Chapter 10. Scaling Compute nodes with director Operator

Procedure

1. Check that you have enough hosts in a ready state in the openshift-machine-api namespace:

   $ oc get baremetalhosts -n openshift-machine-api

   For more information on managing your bare-metal hosts, see Managing bare metal hosts.

2. Increase the count parameter for the compute OpenStackBaremetalSet resource:

   $ oc patch openstackbaremetalset compute --type=merge --patch '{"spec":{"count":3}}' -n openstack

   The OpenStackBaremetalSet resource automatically provisions the new nodes with the Red Hat Enterprise Linux base operating system.

3. Wait until the provisioning process completes. Check the nodes periodically to determine the readiness of the nodes:

   $ oc get baremetalhosts -n openshift-machine-api
   $ oc get openstackbaremetalset

4. Optional: Reserve static IP addresses for networks on the new Compute nodes. For more information, see Reserving static IP addresses for added Compute nodes with the OpenStackNetConfig CRD.
5. Generate the Ansible playbooks by using OpenStackConfigGenerator and apply the overcloud configuration. For more information, see Configuring and deploying the overcloud with director Operator.

Procedure

1. Open the openstacknetconfig.yaml file for the overcloud on your workstation.

2. Add the following configuration to openstacknetconfig.yaml to create the OpenStackNetConfig custom resource (CR):

   apiVersion: osp-director.openstack.org/v1beta1
   kind: OpenStackNetConfig
   metadata:
     name: openstacknetconfig

3. Reserve static IP addresses for networks on specific nodes:

   spec:
     ...
     reservations:
       controller-0:
         ipReservations:
           ctlplane: 172.22.0.120
       compute-0:
         ipReservations:
           ctlplane: 172.22.0.140
           internal_api: 172.17.0.40
           storage: 172.18.0.40
           tenant: 172.20.0.40
       ...
       //The key for the ctlplane VIPs
       controlplane:
         ipReservations:
           ctlplane: 172.22.0.110
           external: 10.0.0.10
           internal_api: 172.17.0.10
           storage: 172.18.0.10
           storage_mgmt: 172.19.0.10
         macReservations: {}

   Note

   Reservations have precedence over any autogenerated IP addresses.

4. Save the openstacknetconfig.yaml definition file.

5. Create the overcloud network configuration:

   $ oc create -f osnetconfig.yaml -n openstack

Verification

1. To verify that the overcloud network configuration is created, view the resources for the overcloud network configuration:

   $ oc get openstacknetconfig/openstacknetconfig

2. View the OpenStackNetConfig API and child resources:

   $ oc get openstacknetconfig/openstacknetconfig -n openstack
   $ oc get openstacknetattachment -n openstack
   $ oc get openstacknet -n openstack

   If you see errors, check the underlying network-attach-definition and node network configuration policies:

   $ oc get network-attachment-definitions -n openstack
   $ oc get nncp

Procedure

1. Access the remote shell for openstackclient:

   $ oc rsh -n openstack openstackclient

2. Identify the Compute node that you want to remove:

   $ openstack compute service list

3. Disable the Compute service on the node to prevent the node from scheduling new instances:

   $ openstack compute service set <hostname> nova-compute --disable

4. Annotate the bare-metal node to prevent Metal³ from starting the node:

   $ oc annotate baremetalhost <node> baremetalhost.metal3.io/detached=true
   $ oc logs --since=1h <metal3-pod> metal3-baremetal-operator | grep -i detach
   $ oc get baremetalhost <node> -o json | jq .status.operationalStatus
   "detached"

   • Replace <node> with the name of the BareMetalHost resource.
   • Replace <metal3-pod> with the name of your metal3 pod.

5. Log in to the Compute node as the root user and shut down the bare-metal node:

   [root@compute-0 ~]# shutdown -h now

   If the Compute node is not accessible, complete the following steps:

   1. Log in to a Controller node as the root user.

   2. If Instance HA is enabled, disable the STONITH device for the Compute node:

      [root@controller-0 ~]# pcs stonith disable <stonith_resource_name>

      • Replace <stonith_resource_name> with the name of the STONITH resource that corresponds to the node. The resource name uses the format <resource_agent>-<host_mac>. You can find the resource agent and the host MAC address in the FencingConfig section of the fencing.yaml file.
   3. Use IPMI to power off the bare-metal node. For more information, see your hardware vendor documentation.

6. Retrieve the BareMetalHost resource that corresponds to the node that you want to remove:

   $ oc get openstackbaremetalset compute -o json | jq '.status.baremetalHosts | to_entries[] | "\(.key) => \(.value | .hostRef)"'
   "compute-0, openshift-worker-3"
   "compute-1, openshift-worker-4"

7. To change the status of the annotatedForDeletion parameter to true in the OpenStackBaremetalSet resource, annotate the BareMetalHost resource with osp-director.openstack.org/delete-host=true:

   $ oc annotate -n openshift-machine-api bmh/openshift-worker-3 osp-director.openstack.org/delete-host=true --overwrite

8. Optional: Confirm that the annotatedForDeletion status has changed to true in the OpenStackBaremetalSet resource:

   $ oc get openstackbaremetalset compute -o json -n openstack | jq .status
   {
     "baremetalHosts": {
       "compute-0": {
         "annotatedForDeletion": true,
         "ctlplaneIP": "192.168.25.105/24",
         "hostRef": "openshift-worker-3",
         "hostname": "compute-0",
         "networkDataSecretName": "compute-cloudinit-networkdata-openshift-worker-3",
         "provisioningState": "provisioned",
         "userDataSecretName": "compute-cloudinit-userdata-openshift-worker-3"
       },
       "compute-1": {
         "annotatedForDeletion": false,
         "ctlplaneIP": "192.168.25.106/24",
         "hostRef": "openshift-worker-4",
         "hostname": "compute-1",
         "networkDataSecretName": "compute-cloudinit-networkdata-openshift-worker-4",
         "provisioningState": "provisioned",
         "userDataSecretName": "compute-cloudinit-userdata-openshift-worker-4"
       }
     },
     "provisioningStatus": {
       "readyCount": 2,
       "reason": "All requested BaremetalHosts have been provisioned",
       "state": "provisioned"
     }
   }

9. Decrease the count parameter for the compute OpenStackBaremetalSet resource:

   $ oc patch openstackbaremetalset compute --type=merge --patch '{"spec":{"count":1}}' -n openstack

   When you reduce the resource count of the OpenStackBaremetalSet resource, you trigger the corresponding controller to handle the resource deletion, which causes the following actions:

   • Director Operator deletes the corresponding IP reservations from OpenStackIPSet and OpenStackNetConfig for the deleted node.

   • Director Operator flags the IP reservation entry in the OpenStackNet resource as deleted.

     $ oc get osnet ctlplane -o json -n openstack | jq .reservations
     {
       "compute-0": {
         "deleted": true,
         "ip": "172.22.0.140"
       },
       "compute-1": {
         "deleted": false,
         "ip": "172.22.0.100"
       },
       "controller-0": {
         "deleted": false,
         "ip": "172.22.0.120"
       },
       "controlplane": {
         "deleted": false,
         "ip": "172.22.0.110"
       },
       "openstackclient-0": {
         "deleted": false,
         "ip": "172.22.0.251"
       }

10. Optional: To make the IP reservations of the deleted OpenStackBaremetalSet resource available for other roles to use, set the value of the spec.preserveReservations parameter to false in the OpenStackNetConfig object.

11. Access the remote shell for openstackclient:

    $ oc rsh openstackclient -n openstack

12. Remove the Compute service entries from the overcloud:

    $ openstack compute service list
    $ openstack compute service delete <service-id>

13. Check the Compute network agents entries in the overcloud and remove them if they exist:

    $ openstack network agent list
    $ for AGENT in $(openstack network agent list --host <scaled-down-node> -c ID -f value) ; do openstack network agent delete $AGENT ; done

14. Exit from openstackclient:

    $ exit