Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 18. Backing up and restoring Red Hat Quay on a standalone deployment

Use the content within this section to back up and restore Red Hat Quay in standalone deployments.

18.1. Optional: Enabling read-only mode for Red Hat Quay
Copia collegamento

Enabling read-only mode for your Red Hat Quay deployment allows you to manage the registry’s operations. Red Hat Quay administrators can enable read-only mode to restrict write access to the registry, which helps ensure data integrity, mitigate risks during maintenance windows, and provide a safeguard against unintended modifications to registry data. It also helps to ensure that your Red Hat Quay registry remains online and available to serve images to users.

Note

In some cases, a read-only option for Red Hat Quay is not possible since it requires inserting a service key and other manual configuration changes. As an alternative to read-only mode, Red Hat Quay administrators might consider enabling the DISABLE_PUSHES feature. When this field is set to true, users are unable to push images or image tags to the registry when using the CLI. Enabling DISABLE_PUSHES differs from read-only mode because the database is not set as read-only when it is enabled.

This field might be useful in some situations such as when Red Hat Quay administrators want to calculate their registry’s quota and disable image pushing until after calculation has completed. With this method, administrators can avoid putting putting the whole registry in read-only mode, which affects the database, so that most operations can still be done.

For information about enabling this configuration field, see Miscellaneous configuration fields.

Prerequisites

  • If you are using Red Hat Enterprise Linux (RHEL) 7.x:

    • You have enabled the Red Hat Software Collections List (RHSCL).
    • You have installed Python 3.6.
    • You have downloaded the virtualenv package.
    • You have installed the git CLI.

  • If you are using Red Hat Enterprise Linux (RHEL) 8:

    • You have installed Python 3 on your machine.
    • You have downloaded the python3-virtualenv package.
    • You have installed the git CLI.
  • You have cloned the https://github.com/quay/quay.git repository.

18.1.1. Creating service keys for standalone Red Hat Quay
Copia collegamento

Red Hat Quay uses service keys to communicate with various components. These keys are used to sign completed requests, such as requesting to scan images, login, storage access, and so on.

Procedure

  1. If your Red Hat Quay registry is readily available, you can generate service keys inside of the Quay registry container.

    1. Enter the following command to generate a key pair inside of the Quay container: 

      $ podman exec quay python3 tools/generatekeypair.py quay-readonly
      Copy to Clipboard Toggle word wrap

  2. If your Red Hat Quay is not readily available, you must generate your service keys inside of a virtual environment.

    1. Change into the directory of your Red Hat Quay deployment and create a virtual environment inside of that directory: 

      $ cd <$QUAY>/quay && virtualenv -v venv
      Copy to Clipboard Toggle word wrap

    2. Activate the virtual environment by entering the following command: 

      $ source venv/bin/activate
      Copy to Clipboard Toggle word wrap

    3. Optional. Install the pip CLI tool if you do not have it installed: 

      $ venv/bin/pip install --upgrade pip
      Copy to Clipboard Toggle word wrap

    4. In your Red Hat Quay directory, create a requirements-generatekeys.txt file with the following content: 

      $ cat << EOF > requirements-generatekeys.txt
cryptography==3.4.7
pycparser==2.19
pycryptodome==3.9.4
pycryptodomex==3.9.4
pyjwkest==1.4.2
PyJWT==1.7.1
Authlib==1.0.0a2
EOF
      Copy to Clipboard Toggle word wrap

    5. Enter the following command to install the Python dependencies defined in the requirements-generatekeys.txt file: 

      $ venv/bin/pip install -r requirements-generatekeys.txt
      Copy to Clipboard Toggle word wrap

    6. Enter the following command to create the necessary service keys: 

      $ PYTHONPATH=. venv/bin/python /<path_to_cloned_repo>/tools/generatekeypair.py quay-readonly
      Copy to Clipboard Toggle word wrap

      Example output 

      Writing public key to quay-readonly.jwk
Writing key ID to quay-readonly.kid
Writing private key to quay-readonly.pem
      Copy to Clipboard Toggle word wrap

    7. Enter the following command to deactivate the virtual environment: 

      $ deactivate
      Copy to Clipboard Toggle word wrap

18.1.2. Adding keys to the PostgreSQL database
Copia collegamento

Use the following procedure to add your service keys to the PostgreSQL database.

Prerequistes

  • You have created the service keys.

Procedure

  1. Enter the following command to enter your Red Hat Quay database environment: 

    $ podman exec -it postgresql-quay psql -U postgres -d quay
    Copy to Clipboard Toggle word wrap

  2. Display the approval types and associated notes of the servicekeyapproval by entering the following command: 

    quay=# select * from servicekeyapproval;
    Copy to Clipboard Toggle word wrap

    Example output 

     id | approver_id |          approval_type           |       approved_date        | notes
----+-------------+----------------------------------+----------------------------+-------
  1 |             | ServiceKeyApprovalType.AUTOMATIC | 2024-05-07 03:47:48.181347 |
  2 |             | ServiceKeyApprovalType.AUTOMATIC | 2024-05-07 03:47:55.808087 |
  3 |             | ServiceKeyApprovalType.AUTOMATIC | 2024-05-07 03:49:04.27095  |
  4 |             | ServiceKeyApprovalType.AUTOMATIC | 2024-05-07 03:49:05.46235  |
  5 |           1 | ServiceKeyApprovalType.SUPERUSER | 2024-05-07 04:05:10.296796 |
...
    Copy to Clipboard Toggle word wrap

  3. Add the service key to your Red Hat Quay database by entering the following query: 

    quay=# INSERT INTO servicekey
  (name, service, metadata, kid, jwk, created_date, expiration_date)
  VALUES ('quay-readonly',
           'quay',
           '{}',
           '{<contents_of_.kid_file>}',
           '{<contents_of_.jwk_file>}',
           '{<created_date_of_read-only>}',
           '{<expiration_date_of_read-only>}');
    Copy to Clipboard Toggle word wrap

    Example output 

    INSERT 0 1
    Copy to Clipboard Toggle word wrap

  4. Next, add the key approval with the following query: 

    quay=# INSERT INTO servicekeyapproval ('approval_type', 'approved_date', 'notes')
  VALUES ("ServiceKeyApprovalType.SUPERUSER", "CURRENT_DATE",
           {include_notes_here_on_why_this_is_being_added});
    Copy to Clipboard Toggle word wrap

    Example output 

    INSERT 0 1
    Copy to Clipboard Toggle word wrap

  5. Set the approval_id field on the created service key row to the id field from the created service key approval. You can use the following SELECT statements to get the necessary IDs: 

    UPDATE servicekey
SET approval_id = (SELECT id FROM servicekeyapproval WHERE approval_type = 'ServiceKeyApprovalType.SUPERUSER')
WHERE name = 'quay-readonly';
    Copy to Clipboard Toggle word wrap 
    UPDATE 1
    Copy to Clipboard Toggle word wrap

18.1.3. Configuring read-only mode for standalone Red Hat Quay
Copia collegamento

After the service keys have been created and added to your PostgreSQL database, you must restart the Quay container on your standalone deployment.

Prerequisites

  • You have created the service keys and added them to your PostgreSQL database.

Procedure

  1. Shutdown all Red Hat Quay instances on all virtual machines. For example: 

    $ podman stop <quay_container_name_on_virtual_machine_a>
    Copy to Clipboard Toggle word wrap 
    $ podman stop <quay_container_name_on_virtual_machine_b>
    Copy to Clipboard Toggle word wrap

  2. Enter the following command to copy the contents of the quay-readonly.kid file and the quay-readonly.pem file to the directory that holds your Red Hat Quay configuration bundle: 

    $ cp quay-readonly.kid quay-readonly.pem $Quay/config
    Copy to Clipboard Toggle word wrap

  3. Enter the following command to set file permissions on all files in your configuration bundle folder: 

    $ setfacl -m user:1001:rw $Quay/config/*
    Copy to Clipboard Toggle word wrap

  4. Modify your Red Hat Quay config.yaml file and add the following information: 

    # ...
REGISTRY_STATE: readonly
INSTANCE_SERVICE_KEY_KID_LOCATION: 'conf/stack/quay-readonly.kid'
INSTANCE_SERVICE_KEY_LOCATION: 'conf/stack/quay-readonly.pem'
# ...
    Copy to Clipboard Toggle word wrap
  5. Distribute the new configuration bundle to all Red Hat Quay instances.

  6. Start Red Hat Quay by entering the following command: 

    $ podman run -d --rm -p 80:8080 -p 443:8443  \
   --name=quay-main-app \
   -v $QUAY/config:/conf/stack:Z \
   -v $QUAY/storage:/datastorage:Z \
   {productrepo}/{quayimage}:{productminv}
    Copy to Clipboard Toggle word wrap

  7. After starting Red Hat Quay, a banner inside in your instance informs users that Red Hat Quay is running in read-only mode. Pushes should be rejected and a 405 error should be logged. You can test this by running the following command: 

    $ podman push <quay-server.example.com>/quayadmin/busybox:test
    Copy to Clipboard Toggle word wrap

    Example output 

    613be09ab3c0: Preparing
denied: System is currently read-only. Pulls will succeed but all write operations are currently suspended.
    Copy to Clipboard Toggle word wrap

    With your Red Hat Quay deployment on read-only mode, you can safely manage your registry’s operations and perform such actions as backup and restore.

  8. Optional. After you are finished with read-only mode, you can return to normal operations by removing the following information from your config.yaml file. Then, restart your Red Hat Quay deployment: 

    # ...
REGISTRY_STATE: readonly
INSTANCE_SERVICE_KEY_KID_LOCATION: 'conf/stack/quay-readonly.kid'
INSTANCE_SERVICE_KEY_LOCATION: 'conf/stack/quay-readonly.pem'
# ...
    Copy to Clipboard Toggle word wrap 
    $ podman restart <container_id>
    Copy to Clipboard Toggle word wrap

18.1.4. Updating read-only expiration time
Copia collegamento

The Red Hat Quay read-only key has an expiration date, and when that date passes the key is deactivated. Before the key expires, its expiration time can be updated in the database. To update the key, connect your Red Hat Quay production database using the methods described earlier and issue the following query: 

quay=# UPDATE servicekey SET expiration_date = 'new-date' WHERE id = servicekey_id;
Copy to Clipboard Toggle word wrap

The list of service key IDs can be obtained by running the following query: 

SELECT id, name, expiration_date FROM servicekey;
Copy to Clipboard Toggle word wrap

18.2. Backing up Red Hat Quay on standalone deployments
Copia collegamento

This procedure describes how to create a backup of Red Hat Quay on standalone deployments.

Procedure

  1. Create a temporary backup directory, for example, quay-backup: 

    $ mkdir /tmp/quay-backup
    Copy to Clipboard Toggle word wrap

  2. The following example command denotes the local directory that the Red Hat Quay was started in, for example, /opt/quay-install: 

    $ podman run --name quay-app \
   -v /opt/quay-install/config:/conf/stack:Z \
   -v /opt/quay-install/storage:/datastorage:Z \
   registry.redhat.io/quay/quay-rhel8:v3.13.7
    Copy to Clipboard Toggle word wrap

    Change into the directory that bind-mounts to /conf/stack inside of the container, for example, /opt/quay-install, by running the following command: 

    $ cd /opt/quay-install
    Copy to Clipboard Toggle word wrap

  3. Compress the contents of your Red Hat Quay deployment into an archive in the quay-backup directory by entering the following command: 

    $ tar cvf /tmp/quay-backup/quay-backup.tar.gz *
    Copy to Clipboard Toggle word wrap

    Example output: 

    config.yaml
config.yaml.bak
extra_ca_certs/
extra_ca_certs/ca.crt
ssl.cert
ssl.key
    Copy to Clipboard Toggle word wrap

  4. Back up the Quay container service by entering the following command: 

    $ podman inspect quay-app | jq -r '.[0].Config.CreateCommand | .[]' | paste -s -d ' ' -

  /usr/bin/podman run --name quay-app \
  -v /opt/quay-install/config:/conf/stack:Z \
  -v /opt/quay-install/storage:/datastorage:Z \
  registry.redhat.io/quay/quay-rhel8:v3.13.7
    Copy to Clipboard Toggle word wrap

  5. Redirect the contents of your conf/stack/config.yaml file to your temporary quay-config.yaml file by entering the following command: 

    $ podman exec -it quay cat /conf/stack/config.yaml > /tmp/quay-backup/quay-config.yaml
    Copy to Clipboard Toggle word wrap

  6. Obtain the DB_URI located in your temporary quay-config.yaml by entering the following command: 

    $ grep DB_URI /tmp/quay-backup/quay-config.yaml
    Copy to Clipboard Toggle word wrap

    Example output: 

    $ postgresql://<username>:test123@172.24.10.50/quay
    Copy to Clipboard Toggle word wrap

  7. Extract the PostgreSQL contents to your temporary backup directory in a backup .sql file by entering the following command: 

    $ pg_dump -h 172.24.10.50  -p 5432 -d quay  -U  <username>   -W -O > /tmp/quay-backup/quay-backup.sql
    Copy to Clipboard Toggle word wrap

  8. Print the contents of your DISTRIBUTED_STORAGE_CONFIG by entering the following command: 

    DISTRIBUTED_STORAGE_CONFIG:
   default:
    - S3Storage
    - s3_bucket: <bucket_name>
      storage_path: /registry
      s3_access_key: <s3_access_key>
      s3_secret_key: <s3_secret_key>
      host: <host_name>
      s3_region: <region>
    Copy to Clipboard Toggle word wrap

  9. Export the AWS_ACCESS_KEY_ID by using the access_key credential obtained in Step 7: 

    $ export AWS_ACCESS_KEY_ID=<access_key>
    Copy to Clipboard Toggle word wrap

  10. Export the AWS_SECRET_ACCESS_KEY by using the secret_key obtained in Step 7: 

    $ export AWS_SECRET_ACCESS_KEY=<secret_key>
    Copy to Clipboard Toggle word wrap

  11. Sync the quay bucket to the /tmp/quay-backup/blob-backup/ directory from the hostname of your DISTRIBUTED_STORAGE_CONFIG: 

    $ aws s3 sync s3://<bucket_name>  /tmp/quay-backup/blob-backup/ --source-region us-east-2
    Copy to Clipboard Toggle word wrap

    Example output: 

    download: s3://<user_name>/registry/sha256/9c/9c3181779a868e09698b567a3c42f3744584ddb1398efe2c4ba569a99b823f7a to registry/sha256/9c/9c3181779a868e09698b567a3c42f3744584ddb1398efe2c4ba569a99b823f7a
download: s3://<user_name>/registry/sha256/e9/e9c5463f15f0fd62df3898b36ace8d15386a6813ffb470f332698ecb34af5b0d to registry/sha256/e9/e9c5463f15f0fd62df3898b36ace8d15386a6813ffb470f332698ecb34af5b0d
    Copy to Clipboard Toggle word wrap

It is recommended that you delete the quay-config.yaml file after syncing the quay bucket because it contains sensitive information. The quay-config.yaml file will not be lost because it is backed up in the quay-backup.tar.gz file.

18.3. Restoring Red Hat Quay on standalone deployments
Copia collegamento

This procedure describes how to restore Red Hat Quay on standalone deployments.

Prerequisites

  • You have backed up your Red Hat Quay deployment.

Procedure

  1. Create a new directory that will bind-mount to /conf/stack inside of the Red Hat Quay container: 

    $ mkdir /opt/new-quay-install
    Copy to Clipboard Toggle word wrap

  2. Copy the contents of your temporary backup directory created in Backing up Red Hat Quay on standalone deployments to the new-quay-install1 directory created in Step 1: 

    $ cp /tmp/quay-backup/quay-backup.tar.gz /opt/new-quay-install/
    Copy to Clipboard Toggle word wrap

  3. Change into the new-quay-install directory by entering the following command: 

    $ cd /opt/new-quay-install/
    Copy to Clipboard Toggle word wrap

  4. Extract the contents of your Red Hat Quay directory: 

    $ tar xvf /tmp/quay-backup/quay-backup.tar.gz *
    Copy to Clipboard Toggle word wrap

    Example output: 

    config.yaml
config.yaml.bak
extra_ca_certs/
extra_ca_certs/ca.crt
ssl.cert
ssl.key
    Copy to Clipboard Toggle word wrap

  5. Recall the DB_URI from your backed-up config.yaml file by entering the following command: 

    $ grep DB_URI config.yaml
    Copy to Clipboard Toggle word wrap

    Example output: 

    postgresql://<username>:test123@172.24.10.50/quay
    Copy to Clipboard Toggle word wrap

  6. Run the following command to enter the PostgreSQL database server: 

    $ sudo postgres
    Copy to Clipboard Toggle word wrap

  7. Enter psql and create a new database in 172.24.10.50 to restore the quay databases, for example, example_restore_registry_quay_database, by entering the following command: 

    $ psql "host=172.24.10.50  port=5432 dbname=postgres user=<username>  password=test123"
postgres=> CREATE DATABASE example_restore_registry_quay_database;
    Copy to Clipboard Toggle word wrap

    Example output: 

    CREATE DATABASE
    Copy to Clipboard Toggle word wrap

  8. Connect to the database by running the following command: 

    postgres=# \c "example-restore-registry-quay-database";
    Copy to Clipboard Toggle word wrap

    Example output: 

    You are now connected to database "example-restore-registry-quay-database" as user "postgres".
    Copy to Clipboard Toggle word wrap

  9. Create a pg_trmg extension of your Quay database by running the following command: 

    example_restore_registry_quay_database=> CREATE EXTENSION IF NOT EXISTS pg_trgm;
    Copy to Clipboard Toggle word wrap

    Example output: 

    CREATE EXTENSION
    Copy to Clipboard Toggle word wrap

  10. Exit the postgres CLI by entering the following command: 

    \q
    Copy to Clipboard Toggle word wrap

  11. Import the database backup to your new database by running the following command: 

    $ psql "host=172.24.10.50 port=5432 dbname=example_restore_registry_quay_database user=<username> password=test123"  -W <  /tmp/quay-backup/quay-backup.sql
    Copy to Clipboard Toggle word wrap

    Example output: 

    SET
SET
SET
SET
SET
    Copy to Clipboard Toggle word wrap

    Update the value of DB_URI in your config.yaml from postgresql://<username>:test123@172.24.10.50/quay to postgresql://<username>:test123@172.24.10.50/example-restore-registry-quay-database before restarting the Red Hat Quay deployment.

    Note

    The DB_URI format is DB_URI postgresql://<login_user_name>:<login_user_password>@<postgresql_host>/<quay_database>. If you are moving from one PostgreSQL server to another PostgreSQL server, update the value of <login_user_name>, <login_user_password> and <postgresql_host> at the same time.

  12. In the /opt/new-quay-install directory, print the contents of your DISTRIBUTED_STORAGE_CONFIG bundle: 

    $ cat config.yaml | grep DISTRIBUTED_STORAGE_CONFIG -A10
    Copy to Clipboard Toggle word wrap

    Example output: 

    DISTRIBUTED_STORAGE_CONFIG:
   default:
DISTRIBUTED_STORAGE_CONFIG:
   default:
    - S3Storage
    - s3_bucket: <bucket_name>
      storage_path: /registry
      s3_access_key: <s3_access_key>
      s3_region: <region>
      s3_secret_key: <s3_secret_key>
      host: <host_name>
    Copy to Clipboard Toggle word wrap
    Note

    Your DISTRIBUTED_STORAGE_CONFIG in /opt/new-quay-install must be updated before restarting your Red Hat Quay deployment.

  13. Export the AWS_ACCESS_KEY_ID by using the access_key credential obtained in Step 13: 

    $ export AWS_ACCESS_KEY_ID=<access_key>
    Copy to Clipboard Toggle word wrap

  14. Export the AWS_SECRET_ACCESS_KEY by using the secret_key obtained in Step 13: 

    $ export AWS_SECRET_ACCESS_KEY=<secret_key>
    Copy to Clipboard Toggle word wrap

  15. Create a new s3 bucket by entering the following command: 

    $ aws s3 mb s3://<new_bucket_name>  --region us-east-2
    Copy to Clipboard Toggle word wrap

    Example output: 

    $ make_bucket: quay
    Copy to Clipboard Toggle word wrap

  16. Upload all blobs to the new s3 bucket by entering the following command: 

    $ aws s3 sync --no-verify-ssl \
--endpoint-url <example_endpoint_url>
    1 
    
/tmp/quay-backup/blob-backup/. s3://quay/
    Copy to Clipboard Toggle word wrap
    1
    The Red Hat Quay registry endpoint must be the same before backup and after restore.

    Example output: 

    upload: ../../tmp/quay-backup/blob-backup/datastorage/registry/sha256/50/505edb46ea5d32b5cbe275eb766d960842a52ee77ac225e4dc8abb12f409a30d to s3://quay/datastorage/registry/sha256/50/505edb46ea5d32b5cbe275eb766d960842a52ee77ac225e4dc8abb12f409a30d
upload: ../../tmp/quay-backup/blob-backup/datastorage/registry/sha256/27/27930dc06c2ee27ac6f543ba0e93640dd21eea458eac47355e8e5989dea087d0 to s3://quay/datastorage/registry/sha256/27/27930dc06c2ee27ac6f543ba0e93640dd21eea458eac47355e8e5989dea087d0
upload: ../../tmp/quay-backup/blob-backup/datastorage/registry/sha256/8c/8c7daf5e20eee45ffe4b36761c4bb6729fb3ee60d4f588f712989939323110ec to s3://quay/datastorage/registry/sha256/8c/8c7daf5e20eee45ffe4b36761c4bb6729fb3ee60d4f588f712989939323110ec
...
    Copy to Clipboard Toggle word wrap

  17. Before restarting your Red Hat Quay deployment, update the storage settings in your config.yaml: 

    DISTRIBUTED_STORAGE_CONFIG:
   default:
DISTRIBUTED_STORAGE_CONFIG:
   default:
    - S3Storage
    - s3_bucket: <new_bucket_name>
      storage_path: /registry
      s3_access_key: <s3_access_key>
      s3_secret_key: <s3_secret_key>
      s3_region: <region>
      host: <host_name>
    Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat