Chapter 4. Setting up the Environment

This chapter outlines the details for setting up the environment for Red Hat Gluster Storage Container Converged in OpenShift.

4.1. Preparing the Red Hat OpenShift Container Platform Cluster

Execute the following steps to prepare the Red Hat OpenShift Container Platform cluster:

On the master or client, execute the following command to login as the cluster admin user:

# oc login

For example:

 oc login
Authentication required for https://dhcp46-24.lab.eng.blr.redhat.com:8443 (openshift)
Username: test
Password:
Login successful.

You have access to the following projects and can switch between them with 'oc project <project_name>':

    default
    kube-system
    logging
    management-infra
    openshift
    openshift-infra
  * storage-project

Using project "storage-project".

On the master or client, execute the following command to create a project, which will contain all the containerized Red Hat Gluster Storage services:
```
# oc new-project <project_name>
```
For example:
```
# oc new-project storage-project

Now using project "storage-project" on server "https://master.example.com:8443"
```
After the project is created, execute the following command on the master node to enable the deployment of the privileged containers as Red Hat Gluster Storage container can only run in the privileged mode.
```
# oadm policy add-scc-to-user privileged -z storage-project
```
Execute the following steps on the master to set up the router:
Note
If a router already exists, proceed to Step 5.
1. Execute the following command to enable the deployment of the router:
```
# oadm policy add-scc-to-user privileged -z router
# oadm policy add-scc-to-user privileged -z default
```
2. Execute the following command to deploy the router:
```
# oadm router storage-project-router --replicas=1
```
3. Edit the subdomain name in the config.yaml file located at /etc/origin/master/master-config.yaml.
  For example:
```
subdomain: "cloudapps.mystorage.com"
```
4. Restart the master OpenShift services by executing the following command:
```
# systemctl restart atomic-openshift-master
```
  Note
  If the router setup fails, use the port forward method as described in Appendix C, Client Configuration using Port Forwarding .
For more information regarding router setup, see https://access.redhat.com/documentation/en/openshift-container-platform/3.5/paged/installation-and-configuration/chapter-4-setting-up-a-router

Execute the following command to verify if the router is running:

# oc get dc <router_name>

For example:

# oc get dc storage-project-router
NAME                   REVISION   DESIRED   CURRENT   TRIGGERED BY
storage-project-router   1          1         1         config

Note

Ensure you do not edit the /etc/dnsmasq.conf file until the router has started.

After the router is running, the client has to be setup to access the services in the OpenShift cluster. Execute the following steps on the client to set up the DNS.
1. Edit the /etc/dnsmasq.conf file and add the following line to the file:
```
address=/.cloudapps.mystorage.com/<Router_IP_Address>
```
  where, Router_IP_Address is the IP address of the node where the router is running.
2. Restart the dnsmasq service by executing the following command:
```
# systemctl restart dnsmasq
```
3. Edit /etc/resolv.conf and add the following line:
```
nameserver 127.0.0.1
```
For more information regarding setting up the DNS, see https://access.redhat.com/documentation/en/openshift-container-platform/3.5/single/installation-and-configuration/#envirornment-requirements.

トップに戻る

このコンテンツは選択した言語では利用できません。

Chapter 4. Setting up the Environment

4.1. Preparing the Red Hat OpenShift Container Platform Cluster

詳細情報

試用、購入および販売

コミュニティー

Red Hat ドキュメントについて

多様性を受け入れるオープンソースの強化

会社概要

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links