Ce contenu n'est pas disponible dans la langue sélectionnée.
4.17. Hewlett-Packard iLO MP
Table 4.18, “HP iLO (Integrated Lights Out) MP” lists the fence device parameters used by
fence_ilo_mp, the fence agent for HP iLO MP devices.
| luci Field | cluster.conf Attribute | Description |
|---|---|---|
| Name | name | A name for the server with HP iLO support. |
| IP Address or Hostname | ipaddr | The IP address or host name assigned to the device. |
| IP Port (optional) | ipport | TCP port to use for connection with the device. |
| Login | login | The login name used to access the device. |
| Password | passwd | The password used to authenticate the connection to the device. |
| Password Script (optional) | passwd_script | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Use SSH | secure | Indicates that the system will use SSH to access the device. When using SSH, you must specify either a password, a password script, or an identity file. |
| SSH Options | ssh_options | SSH options to use. The default value is -1 -c blowfish. |
| Path to SSH Identity File | identity_file | The Identity file for SSH. |
| Force Command Prompt | cmd_prompt | The command prompt to use. The default value is 'MP>', 'hpiLO->'. |
| Power Wait (seconds) | power_wait | Number of seconds to wait after issuing a power off or power on command. |
| Delay (seconds) | delay | The number of seconds to wait before fencing is started. The default value is 0. |
| Power Timeout (seconds) | power_timeout | Number of seconds to continue testing for a status change after issuing a power off or power on command. The default value is 20. |
| Shell Timeout (seconds) | shell_timeout | Number of seconds to wait for a command prompt after issuing a command. The default value is 3. |
| Login Timeout (seconds) | login_timeout | Number of seconds to wait for a command prompt after login. The default value is 5. |
| Times to Retry Power On Operation | retry_on | Number of attempts to retry a power on operation. The default value is 1. |
Figure 4.13, “HP iLO MP” shows the configuration screen for adding an HP iLO MPfence device.
Figure 4.13. HP iLO MP
The following command creates a fence device instance for a HP iLO MP device:
ccs -f cluster.conf --addfencedev hpilomptest1 agent=fence_hpilo cmd_prompt=hpiLO-> ipaddr=192.168.0.1 \ login=root passwd=password123 power_wait=60
The following is the
cluster.conf entry for the fence_hpilo_mp device:
<fencedevices> <fencedevice agent="fence_ilo_mp" cmd_prompt="hpiLO->" ipaddr="192.168.0.1" login="root" name="hpilomptest1" passwd="password123" power_wait="60"/> </fencedevices>
