このコンテンツは選択した言語では利用できません。
7.2. Adding Headers to a SOAP 1.2 Message
Overview
SOAP message headers are defined by adding
soap12:header elements to your SOAP 1.2 message. The soap12:header element is an optional child of the input, output, and fault elements of the binding. The SOAP header becomes part of the parent message. A SOAP header is defined by specifying a message and a message part. Each SOAP header can only contain one message part, but you can insert as many headers as needed.
Syntax
The syntax for defining a SOAP header is shown in Example 7.3, “SOAP Header Syntax”.
Example 7.3. SOAP Header Syntax
<binding name="headwig">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="weave">
<soap12:operation soapAction="" style="documment"/>
<input name="grain">
<soap12:body ... />
<soap12:header message="QName" part="partName"
use="literal|encoded"
encodingStyle="encodingURI"
namespace="namespaceURI" />
</input>
...
</binding>
The
soap12:header element’s attributes are described in Table 7.1, “soap12:header Attributes”.
Splitting messages between body and header
The message part inserted into the SOAP header can be any valid message part from the contract. It can even be a part from the parent message which is being used as the SOAP body. Because it is unlikely that you would send information twice in the same message, the SOAP 1.2 binding provides a means for specifying the message parts that are inserted into the SOAP body.
The
soap12:body element has an optional attribute, parts, that takes a space delimited list of part names. When parts is defined, only the message parts listed are inserted into the body of the SOAP 1.2 message. You can then insert the remaining parts into the message's header.
Note
When you define a SOAP header using parts of the parent message, Apache CXF automatically fills in the SOAP headers for you.
Example
Example 7.4, “SOAP 1.2 Binding with a SOAP Header” shows a modified version of the
orderWidgets service shown in Example 7.1, “Ordering System Interface”. This version is modified so that each order has an xsd:base64binary value placed in the header of the request and the response. The header is defined as being the keyVal part from the widgetKey message. In this case you are responsible for adding the application logic to create the header because it is not part of the input or output message.
Example 7.4. SOAP 1.2 Binding with a SOAP Header
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="widgetOrderForm.wsdl"
targetNamespace="http://widgetVendor.com/widgetOrderForm"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:tns="http://widgetVendor.com/widgetOrderForm"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsd1="http://widgetVendor.com/types/widgetTypes"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<types>
<schema targetNamespace="http://widgetVendor.com/types/widgetTypes"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<element name="keyElem" type="xsd:base64Binary"/>
</schema>
</types>
<message name="widgetOrder">
<part name="numOrdered" type="xsd:int"/>
</message>
<message name="widgetOrderBill">
<part name="price" type="xsd:float"/>
</message>
<message name="badSize">
<part name="numInventory" type="xsd:int"/>
</message>
<message name="widgetKey">
<part name="keyVal" element="xsd1:keyElem"/>
</message>
<portType name="orderWidgets">
<operation name="placeWidgetOrder">
<input message="tns:widgetOrder" name="order"/>
<output message="tns:widgetOrderBill" name="bill"/>
<fault message="tns:badSize" name="sizeFault"/>
</operation>
</portType>
<binding name="orderWidgetsBinding" type="tns:orderWidgets">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="placeWidgetOrder">
<soap12:operation soapAction="" style="document"/>
<input name="order">
<soap12:body use="literal"/>
<soap12:header message="tns:widgetKey" part="keyVal"/>
</input>
<output name="bill">
<soap12:body use="literal"/>
<soap12:header message="tns:widgetKey" part="keyVal"/>
</output>
<fault name="sizeFault">
<soap12:body use="literal"/>
</fault>
</operation>
</binding>
...
</definitions>
You can modify Example 7.4, “SOAP 1.2 Binding with a SOAP Header” so that the header value is a part of the input and output messages, as shown in Example 7.5, “SOAP 1.2 Binding for orderWidgets with a SOAP Header”. In this case
keyVal is a part of the input and output messages. In the soap12:body elements the parts attribute specifies that keyVal should not be inserted into the body. However, it is inserted into the header.
Example 7.5. SOAP 1.2 Binding for orderWidgets with a SOAP Header
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="widgetOrderForm.wsdl"
targetNamespace="http://widgetVendor.com/widgetOrderForm"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:tns="http://widgetVendor.com/widgetOrderForm"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsd1="http://widgetVendor.com/types/widgetTypes"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<types>
<schema targetNamespace="http://widgetVendor.com/types/widgetTypes"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<element name="keyElem" type="xsd:base64Binary"/>
</schema>
</types>
<message name="widgetOrder">
<part name="numOrdered" type="xsd:int"/>
<part name="keyVal" element="xsd1:keyElem"/>
</message>
<message name="widgetOrderBill">
<part name="price" type="xsd:float"/>
<part name="keyVal" element="xsd1:keyElem"/>
</message>
<message name="badSize">
<part name="numInventory" type="xsd:int"/>
</message>
<portType name="orderWidgets">
<operation name="placeWidgetOrder">
<input message="tns:widgetOrder" name="order"/>
<output message="tns:widgetOrderBill" name="bill"/>
<fault message="tns:badSize" name="sizeFault"/>
</operation>
</portType>
<binding name="orderWidgetsBinding" type="tns:orderWidgets">
<soap12:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="placeWidgetOrder">
<soap12:operation soapAction="" style="document"/>
<input name="order">
<soap12:body use="literal" parts="numOrdered"/>
<soap12:header message="tns:widgetOrder" part="keyVal"/>
</input>
<output name="bill">
<soap12:body use="literal" parts="bill"/>
<soap12:header message="tns:widgetOrderBill" part="keyVal"/>
</output>
<fault name="sizeFault">
<soap12:body use="literal"/>
</fault>
</operation>
</binding>
...
</definitions>