このコンテンツは選択した言語では利用できません。
Chapter 3. Securing the Undertow HTTP Server
Abstract
You can configure the built-in Undertow HTTP server to use SSL/TLS security by editing the contents of the etc/undertow.xml configuration file. In particular, you can add SSL/TLS security to the Fuse Console in this way.
3.1. Undertow server
The Fuse container is pre-configured with an Undertow server, which acts as a general-purpose HTTP server and HTTP servlet container. Through a single HTTP port (by default, http://localhost:8181), the Undertow container can host multiple services, for example:
-
Fuse Console (by default,
http://localhost:8181/hawtio) - Apache CXF Web services endpoints (if the host and port are left unspecified in the endpoint configuration)
- Some Apache Camel endpoints
If you use the default Undertow server for all of your HTTP endpoints, you can conveniently add SSL/TLS security to these HTTP endpoints by following the steps described here.
3.2. Create X.509 certificate and private key
Before you can enable SSL/TLS on the Undertow server, you must create an X.509 certificate and private key, where the certificate and private key must be in Java keystore format (JKS format). For details of how to create a signed certificate and private key, see Appendix A, Managing Certificates.
3.3. Enabling SSL/TLS for Undertow in an Apache Karaf container
For the following procedure, it is assumed that you have already created a signed X.509 certificate and private key pair in the keystore file, alice.ks, with keystore password, StorePass, and key password, KeyPass.
To enable SSL/TLS for Undertow in a Karaf container:
Make sure that the Pax Web server is configured to take its configuration from the
etc/undertow.xmlfile. When you look at the contents of theetc/org.ops4j.pax.web.cfgfile, you should see the following setting:org.ops4j.pax.web.config.file=${karaf.etc}/undertow.xmlOpen the file,
etc/org.ops4j.pax.web.cfg, in a text editor and add the following line:org.osgi.service.http.port.secure=8443
Save and close the file,
etc/org.ops4j.pax.web.cfg.-
Open the file,
etc/undertow.xml, in a text editor. The next steps assume you are working with the defaultundertow.xmlfile, unchanged since installation time. Search for the XML elements,
http-listenerandhttps-listener. Comment out thehttp-listenerelement (by enclosing it between<!--and-->) and uncomment thehttps-listenerelement (spread over two lines). The edited fragment of XML should now look something like this:<!-- HTTP(S) Listener references Socket Binding (and indirectly - Interfaces) --> <!-- http-listener name="http" socket-binding="http" /> --> <!-- verify-client: org.xnio.SslClientAuthMode.NOT_REQUESTED, org.xnio.SslClientAuthMode.REQUESTED, org.xnio.SslClientAuthMode.REQUIRED --> <https-listener name="https" socket-binding="https" security-realm="https" verify-client="NOT_REQUESTED" />Search for the
w:keystoreelement. By default, thew:keystoreelement is configured as follows:<w:keystore path="${karaf.etc}/certs/server.keystore" provider="JKS" alias="server" keystore-password="secret" key-password="secret" generate-self-signed-certificate-host="localhost" />To install the
alicecertificate as the Undertow server’s certificate, modify thew:keystoreelement attributes as follows:-
Set
pathto the absolute location of thealice.ksfile on the file system. -
Set
providertoJKS. -
Set
aliasto thealicecertificate alias in the keystore. -
Set
keystore-passwordto the value of the password that unlocks the key store. -
Set
key-passwordto the value of the password that encrypts thealiceprivate key. -
Delete the
generate-self-signed-certificate-hostattribute setting.
-
Set
For example, after installing the
alice.kskeystore, the modifiedw:keystoreelement would look something like this:<w:keystore path="${karaf.etc}/certs/alice.ks" provider="JKS" alias="alice" keystore-password="StorePass" key-password="KeyPass" />Search for the
<interface name="secure">tag, which is used to specify the IP addresses the secure HTTPS port binds to. By default, this element is commented out, as follows:<!--<interface name="secure">--> <!--<w:inet-address value="127.0.0.1" />--> <!--</interface>-->Uncomment the element and customize the
valueattribute to specify the IP address which the HTTPS port binds to. For example, the wildcard value,0.0.0.0, configures HTTPS to bind to all available IP addresses:<interface name="secure"> <w:inet-address value="0.0.0.0" /> </interface>Search for and uncomment the
<socket-binding name="https"tag. When this tag is uncommented, it should look something like this:<socket-binding name="https" interface="secure" port="${org.osgi.service.http.port.secure}" />-
Save and close the file,
etc/undertow.xml. - Restart the Fuse container, in order for the configuration changes to take effect.
3.4. Customizing allowed TLS protocols and cipher suites
You can customize the allowed TLS protocols and cipher suites by modifying the following attributes of the w:engine element in the etc/undertow.xml file:
enabled-cipher-suites- Specifies the list of allowed TLS/SSL cipher suites.
enabled-protocolsSpecifies the list of allowed TLS/SSL protocols.
WarningDo not enable
SSLprotocol versions, as they are vulnerable to attack. Use onlyTLSprotocol versions.
For full details of the available protocols and cipher suites, consult the appropriate JVM documentation and security provider documentation. For example, for Java 8, see Java Cryptography Architecture Oracle Providers Documentation for JDK 8.
3.5. Connect to the secure console
After configuring SSL security for the Undertow server in the Pax Web configuration file, you should be able to open the Fuse Console by browsing to the following URL:
https://localhost:8443/hawtio
Remember to type the https: scheme, instead of http:, in this URL.
Initially, the browser will warn you that you are using an untrusted certificate. Skip this warning and you will be presented with the login screen for the Fuse Console.
