|
[DEFAULT] agent_heartbeat_expiry = 60
|
(IntOpt) Time (in seconds) after which a guest is considered unreachable
|
|
[DEFAULT] cinder_endpoint_type = publicURL
|
(StrOpt) Service endpoint type to use when searching catalog.
|
|
[DEFAULT] guest_info = guest_info.conf
|
(StrOpt) The guest info filename found in the injected config location. If a full path is specified then it will be used as the path to the guest info file
|
|
[DEFAULT] heat_endpoint_type = publicURL
|
(StrOpt) Service endpoint type to use when searching catalog.
|
|
[DEFAULT] injected_config_location = /etc/trove/conf.d
|
(StrOpt) Path to folder on the Guest where config files will be injected during instance creation.
|
|
[DEFAULT] neutron_endpoint_type = publicURL
|
(StrOpt) Service endpoint type to use when searching catalog.
|
|
[DEFAULT] nova_compute_endpoint_type = publicURL
|
(StrOpt) Service endpoint type to use when searching catalog.
|
|
[DEFAULT] swift_endpoint_type = publicURL
|
(StrOpt) Service endpoint type to use when searching catalog.
|
|
[DEFAULT] transport_url = None
|
(StrOpt) A URL representing the messaging driver to use and its full configuration. If not set, we fall back to the rpc_backend option and driver specific configuration.
|
|
[couchdb] backup_incremental_strategy = {}
|
(DictOpt) Incremental Backup Runner based on the default strategy. For strategies that do not implement an incremental, the runner will use the default full backup.
|
|
[couchdb] backup_namespace = None
|
(StrOpt) Namespace to load backup strategies from.
|
|
[couchdb] backup_strategy = None
|
(StrOpt) Default strategy to perform backups.
|
|
[couchdb] device_path = /dev/vdb
|
(StrOpt) Device path for volume if volume support is enabled.
|
|
[couchdb] mount_point = /var/lib/couchdb
|
(StrOpt) Filesystem path for mounting volumes if volume support is enabled.
|
|
[couchdb] replication_strategy = None
|
(StrOpt) Default strategy for replication.
|
|
[couchdb] restore_namespace = None
|
(StrOpt) Namespace to load restore strategies from.
|
|
[couchdb] root_on_create = False
|
(BoolOpt) Enable the automatic creation of the root user for the service during instance-create. The generated password for the root user is immediately returned in the response of instance-create as the "password" field.
|
|
[couchdb] tcp_ports = 5984
|
(ListOpt) List of TCP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[couchdb] udp_ports =
|
(ListOpt) List of UDP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[couchdb] volume_support = True
|
(BoolOpt) Whether to provision a Cinder volume for datadir.
|
|
[database] connection = sqlite:///trove_test.sqlite
|
(StrOpt) SQL Connection.
|
|
[database] idle_timeout = 3600
|
(IntOpt) None
|
|
[database] query_log = False
|
(BoolOpt) None
|
|
[db2] backup_incremental_strategy = {}
|
(DictOpt) Incremental Backup Runner based on the default strategy. For strategies that do not implement an incremental, the runner will use the default full backup.
|
|
[db2] backup_namespace = None
|
(StrOpt) Namespace to load backup strategies from.
|
|
[db2] backup_strategy = None
|
(StrOpt) Default strategy to perform backups.
|
|
[db2] device_path = /dev/vdb
|
(StrOpt) Device path for volume if volume support is enabled.
|
|
[db2] ignore_users = PUBLIC, DB2INST1
|
(ListOpt) None
|
|
[db2] mount_point = /home/db2inst1/db2inst1
|
(StrOpt) Filesystem path for mounting volumes if volume support is enabled.
|
|
[db2] replication_strategy = None
|
(StrOpt) Default strategy for replication.
|
|
[db2] restore_namespace = None
|
(StrOpt) Namespace to load restore strategies from.
|
|
[db2] root_on_create = False
|
(BoolOpt) Enable the automatic creation of the root user for the service during instance-create. The generated password for the root user is immediately returned in the response of instance-create as the 'password' field.
|
|
[db2] tcp_ports = 50000
|
(ListOpt) List of TCP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[db2] udp_ports =
|
(ListOpt) List of UDP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[db2] volume_support = True
|
(BoolOpt) Whether to provision a Cinder volume for datadir.
|
|
[oslo_messaging_amqp] allow_insecure_clients = False
|
(BoolOpt) Accept clients using either SSL or plain TCP
|
|
[oslo_messaging_amqp] broadcast_prefix = broadcast
|
(StrOpt) address prefix used when broadcasting to all servers
|
|
[oslo_messaging_amqp] container_name = None
|
(StrOpt) Name for the AMQP container
|
|
[oslo_messaging_amqp] group_request_prefix = unicast
|
(StrOpt) address prefix when sending to any server in group
|
|
[oslo_messaging_amqp] idle_timeout = 0
|
(IntOpt) Timeout for inactive connections (in seconds)
|
|
[oslo_messaging_amqp] server_request_prefix = exclusive
|
(StrOpt) address prefix used when sending to a specific server
|
|
[oslo_messaging_amqp] ssl_ca_file =
|
(StrOpt) CA certificate PEM file for verifing server certificate
|
|
[oslo_messaging_amqp] ssl_cert_file =
|
(StrOpt) Identifying certificate PEM file to present to clients
|
|
[oslo_messaging_amqp] ssl_key_file =
|
(StrOpt) Private key PEM file used to sign cert_file certificate
|
|
[oslo_messaging_amqp] ssl_key_password = None
|
(StrOpt) Password for decrypting ssl_key_file (if encrypted)
|
|
[oslo_messaging_amqp] trace = False
|
(BoolOpt) Debug: dump AMQP frames to stdout
|
|
[oslo_messaging_qpid] amqp_auto_delete = False
|
(BoolOpt) Auto-delete queues in AMQP.
|
|
[oslo_messaging_qpid] amqp_durable_queues = False
|
(BoolOpt) Use durable queues in AMQP.
|
|
[oslo_messaging_qpid] qpid_heartbeat = 60
|
(IntOpt) Seconds between connection keepalive heartbeats.
|
|
[oslo_messaging_qpid] qpid_hostname = localhost
|
(StrOpt) Qpid broker hostname.
|
|
[oslo_messaging_qpid] qpid_hosts = $qpid_hostname:$qpid_port
|
(ListOpt) Qpid HA cluster host:port pairs.
|
|
[oslo_messaging_qpid] qpid_password =
|
(StrOpt) Password for Qpid connection.
|
|
[oslo_messaging_qpid] qpid_port = 5672
|
(IntOpt) Qpid broker port.
|
|
[oslo_messaging_qpid] qpid_protocol = tcp
|
(StrOpt) Transport to use, either 'tcp' or 'ssl'.
|
|
[oslo_messaging_qpid] qpid_receiver_capacity = 1
|
(IntOpt) The number of prefetched messages held by receiver.
|
|
[oslo_messaging_qpid] qpid_sasl_mechanisms =
|
(StrOpt) Space separated list of SASL mechanisms to use for auth.
|
|
[oslo_messaging_qpid] qpid_tcp_nodelay = True
|
(BoolOpt) Whether to disable the Nagle algorithm.
|
|
[oslo_messaging_qpid] qpid_topology_version = 1
|
(IntOpt) The qpid topology version to use. Version 1 is what was originally used by impl_qpid. Version 2 includes some backwards-incompatible changes that allow broker federation to work. Users should update to version 2 when they are able to take everything down, as it requires a clean break.
|
|
[oslo_messaging_qpid] qpid_username =
|
(StrOpt) Username for Qpid connection.
|
|
[oslo_messaging_qpid] rpc_conn_pool_size = 30
|
(IntOpt) Size of RPC connection pool.
|
|
[oslo_messaging_rabbit] amqp_auto_delete = False
|
(BoolOpt) Auto-delete queues in AMQP.
|
|
[oslo_messaging_rabbit] amqp_durable_queues = False
|
(BoolOpt) Use durable queues in AMQP.
|
|
[oslo_messaging_rabbit] fake_rabbit = False
|
(BoolOpt) Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake
|
|
[oslo_messaging_rabbit] heartbeat_rate = 2
|
(IntOpt) How often times during the heartbeat_timeout_threshold we check the heartbeat.
|
|
[oslo_messaging_rabbit] heartbeat_timeout_threshold = 0
|
(IntOpt) Number of seconds after which the Rabbit broker is considered down if heartbeat's keep-alive fails (0 disables the heartbeat, >0 enables it. Enabling heartbeats requires kombu>=3.0.7 and amqp>=1.4.0). EXPERIMENTAL
|
|
[oslo_messaging_rabbit] kombu_reconnect_delay = 1.0
|
(FloatOpt) How long to wait before reconnecting in response to an AMQP consumer cancel notification.
|
|
[oslo_messaging_rabbit] kombu_ssl_ca_certs =
|
(StrOpt) SSL certification authority file (valid only if SSL enabled).
|
|
[oslo_messaging_rabbit] kombu_ssl_certfile =
|
(StrOpt) SSL cert file (valid only if SSL enabled).
|
|
[oslo_messaging_rabbit] kombu_ssl_keyfile =
|
(StrOpt) SSL key file (valid only if SSL enabled).
|
|
[oslo_messaging_rabbit] kombu_ssl_version =
|
(StrOpt) SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.
|
|
[oslo_messaging_rabbit] rabbit_ha_queues = False
|
(BoolOpt) Use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database.
|
|
[oslo_messaging_rabbit] rabbit_host = localhost
|
(StrOpt) The RabbitMQ broker address where a single node is used.
|
|
[oslo_messaging_rabbit] rabbit_hosts = $rabbit_host:$rabbit_port
|
(ListOpt) RabbitMQ HA cluster host:port pairs.
|
|
[oslo_messaging_rabbit] rabbit_login_method = AMQPLAIN
|
(StrOpt) The RabbitMQ login method.
|
|
[oslo_messaging_rabbit] rabbit_max_retries = 0
|
(IntOpt) Maximum number of RabbitMQ connection retries. Default is 0 (infinite retry count).
|
|
[oslo_messaging_rabbit] rabbit_password = guest
|
(StrOpt) The RabbitMQ password.
|
|
[oslo_messaging_rabbit] rabbit_port = 5672
|
(IntOpt) The RabbitMQ broker port where a single node is used.
|
|
[oslo_messaging_rabbit] rabbit_retry_backoff = 2
|
(IntOpt) How long to backoff for between retries when connecting to RabbitMQ.
|
|
[oslo_messaging_rabbit] rabbit_retry_interval = 1
|
(IntOpt) How frequently to retry connecting with RabbitMQ.
|
|
[oslo_messaging_rabbit] rabbit_use_ssl = False
|
(BoolOpt) Connect over SSL for RabbitMQ.
|
|
[oslo_messaging_rabbit] rabbit_userid = guest
|
(StrOpt) The RabbitMQ userid.
|
|
[oslo_messaging_rabbit] rabbit_virtual_host = /
|
(StrOpt) The RabbitMQ virtual host.
|
|
[oslo_messaging_rabbit] rpc_conn_pool_size = 30
|
(IntOpt) Size of RPC connection pool.
|
|
[profiler] enabled = False
|
(BoolOpt) If False fully disable profiling feature.
|
|
[profiler] trace_sqlalchemy = True
|
(BoolOpt) If False doesn't trace SQL requests.
|
|
[upgrade_levels] conductor = icehouse
|
(StrOpt) Set a version cap for messages sent to conductor services
|
|
[upgrade_levels] guestagent = icehouse
|
(StrOpt) Set a version cap for messages sent to guestagent services
|
|
[upgrade_levels] taskmanager = icehouse
|
(StrOpt) Set a version cap for messages sent to taskmanager services
|
|
[vertica] api_strategy = trove.common.strategies.cluster.experimental.vertica.api.VerticaAPIStrategy
|
(StrOpt) Class that implements datastore-specific API logic.
|
|
[vertica] backup_incremental_strategy = {}
|
(DictOpt) Incremental Backup Runner based on the default strategy. For strategies that do not implement an incremental, the runner will use the default full backup.
|
|
[vertica] backup_namespace = None
|
(StrOpt) Namespace to load backup strategies from.
|
|
[vertica] backup_strategy = None
|
(StrOpt) Default strategy to perform backups.
|
|
[vertica] cluster_member_count = 3
|
(IntOpt) Number of members in Vertica cluster.
|
|
[vertica] cluster_support = True
|
(BoolOpt) Enable clusters to be created and managed.
|
|
[vertica] device_path = /dev/vdb
|
(StrOpt) Device path for volume if volume support is enabled.
|
|
[vertica] guestagent_strategy = trove.common.strategies.cluster.experimental.vertica.guestagent.VerticaGuestAgentStrategy
|
(StrOpt) Class that implements datastore-specific Guest Agent API logic.
|
|
[vertica] mount_point = /var/lib/vertica
|
(StrOpt) Filesystem path for mounting volumes if volume support is enabled.
|
|
[vertica] readahead_size = 2048
|
(IntOpt) Size(MB) to be set as readahead_size for data volume
|
|
[vertica] replication_strategy = None
|
(StrOpt) Default strategy for replication.
|
|
[vertica] restore_namespace = None
|
(StrOpt) Namespace to load restore strategies from.
|
|
[vertica] taskmanager_strategy = trove.common.strategies.cluster.experimental.vertica.taskmanager.VerticaTaskManagerStrategy
|
(StrOpt) Class that implements datastore-specific task manager logic.
|
|
[vertica] tcp_ports = 5433, 5434, 22, 5444, 5450, 4803
|
(ListOpt) List of TCP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[vertica] udp_ports = 5433, 4803, 4804, 6453
|
(ListOpt) List of UDP ports and/or port ranges to open in the security group (only applicable if trove_security_groups_support is True).
|
|
[vertica] volume_support = True
|
(BoolOpt) Whether to provision a Cinder volume for datadir.
|
Red Hat Summit
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}