CharsetUtil.UTF_8));
        channelPipeline.addLast("decoder-DELIM", new DelimiterBasedFrameDecoder(maxLineSize, true, Delimiters.lineDelimiter()));
        channelPipeline.addLast("decoder-SD", new StringDecoder(CharsetUtil.UTF_8));
        // here we add the default Camel ServerChannelHandler for the consumer, to allow Camel to route the message etc.
        channelPipeline.addLast("handler", new ServerChannelHandler(consumer));

        return channelPipeline;
    }
}

The custom channel pipeline factory can then be added to the registry and instantiated/utilized on a camel route in the following way

Registry registry = camelContext.getRegistry();
serverPipelineFactory = new TestServerChannelPipelineFactory();
registry.bind("spf", serverPipelineFactory);
context.addRoutes(new RouteBuilder() {
  public void configure() {
      String netty_ssl_endpoint =
         "netty:tcp://0.0.0.0:5150?serverPipelineFactory=#spf"
      String return_string =
         "When You Go Home, Tell Them Of Us And Say,"
         + "For Your Tomorrow, We Gave Our Today.";

      from(netty_ssl_endpoint)
       .process(new Processor() {
          public void process(Exchange exchange) throws Exception {
            exchange.getOut().setBody(return_string);
          }
       }
  }
});

240.10. Reusing Netty boss and worker thread pools

Available as of Camel 2.12

Netty has two kind of thread pools: boss and worker. By default each Netty consumer and producer has their private thread pools. If you want to reuse these thread pools among multiple consumers or producers then the thread pools must be created and enlisted in the Registry.

For example using Spring XML we can create a shared worker thread pool using the NettyWorkerPoolBuilder with 2 worker threads as shown below:

  <!-- use the worker pool builder to help create the shared thread pool -->
  <bean id="poolBuilder" class="org.apache.camel.component.netty.NettyWorkerPoolBuilder">
    <property name="workerCount" value="2"/>
  </bean>

  <!-- the shared worker thread pool -->
  <bean id="sharedPool" class="org.jboss.netty.channel.socket.nio.WorkerPool"
        factory-bean="poolBuilder" factory-method="build" destroy-method="shutdown">
  </bean>

Tip

For boss thread pool there is a org.apache.camel.component.netty.NettyServerBossPoolBuilder builder for Netty consumers, and a org.apache.camel.component.netty.NettyClientBossPoolBuilder for the Netty producers.

Then in the Camel routes we can refer to this worker pools by configuring the workerPool option in the URI as shown below:

    <route>
      <from uri="netty:tcp://0.0.0.0:5021?textline=true&amp;sync=true&amp;workerPool=#sharedPool&amp;orderedThreadPoolExecutor=false"/>
      <to uri="log:result"/>
      ...
    </route>

And if we have another route we can refer to the shared worker pool:

    <route>
      <from uri="netty:tcp://0.0.0.0:5022?textline=true&amp;sync=true&amp;workerPool=#sharedPool&amp;orderedThreadPoolExecutor=false"/>
      <to uri="log:result"/>
      ...
    </route>

and so forth.

240.11. See Also

Configuring Camel
Component
Endpoint
Getting Started
Netty HTTP
MINA