Red Hat Summit Red Hat SummitSupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

4.22. IF-MIB

Table 4.23, “IF MIB” lists the fence device parameters used by fence_ifmib, the fence agent for IF-MIB devices.
Expand
Table 4.23. IF MIB
luci Field cluster.conf Attribute Description
Name name A name for the IF MIB device connected to the cluster.
IP Address or Hostname ipaddr The IP address or host name assigned to the device.
UDP/TCP Port (optional) udpport The UDP/TCP port to use for connection with the device; the default value is 161.
Login login The login name used to access the device.
Password passwd The password used to authenticate the connection to the device.
Password Script (optional) passwd_script The script that supplies a password for access to the fence device. Using this supersedes the Password parameter.
SNMP Version snmp_version The SNMP version to use (1, 2c, 3); the default value is 1.
SNMP Community community The SNMP community string.
SNMP Security Level snmp_sec_level The SNMP security level (noAuthNoPriv, authNoPriv, authPriv).
SNMP Authentication Protocol snmp_auth_prot The SNMP authentication protocol (MD5, SHA).
SNMP Privacy Protocol snmp_priv_prot The SNMP privacy protocol (DES, AES).
SNMP Privacy Protocol Password snmp_priv_passwd The SNMP privacy protocol password.
SNMP Privacy Protocol Script snmp_priv_passwd_script The script that supplies a password for SNMP privacy protocol. Using this supersedes the SNMP privacy protocol password parameter.
Power Wait (seconds) power_wait Number of seconds to wait after issuing a power off or power on command.
Power Timeout (seconds) power_timeout Number of seconds to continue testing for a status change after issuing a power off or power on command. The default value is 20.
Shell Timeout (seconds) shell_timeout Number of seconds to wait for a command prompt after issuing a command. The default value is 3.
Login Timeout (seconds) login_timeout Number of seconds to wait for a command prompt after login. The default value is 5.
Times to Retry Power On Operation retry_on Number of attempts to retry a power on operation. The default value is 1.
Port (Outlet) Number port Physical plug number or name of virtual machine.
Delay (optional) delay The number of seconds to wait before fencing is started. The default value is 0.
Figure 4.17, “IF-MIB” shows the configuration screen for adding an IF-MIB fence device.
IF-MIB
View larger image
IF-MIB

Figure 4.17. IF-MIB

The following command creates a fence device instance for an IF-MIB device: 
ccs -f cluster.conf --addfencedev ifmib1 agent=fence_ifmib community=private ipaddr=192.168.0.1 login=root \
 passwd=password123 snmp_priv_passwd=snmpasswd123 power_wait=60 udpport=161
Copy to Clipboard Toggle word wrap
The following is the cluster.conf entry for the fence_ifmib device: 
 <fencedevices>
  <fencedevice agent="fence_ifmib" community="private" ipaddr="192.168.0.1" login="root" name="ifmib1" \
   passwd="password123" power_wait="60" snmp_priv_passwd="snmpasswd123" udpport="161"/>
 </fencedevices>
Copy to Clipboard Toggle word wrap
Retour au début
Red Hat logoGithubredditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance. Découvrez nos récentes mises à jour.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez le Blog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

Theme

© 2025 Red Hat