このコンテンツは選択した言語では利用できません。

Chapter 5. The ConfigurationBuilder API


The ConfigurationBuilder API is a programmatic configuration API in Red Hat JBoss Data Grid.
The ConfigurationBuilder API is designed to assist with:
  • Chain coding of configuration options in order to make the coding process more efficient
  • Improve the readability of the configuration
In JBoss Data Grid, the ConfigurationBuilder API is also used to enable CacheLoaders and configure both global and cache level operations.

5.1. Using the ConfigurationBuilder API

5.1.1. Programmatically Create a CacheManager and Replicated Cache

Programmatic configuration in Red Hat JBoss Data Grid almost exclusively involves the ConfigurationBuilder API and the CacheManager. The following is an example of a programmatic CacheManager configuration:

Procedure 5.1. Configure the CacheManager Programmatically

EmbeddedCacheManager manager = new DefaultCacheManager("my-config-file.xml");
Cache defaultCache = manager.getCache();
Configuration c = new ConfigurationBuilder().clustering().cacheMode(CacheMode.REPL_SYNC)
.build();

String newCacheName = "repl";
manager.defineConfiguration(newCacheName, c);
Cache<String, String> cache = manager.getCache(newCacheName);
  1. Create a CacheManager as a starting point in an XML file. If required, this CacheManager can be programmed in runtime to the specification that meets the requirements of the use case.
  2. Create a new synchronously replicated cache programmatically.
    1. Create a new configuration object instance using the ConfigurationBuilder helper object:
      In the first line of the configuration, a new cache configuration object (named c) is created using the ConfigurationBuilder. Configuration c is assigned the default values for all cache configuration options except the cache mode, which is overridden and set to synchronous replication (REPL_SYNC).
    2. Define or register the configuration with a manager:
      In the third line of the configuration, the cache manager is used to define a named cache configuration for itself. This named cache configuration is called repl and its configuration is based on the configuration provided for cache configuration c in the first line.
    3. In the fourth line of the configuration, the cache manager is used to obtain a reference to the unique instance of the repl that is held by the cache manager. This cache instance is now ready to be used to perform operations to store and retrieve data.

Note

Programmatic configurations can only be used with JBoss Data Grid's Library mode.

5.1.2. Create a Customized Cache Using the Default Named Cache

The default cache configuration (or any customized configuration) can serve as a starting point to create a new cache.
As an example, if the infinispan-config-file.xml specifies the configuration for a replicated cache as a default and a distributed cache with a customized lifespan value is required. The required distributed cache must retain all aspects of the default cache specified in the infinispan-config-file.xml file except the mentioned aspects.

Procedure 5.2. Customize the Default Cache

EmbeddedCacheManager manager = new DefaultCacheManager("infinispan-config-file.xml");
Configuration dcc = cacheManager.getDefaultCacheConfiguration();
Configuration c = new ConfigurationBuilder().read(dcc).clustering()
	.cacheMode(CacheMode.DIST_SYNC).l1().lifespan(60000L).enable()
	.build();
manager.defineConfiguration(newCacheName, c);
Cache<String, String> cache = manager.getCache(newCacheName);
  1. Read an instance of a default Configuration object to get the default configuration:
  2. Use the ConfigurationBuilder to construct and modify the cache mode and L1 cache lifespan on a new configuration object:
  3. Register/define your cache configuration with a cache manager, where cacheName is name of cache specified in infinispan-config-file.xml:
  4. Get default cache with custom configuration changes.

5.1.3. Create a Customized Cache Using a Non-Default Named Cache

A situation can arise where a new customized cache must be created using a named cache that is not the default. The steps to accomplish this are similar to those used when using the default named cache for this purpose.
The difference in approach is due to taking a named cache called replicatedCache as the base instead of the default cache.

Procedure 5.3. Creating a Customized Cache Using a Non-Default Named Cache

EmbeddedCacheManager manager = new DefaultCacheManager("infinispan-config-file.xml");
Configuration rc = cacheManager.getCacheConfiguration("replicatedCache");
Configuration c = new ConfigurationBuilder().read(rc).clustering()
	.cacheMode(CacheMode.DIST_SYNC).l1().lifespan(60000L).enable()
	.build();
manager.defineConfiguration(newCacheName, c);
Cache<String, String> cache = manager.getCache(newCacheName);
  1. Read the replicatedCache to get the default configuration.
  2. Use the ConfigurationBuilder to construct and modify the desired configuration on a new configuration object.
  3. Register/define your cache configuration with a cache manager where newCacheName is the name of cache specified in infinispan-config-file.xml
  4. Get a newCacheName cache with custom configuration changes.

5.1.4. Using the Configuration Builder to Create Caches Programmatically

As an alternative to using an xml file with default cache values to create a new cache, use the ConfigurationBuilder API to create a new cache without any XML files. The ConfigurationBuilder API is intended to provide ease of use when creating chained code for configuration options.
The following new configuration is valid for global and cache level configuration. GlobalConfiguration objects are constructed using GlobalConfigurationBuilder while Configuration objects are built using ConfigurationBuilder.

5.1.5. Global Configuration Examples

5.1.5.1. Globally Configure the Transport Layer

A commonly used configuration option is to configure the transport layer. This informs Red Hat JBoss Data Grid how a node will discover other nodes:

Example 5.1. Configuring the Transport Layer

GlobalConfiguration globalConfig = new GlobalConfigurationBuilder()
  .globalJmxStatistics().enable()
  .build();

5.1.5.2. Globally Configure the Cache Manager Name

The following sample configuration allows you to use options from the global JMX statistics level to configure the name for a cache manager. This name distinguishes a particular cache manager from other cache managers on the same system.

Example 5.2. Configuring the Cache Manager Name

GlobalConfiguration globalConfig = new GlobalConfigurationBuilder()
  .globalJmxStatistics()
    .cacheManagerName("SalesCacheManager")
    .mBeanServerLookup(new JBossMBeanServerLookup())
    .enable()
  .build();

5.1.5.3. Globally Customize Thread Pool Executors

Some Red Hat JBoss Data Grid features are powered by a group of thread pool executors. These executors can be customized at the global level as follows:

Example 5.3. Customize Thread Pool Executors

GlobalConfiguration globalConfig = new GlobalConfigurationBuilder()
  .replicationQueueScheduledExecutor()
    .factory(new DefaultScheduledExecutorFactory())
    .addProperty("threadNamePrefix", "RQThread")
  .build();

5.1.6. Cache Level Configuration Examples

5.1.6.1. Cache Level Configuration for the Cluster Mode

The following configuration allows the use of options such as the cluster mode for the cache at the cache level rather than globally:

Example 5.4. Configure Cluster Mode at Cache Level

Configuration config = new ConfigurationBuilder()
  .clustering()
    .cacheMode(CacheMode.DIST_SYNC)
    .sync()
    .l1().lifespan(25000L).enable()
    .hash().numOwners(3)
  .build();

5.1.6.2. Cache Level Eviction and Expiration Configuration

Use the following configuration to configure expiration or eviction options for a cache at the cache level:

Example 5.5. Configuring Expiration and Eviction at the Cache Level

Configuration config = new ConfigurationBuilder()
           .eviction()
             .maxEntries(20000).strategy(EvictionStrategy.LIRS).expiration()
             .wakeUpInterval(5000L)
             .maxIdle(120000L)
           .build();

5.1.6.3. Cache Level Configuration for JTA Transactions

To interact with a cache for JTA transaction configuration, configure the transaction layer and optionally customize the locking settings. For transactional caches, it is recommended to enable transaction recovery to deal with unfinished transactions. Additionally, it is recommended that JMX management and statistics gathering is also enabled.

Example 5.6. Configuring JTA Transactions at Cache Level

Configuration config = new ConfigurationBuilder()
  .locking()
    .concurrencyLevel(10000).isolationLevel(IsolationLevel.REPEATABLE_READ)
    .lockAcquisitionTimeout(12000L).useLockStriping(false).writeSkewCheck(true)
  .transaction()
    .transactionManagerLookup(new GenericTransactionManagerLookup())
  .recovery().enable()
  .jmxStatistics().enable()
  .build();

5.1.6.4. Cache Level Configuration Using Chained Persistent Stores

The following configuration can be used to configure one or more chained persistent stores at the cache level:

Example 5.7. Configuring Chained Persistent Stores at Cache Level

Configuration conf = new ConfigurationBuilder()
          .persistence()
            .passivation(false)
            .addSingleFileStore()
               .location("/tmp/firstDir")
          .persistence()
            .passivation(false)
            .addSingleFileStore()
               .location("/tmp/secondDir")
          .build();

5.1.6.5. Cache Level Configuration for Advanced Externalizers

An advanced option such as a cache level configuration for advanced externalizers can also be configured programmatically as follows:

Example 5.8. Configuring Advanced Externalizers at Cache Level

GlobalConfiguration globalConfig = new GlobalConfigurationBuilder()
  .serialization()
    .addAdvancedExternalizer(new PersonExternalizer())
    .addAdvancedExternalizer(999, new AddressExternalizer())
  .build();
Red Hat logoGithubRedditYoutube

Red Hat ドキュメントについて

Red Hat をお使いのお客様が、信頼できるコンテンツが含まれている製品やサービスを活用することで、イノベーションを行い、目標を達成できるようにします。

多様性を受け入れるオープンソースの強化

Red Hat では、コード、ドキュメント、Web プロパティーにおける配慮に欠ける用語の置き換えに取り組んでいます。このような変更は、段階的に実施される予定です。詳細情報: Red Hat ブログ.

会社概要

Red Hat は、企業がコアとなるデータセンターからネットワークエッジに至るまで、各種プラットフォームや環境全体で作業を簡素化できるように、強化されたソリューションを提供しています。

© 2024 Red Hat, Inc.