ApoyoConsolaDesarrolladoresIniciar una pruebaContacto

Este contenido no está disponible en el idioma seleccionado.

Chapter 65. registered

This chapter describes the commands under the registered command.

65.1. registered limit create

Create a registered limit

Usage:

openstack registered limit create [-h]
                                         [-f {json,shell,table,value,yaml}]
                                         [-c COLUMN] [--noindent]
                                         [--prefix PREFIX]
                                         [--max-width <integer>] [--fit-width]
                                         [--print-empty]
                                         [--description <description>]
                                         [--region <region>] --service
                                         <service> --default-limit
                                         <default-limit>
                                         <resource-name>

Table 65.1. Positional arguments
ValueSummary

<resource-name>

The name of the resource to limit

Table 65.2. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--description <description>

Description of the registered limit

--region <region>

Region for the registered limit to affect

--service <service>

Service responsible for the resource to limit (required)

--default-limit <default-limit>

The default limit for the resources to assume (required)

Table 65.3. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 65.4. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 65.5. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 65.6. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

65.2. registered limit delete

Delete a registered limit

Usage:

openstack registered limit delete [-h]
                                         <registered-limit-id>
                                         [<registered-limit-id> ...]

Table 65.7. Positional arguments
ValueSummary

<registered-limit-id>

Registered limit to delete (id)

Table 65.8. Command arguments
ValueSummary

-h, --help

Show this help message and exit

65.3. registered limit list

List registered limits

Usage:

openstack registered limit list [-h] [-f {csv,json,table,value,yaml}]
                                       [-c COLUMN]
                                       [--quote {all,minimal,none,nonnumeric}]
                                       [--noindent] [--max-width <integer>]
                                       [--fit-width] [--print-empty]
                                       [--sort-column SORT_COLUMN]
                                       [--sort-ascending | --sort-descending]
                                       [--service <service>]
                                       [--resource-name <resource-name>]
                                       [--region <region>]

Table 65.9. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--service <service>

Service responsible for the resource to limit

--resource-name <resource-name>

The name of the resource to limit

--region <region>

Region for the limit to affect.

Table 65.10. Output formatter options
ValueSummary

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

Table 65.11. CSV formatter options
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 65.12. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 65.13. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

65.4. registered limit set

Update information about a registered limit

Usage:

openstack registered limit set [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--noindent]
                                      [--prefix PREFIX]
                                      [--max-width <integer>] [--fit-width]
                                      [--print-empty] [--service <service>]
                                      [--resource-name <resource-name>]
                                      [--default-limit <default-limit>]
                                      [--description <description>]
                                      [--region <region>]
                                      <registered-limit-id>

Table 65.14. Positional arguments
ValueSummary

<registered-limit-id>

Registered limit to update (id)

Table 65.15. Command arguments
ValueSummary

-h, --help

Show this help message and exit

--service <service>

Service to be updated responsible for the resource to limit. Either --service, --resource-name or --region must be different than existing value otherwise it will be duplicate entry

--resource-name <resource-name>

Resource to be updated responsible for the resource to limit. Either --service, --resource-name or --region must be different than existing value otherwise it will be duplicate entry

--default-limit <default-limit>

The default limit for the resources to assume

--description <description>

Description to update of the registered limit

--region <region>

Region for the registered limit to affect. either --service, --resource-name or --region must be different than existing value otherwise it will be duplicate entry

Table 65.16. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 65.17. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 65.18. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 65.19. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

65.5. registered limit show

Display registered limit details

Usage:

openstack registered limit show [-h] [-f {json,shell,table,value,yaml}]
                                       [-c COLUMN] [--noindent]
                                       [--prefix PREFIX]
                                       [--max-width <integer>] [--fit-width]
                                       [--print-empty]
                                       <registered-limit-id>

Table 65.20. Positional arguments
ValueSummary

<registered-limit-id>

Registered limit to display (id)

Table 65.21. Command arguments
ValueSummary

-h, --help

Show this help message and exit

Table 65.22. Output formatter options
ValueSummary

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

Table 65.23. JSON formatter options
ValueSummary

--noindent

Whether to disable indenting the json

Table 65.24. Shell formatter options
ValueSummary

--prefix PREFIX

Add a prefix to all variable names

Table 65.25. Table formatter options
ValueSummary

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

Red Hat logoGithubRedditYoutubeTwitter

Aprender

Pruebe, compre y venda

Comunidades

Acerca de la documentación de Red Hat

Ayudamos a los usuarios de Red Hat a innovar y alcanzar sus objetivos con nuestros productos y servicios con contenido en el que pueden confiar.

Hacer que el código abierto sea más inclusivo

Red Hat se compromete a reemplazar el lenguaje problemático en nuestro código, documentación y propiedades web. Para más detalles, consulte el Blog de Red Hat.

Acerca de Red Hat

Ofrecemos soluciones reforzadas que facilitan a las empresas trabajar en plataformas y entornos, desde el centro de datos central hasta el perímetro de la red.

© 2024 Red Hat, Inc.