Este contenido no está disponible en el idioma seleccionado.
Chapter 69. router
This chapter describes the commands under the router
command.
69.1. router add port
Add a port to a router
Usage:
openstack router add port [-h] <router> <port>
Value | Summary |
---|---|
<router> | Router to which port will be added (name or id) |
<port> | Port to be added (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
69.2. router add route
Add extra static routes to a router’s routing table.
Usage:
openstack router add route [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--route destination=<subnet>,gateway=<ip-address>] <router>
Value | Summary |
---|---|
<router> | Router to which extra static routes will be added (name or ID). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--route destination=<subnet>,gateway=<ip-address> | Add extra static route to the router. destination: destination subnet (in CIDR notation), gateway: nexthop IP address. Repeat option to add multiple routes. Trying to add a route that’s already present (exactly, including destination and nexthop) in the routing table is allowed and is considered a successful operation. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
69.3. router add subnet
Add a subnet to a router
Usage:
openstack router add subnet [-h] <router> <subnet>
Value | Summary |
---|---|
<router> | Router to which subnet will be added (name or id) |
<subnet> | Subnet to be added (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
69.4. router create
Create a new router
Usage:
openstack router create [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--enable | --disable] [--distributed | --centralized] [--ha | --no-ha] [--description <description>] [--project <project>] [--project-domain <project-domain>] [--availability-zone-hint <availability-zone>] [--tag <tag> | --no-tag] [--flavor-id <flavor-id>] <name>
Value | Summary |
---|---|
<name> | New router name |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--enable | Enable router (default) |
--disable | Disable router |
--distributed | Create a distributed router |
--centralized | Create a centralized router |
--ha | Create a highly available router |
--no-ha | Create a legacy router |
--description <description> | Set router description |
--project <project> | Owner’s project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or id). this can be used in case collisions between project names exist. |
--availability-zone-hint <availability-zone> | Availability zone in which to create this router (Router Availability Zone extension required, repeat option to set multiple availability zones) |
--tag <tag> | Tag to be added to the router (repeat option to set multiple tags) |
--no-tag | No tags associated with the router |
--flavor-id <flavor-id> | Associate the router to a flavor by id |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
69.5. router delete
Delete router(s)
Usage:
openstack router delete [-h] <router> [<router> ...]
Value | Summary |
---|---|
<router> | Router(s) to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
69.6. router list
List routers
Usage:
openstack router list [-h] [-f {csv,json,table,value,yaml}] [-c COLUMN] [--quote {all,minimal,none,nonnumeric}] [--noindent] [--max-width <integer>] [--fit-width] [--print-empty] [--sort-column SORT_COLUMN] [--sort-ascending | --sort-descending] [--name <name>] [--enable | --disable] [--long] [--project <project>] [--project-domain <project-domain>] [--agent <agent-id>] [--tags <tag>[,<tag>,...]] [--any-tags <tag>[,<tag>,...]] [--not-tags <tag>[,<tag>,...]] [--not-any-tags <tag>[,<tag>,...]]
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | List routers according to their name |
--enable | List enabled routers |
--disable | List disabled routers |
--long | List additional fields in output |
--project <project> | List routers according to their project (name or id) |
--project-domain <project-domain> | Domain the project belongs to (name or id). this can be used in case collisions between project names exist. |
--agent <agent-id> | List routers hosted by an agent (id only) |
--tags <tag>[,<tag>,…] | List routers which have all given tag(s) (comma- separated list of tags) |
--any-tags <tag>[,<tag>,…] | List routers which have any given tag(s) (comma- separated list of tags) |
--not-tags <tag>[,<tag>,…] | Exclude routers which have all given tag(s) (comma- separated list of tags) |
--not-any-tags <tag>[,<tag>,…] | Exclude routers which have any given tag(s) (comma- separated list of tags) |
Value | Summary |
---|---|
-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
--sort-ascending | Sort the column(s) in ascending order |
--sort-descending | Sort the column(s) in descending order |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
69.7. router remove port
Remove a port from a router
Usage:
openstack router remove port [-h] <router> <port>
Value | Summary |
---|---|
<router> | Router from which port will be removed (name or id) |
<port> | Port to be removed and deleted (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
69.8. router remove route
Remove extra static routes from a router’s routing table.
Usage:
openstack router remove route [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] [--route destination=<subnet>,gateway=<ip-address>] <router>
Value | Summary |
---|---|
<router> | Router from which extra static routes will be removed (name or ID). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--route destination=<subnet>,gateway=<ip-address> | Remove extra static route from the router. destination: destination subnet (in CIDR notation), gateway: nexthop IP address. Repeat option to remove multiple routes. Trying to remove a route that’s already missing (fully, including destination and nexthop) from the routing table is allowed and is considered a successful operation. |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
69.9. router remove subnet
Remove a subnet from a router
Usage:
openstack router remove subnet [-h] <router> <subnet>
Value | Summary |
---|---|
<router> | Router from which the subnet will be removed (name or id) |
<subnet> | Subnet to be removed (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
69.10. router set
Set router properties
Usage:
openstack router set [-h] [--name <name>] [--description <description>] [--enable | --disable] [--distributed | --centralized] [--route destination=<subnet>,gateway=<ip-address>] [--no-route] [--ha | --no-ha] [--external-gateway <network>] [--fixed-ip subnet=<subnet>,ip-address=<ip-address>] [--enable-snat | --disable-snat] [--qos-policy <qos-policy> | --no-qos-policy] [--tag <tag>] [--no-tag] <router>
Value | Summary |
---|---|
<router> | Router to modify (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set router name |
--description <description> | Set router description |
--enable | Enable router |
--disable | Disable router |
--distributed | Set router to distributed mode (disabled router only) |
--centralized | Set router to centralized mode (disabled router only) |
--route destination=<subnet>,gateway=<ip-address> | Add routes to the router destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to add multiple routes). This is deprecated in favor of router add/remove route since it is prone to race conditions between concurrent clients when not used together with --no-route to overwrite the current value of routes. |
--no-route | Clear routes associated with the router. specify both --route and --no-route to overwrite current value of routes. |
--ha | Set the router as highly available (disabled router only) |
--no-ha | Clear high availability attribute of the router (disabled router only) |
--external-gateway <network> | External network used as router’s gateway (name or id) |
--fixed-ip subnet=<subnet>,ip-address=<ip-address> | Desired ip and/or subnet (name or id) on external gateway: subnet=<subnet>,ip-address=<ip-address> (repeat option to set multiple fixed IP addresses) |
--enable-snat | Enable source nat on external gateway |
--disable-snat | Disable source nat on external gateway |
--qos-policy <qos-policy> | Attach qos policy to router gateway ips |
--no-qos-policy | Remove qos policy from router gateway ips |
--tag <tag> | Tag to be added to the router (repeat option to set multiple tags) |
--no-tag | Clear tags associated with the router. specify both --tag and --no-tag to overwrite current tags |
69.11. router show
Display router details
Usage:
openstack router show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <router>
Value | Summary |
---|---|
<router> | Router to display (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated to show multiple columns |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
69.12. router unset
Unset router properties
Usage:
openstack router unset [-h] [--route destination=<subnet>,gateway=<ip-address>] [--external-gateway] [--qos-policy] [--tag <tag> | --all-tag] <router>
Value | Summary |
---|---|
<router> | Router to modify (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--route destination=<subnet>,gateway=<ip-address> | Routes to be removed from the router destination: destination subnet (in CIDR notation) gateway: nexthop IP address (repeat option to unset multiple routes) |
--external-gateway | Remove external gateway information from the router |
--qos-policy | Remove qos policy from router gateway ips |
--tag <tag> | Tag to be removed from the router (repeat option to remove multiple tags) |
--all-tag | Clear all tags associated with the router |