このコンテンツは選択した言語では利用できません。
41.3. Handling Messages in a Logical Handler
Overview
Normal message processing is handled by the
handleMessage() method.
The
handleMessage() method receives a LogicalMessageContext object that provides access to the message body and any properties stored in the message context.
The
handleMessage() method returns either true or false depending on how message processing is to continue. It can also throw an exception.
Getting the message data
The
LogicalMessageContext object passed into logical message handlers allows access to the message body using the context's getMessage() method. The getMessage() method, shown in Example 41.2, “Method for Getting the Message Payload in a Logical Handler”, returns the message payload as a LogicalMessage object.
Example 41.2. Method for Getting the Message Payload in a Logical Handler
LogicalMessage getMessage();
Once you have the
LogicalMessage object, you can use it to manipulate the message body. The LogicalMessage interface, shown in Example 41.3, “Logical Message Holder”, has getters and setters for working with the actual message body.
Example 41.3. Logical Message Holder
LogicalMessage {Source getPayload();Object getPayload(JAXBContext context);void setPayload(Object payload,
JAXBContext context);void setPayload(Source payload);
}
Important
The contents of the message payload are determined by the type of binding in use. The SOAP binding only allows access to the SOAP body of the message. The XML binding allows access to the entire message body.
Working with the message body as an XML object
One pair of getters and setters of the logical message work with the message payload as a
javax.xml.transform.dom.DOMSource object.
The
getPayload() method that has no parameters returns the message payload as a DOMSource object. The returned object is the actual message payload. Any changes made to the returned object change the message body immediately.
You can replace the body of the message with a
DOMSource object using the setPayload() method that takes the single Source object.
Working with the message body as a JAXB object
The other pair of getters and setters allow you to work with the message payload as a JAXB object. They use a
JAXBContext object to transform the message payload into JAXB objects.
To use the JAXB objects you do the following:
- Get a
JAXBContextobject that can manage the data types in the message body.For information on creating aJAXBContextobject see Chapter 37, Using AJAXBContextObject. - Get the message body as shown in Example 41.4.
Example 41.4. Getting the Message Body as a JAXB Object
JAXBContext jaxbc = JAXBContext(myObjectFactory.class); Object body = message.getPayload(jaxbc); - Cast the returned object to the proper type.
- Manipulate the message body as needed.
- Put the updated message body back into the context as shown in Example 41.5.
Example 41.5. Updating the Message Body Using a JAXB Object
message.setPayload(body, jaxbc);
Working with context properties
The logical message context passed into a logical handler is an instance of the application's message context and can access all of the properties stored in it. Handlers have access to properties at both the
APPLICATION scope and the HANDLER scope.
Like the application's message context, the logical message context is a subclass of Java
Map. To access the properties stored in the context, you use the get() method and put() method inherited from the Map interface.
By default, any properties you set in the message context from inside a logical handler are assigned a scope of
HANDLER. If you want the application code to be able to access the property you need to use the context's setScope() method to explicitly set the property's scope to APPLICATION.
For more information on working with properties in the message context see Section 40.1, “Understanding Contexts”.
Determining the direction of the message
It is often important to know the direction a message is passing through the handler chain. For example, you would want to retrieve a security token from incoming requests and attach a security token to an outgoing response.
The direction of the message is stored in the message context's outbound message property. You retrieve the outbound message property from the message context using the
MessageContext.MESSAGE_OUTBOUND_PROPERTY key as shown in Example 41.6, “Getting the Message's Direction from the SOAP Message Context”.
Example 41.6. Getting the Message's Direction from the SOAP Message Context
Boolean outbound; outbound = (Boolean)smc.get(MessageContext.MESSAGE_OUTBOUND_PROPERTY);
The property is stored as a
Boolean object. You can use the object's booleanValue() method to determine the property's value. If the property is set to true, the message is outbound. If the property is set to false the message is inbound.
Determining the return value
How the
handleMessage() method completes its message processing has a direct impact on how message processing proceeds. It can complete by doing one of the following actions:
- Return
true—Returningtruesignals to the Apache CXF runtime that message processing should continue normally. The next handler, if any, has itshandleMessage()invoked. - Return
false—Returningfalsesignals to the Apache CXF runtime that normal message processing must stop. How the runtime proceeds depends on the message exchange pattern in use for the current message.For request-response message exchanges the following happens:- The direction of message processing is reversed.For example, if a request is being processed by a service provider, the message stops progressing toward the service's implementation object. Instead, it is sent back towards the binding for return to the consumer that originated the request.
- Any message handlers that reside along the handler chain in the new processing direction have their
handleMessage()method invoked in the order in which they reside in the chain. - When the message reaches the end of the handler chain it is dispatched.
For one-way message exchanges the following happens:- Message processing stops.
- All previously invoked message handlers have their
close()method invoked. - The message is dispatched.
- Throw a
ProtocolExceptionexception—Throwing aProtocolExceptionexception, or a subclass of this exception, signals the Apache CXF runtime that fault message processing is beginning. How the runtime proceeds depends on the message exchange pattern in use for the current message.For request-response message exchanges the following happens:- If the handler has not already created a fault message, the runtime wraps the message in a fault message.
- The direction of message processing is reversed.For example, if a request is being processed by a service provider, the message stops progressing toward the service's implementation object. Instead, it is sent back towards the binding for return to the consumer that originated the request.
- Any message handlers that reside along the handler chain in the new processing direction have their
handleFault()method invoked in the order in which they reside in the chain. - When the fault message reaches the end of the handler chain it is dispatched.
For one-way message exchanges the following happens:- If the handler has not already created a fault message, the runtime wraps the message in a fault message.
- Message processing stops.
- All previously invoked message handlers have their
close()method invoked. - The fault message is dispatched.
- Throw any other runtime exception—Throwing a runtime exception other than a
ProtocolExceptionexception signals the Apache CXF runtime that message processing is to stop. All previously invoked message handlers have theclose()method invoked and the exception is dispatched. If the message is part of a request-response message exchange, the exception is dispatched so that it is returned to the consumer that originated the request.
Example
Example 41.7, “Logical Message Handler Message Processing” shows an implementation of
handleMessage() message for a logical message handler that is used by a service consumer. It processes requests before they are sent to the service provider.
Example 41.7. Logical Message Handler Message Processing
public class SmallNumberHandler implements LogicalHandler<LogicalMessageContext>
{
public final boolean handleMessage(LogicalMessageContext messageContext)
{
try
{
boolean outbound = (Boolean)messageContext.get(MessageContext.MESSAGE_OUTBOUND_PROPERTY);
if (outbound) 1
{
LogicalMessage msg = messageContext.getMessage(); 2
JAXBContext jaxbContext = JAXBContext.newInstance(ObjectFactory.class);
Object payload = msg.getPayload(jaxbContext); 3
if (payload instanceof JAXBElement)
{
payload = ((JAXBElement)payload).getValue();
}
if (payload instanceof AddNumbers) 4
{
AddNumbers req = (AddNumbers)payload;
int a = req.getArg0();
int b = req.getArg1();
int answer = a + b;
if (answer < 20) 5
{
AddNumbersResponse resp = new AddNumbersResponse(); 6
resp.setReturn(answer);
msg.setPayload(new ObjectFactory().createAddNumbersResponse(resp),
jaxbContext);
return false; 7
}
}
else
{
throw new WebServiceException("Bad Request"); 8
}
}
return true; 9
}
catch (JAXBException ex) 10
{
throw new ProtocolException(ex);
}
}
...
}
The code in Example 41.7, “Logical Message Handler Message Processing” does the following:
- 1
- Checks if the message is an outbound request.If the message is an outbound request, the handler does additional message processing.
- 2
- Gets the
LogicalMessagerepresentation of the message payload from the message context. - 3
- Gets the actual message payload as a JAXB object.
- 4
- Checks to make sure the request is of the correct type.If it is, the handler continues processing the message.
- 5
- Checks the value of the sum.If it is less than the threshold of 20 then it builds a response and returns it to the client.
- 6
- Builds the response.
- 7
- Returns
falseto stop message processing and return the response to the client. - 8
- Throws a runtime exception if the message is not of the correct type.This exception is returned to the client.
- 9
- Returns
trueif the message is an inbound response or the sum does not meet the threshold.Message processing continues normally. - 10
- Throws a
ProtocolExceptionif a JAXB marshalling error is encountered.The exception is passed back to the client after it is processed by thehandleFault()method of the handlers between the current handler and the client.
