付録A リファレンス資料
A.1. JacORB サブシステム移行操作の警告
The migrate
operation is not able to process all resources and attributes. The following table lists some of the warnings you might see when you run either the migrate
or describe-migration
operation for the jacorb
subsystem.
migrate
操作の出力に「Could not migrate」または「Can not migrate」エントリーが記録された場合、サーバー設定の移行は正常に完了したにも関わらず、すべての要素および属性を自動的に移行できなかったことを表します。「migration-warnings」の提案に従ってこれらの設定を変更する必要があります。
警告メッセージ | メッセージの意味 / 修正方法 |
---|---|
The |
$ EAP_HOME/bin/standalone.sh --admin-only |
Properties X cannot be emulated using OpenJDK ORB and are not supported (プロパティー X は OpenJDK ORB を使用してエミュレートできず、サポートされていません) |
指定プロパティーの設定はサポートされず、新しい
サポートされないプロパティーには以下が含まれます: |
The properties X use expressions. Configuration properties that are used to resolve those expressions should be transformed manually to the new |
式を使用するプロパティーは管理者が手作業で設定する必要があります。
たとえば、JBoss EAP 6 の |
Can not migrate: the new |
メッセージには説明が含まれています。 |
A.2. Messaging サブシステム移行操作の警告
The migrate
operation is not able to process all resources and attributes. The following table lists some of the warnings you might see when you run either the migrate
or describe-migration
operation for the messaging
subsystem.
migrate
操作の出力に「Could not migrate」または「Can not migrate」エントリーが記録された場合、サーバー設定の移行は正常に完了したにも関わらず、すべての要素および属性を自動的に移行できなかったことを表します。「migration-warnings」の提案に従ってこれらの設定を変更する必要があります。
警告メッセージ | メッセージの意味 / 修正方法 |
---|---|
The |
$ EAP_HOME/bin/standalone.sh --admin-only |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
|
Classes providing the X are discarded during the migration. To use them in the new |
JBoss EAP 7 のメッセージングインターセプターのサポートは大幅に異なります。以前のバージョンのサブシステムに設定されたインターセプターはすべて移行中に破棄されます。詳細は メッセージングインターセプターの移行を参照してください。 |
Can not migrate the HA configuration of X. Its |
これは、 |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
メッセージには説明が含まれています。 |
Can not migrate attribute |
|
Can not create a |
JBoss EAP 6 クライアントが JBoss EAP 7 に接続できるようにするため、レガシーの HornetQ リモート |
Can not migrate attribute X from resource Y. The attribute uses an expression that can be resolved differently depending on system properties. After migration, this attribute must be added back with an actual value instead of the expression. (リソース Y から属性 X を移行できません。属性はシステムプロパティーに応じて異なって解決される式を使用します。移行後、式の代わりに実際の値を用いてこの属性を戻す必要があります。) |
この警告は、移行処理中に属性 X を具体的な値に解決できないときに表示されます。値は破棄され、属性を手作業で移行する必要があります。これは以下の場合に発生します。
|
Can not migrate attribute X from resource Y. This attribute is not supported by the new |
一部の属性は新しい
|
Can not migrate attribute |
メッセージには説明が含まれています。 |
非推奨の broadcast-group または discovery-group 属性の置き換え
非推奨の broadcast-group
または discovery-group
属性を socket-binding
属性に置き換えるよう通知された場合、管理 CLI を使用して socket-binding
属性を追加できます。
以下の例では、messaging
サブシステムに以下の discovery-group
設定が含まれるスタンドアロンサーバーを移行することを前提とします。
<discovery-groups> <discovery-group name="my-discovery-group"> <group-address>224.0.1.105</group-address> <group-port>56789</group-port> </discovery-group> </discovery-groups>
messaging
サブシステムに対して migrate
操作を実行すると、以下の出力および警告が表示されます。
[standalone@localhost:9999 /] /subsystem=messaging:migrate { "outcome" => "success", "result" => {"migration-warnings" => [ "WFLYMSG0084: Can not migrate attribute group-address from resource [ (\"subsystem\" => \"messaging-activemq\"), (\"server\" => \"default\"), (\"discovery-group\" => \"my-discovery-group\") ]. Use instead the socket-binding attribute to configure this discovery-group.", "WFLYMSG0084: Can not migrate attribute group-port from resource [ (\"subsystem\" => \"messaging-activemq\"), (\"server\" => \"default\"), (\"discovery-group\" => \"my-discovery-group\") ]. Use instead the socket-binding attribute to configure this discovery-group." ]} }
migrate
操作によって、"my-discovery-group" という名前の discovery-group
が新しい messaging-activemq
サブシステムに作成され、以下のように設定されます。
<discovery-group name="my-discovery-group"/>
ここで、以下の管理 CLI コマンドを使用して、"my-discovery-group-socket-binding" という名前のサーバー設定ファイルに socket-binding
要素を作成する必要があります。
/socket-binding-group=standard-sockets/socket-binding=my-discovery-group-socket-binding:add(multicast-address=224.0.1.105, multicast-port=56789)
次に、以下の管理 CLI コマンドを使用して、新たに作成された socket-binding
をサーバー設定ファイルにある messaging-activemq
サブシステムの "my-discovery-group" という名前の discovery-group
に追加します。
/subsystem=messaging-activemq/server=default/discovery-group=my-discovery-group:write-attribute(name=socket-binding,value=my-discovery-group-socket-binding)
これらのコマンドによって、サーバー設定ファイルに以下の XML が作成されます。
<subsystem xmlns="urn:jboss:domain:messaging-activemq:1.0"> <server name="default"> ... <discovery-group name="my-discovery-group" socket-binding="my-discovery-group-socket-binding"/> ... </server> </subsystem> ... <socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}"> ... <socket-binding name="my-discovery-group-socket-binding" multicast-address="224.0.1.105" multicast-port="56789"/> ... </socket-binding-group>
A.3. Web サブシステム移行操作の警告
The migrate
operation is not able to process all resources and attributes. The following table lists some of the warnings you might see when you run either the migrate
or describe-migration
operation for the web
subsystem.
migrate
操作の出力に「Could not migrate」または「Can not migrate」エントリーが記録された場合、サーバー設定の移行は正常に完了したにも関わらず、すべての要素および属性を自動的に移行できなかったことを表します。「migration-warnings」の提案に従ってこれらの設定を変更する必要があります。
警告メッセージ | メッセージの意味 / 修正方法 |
---|---|
Migrate operation only allowed in admin only mode (移行操作は管理専用モードのみで許可されます) |
$ EAP_HOME/bin/standalone.sh --admin-only |
Could not migrate resource X (リソース X を移行できませんでした) |
以前のリリースの JBoss EAP でこのリソースによって示された動作は移行されませんでした。管理者は JBoss EAP 7 の新しい |
Could not migrate attribute X from resource Y. (リソース Y から属性 X を移行できません。) |
以前のリリースの JBoss EAP でこのリソース属性によって示された動作は移行されませんでした。管理者は JBoss EAP 7 の新しい See Web Subsystem Migration Operation Attribute Warnings for the list of attributes that are not migrated. |
Could not migrate SSL connector as no SSL config is defined (定義された SSL 設定がないため SSL コネクターを移行できませんでした) |
メッセージには説明が含まれています。 |
Could not migrate |
メッセージには説明が含まれています。 |
Could not migrate |
メッセージには説明が含まれています。 |
Could not migrate valve X (バルブ X を移行できませんでした) |
以前のリリースの JBoss EAP でこのバルブによって示された動作は移行されませんでした。管理者は JBoss EAP 7 の新しい This warning can occur for the following valves:
|
Could not migrate attribute X from valve Y (バルブ Y から属性 X を移行できませんでした) |
The behavior exhibited by this valve attribute in the previous release of JBoss EAP was not migrated. The administrator must verify if the new
|
Web Subsystem Migration Operation Attribute Warnings
The migrate
operation is not able to process all JBoss Web attributes. See the following reference tables for information about how to migrate the unprocessed attributes manually.
Web SSL Connector Attributes
The following attributes were used in JBoss EAP 6 to configure the SSL connector. OpenSSL native libraries are not supported in JBoss EAP 7 so there are no equivalent settings.
Attribute | 説明 | Undertow Equivalent |
---|---|---|
ca-revocation-url |
The file or URL that contains the revocation list. |
No equivalent in Undertow. |
certificate-file |
When using OpenSSL encryption, the path to the file containing the server certificate. |
No equivalent in Undertow. |
ssl-protocol |
The SSL protocol string. |
No equivalent in Undertow. |
verify-depth |
The maximum number of intermediate certificate issuers checked before deciding that the clients do not have a valid certificate. |
No equivalent in Undertow. |
Web Static Resource Attributes
The following static-resources
element attributes were used to describe how static resources were handled by the DefaultServlet
or by the WebdavServlet
. There are no equivalents for these attributes because WebDAV is not supported by Undertow. For more information, see https://issues.jboss.org/browse/JBEAP-1036.
Attribute | 説明 | Undertow Equivalent |
---|---|---|
disabled |
Enable the default Servlet mapping. |
No equivalent setting in Undertow. |
file-encoding |
File encoding to be used when reading static files. |
No equivalent setting in Undertow. |
max-depth |
Maximum recursion for |
This is a WebDAV setting and WebDAV is not supported by Undertow. |
read-only |
Allow write HTTP methods (PUT, DELETE). |
This is a WebDAV setting and WebDAV is not supported by Undertow. |
secret |
Secret for WebDAV locking operations. |
This is a WebDAV setting and WebDAV is not supported by Undertow. |
sendfile |
Enable sendfile if possible, for files bigger than the specified byte size. |
This is set to a sensible default value in Undertow and is not configurable. |
webdav |
Enable WebDAV functionality. |
WebDAV is not supported by Undertow. |
Web SSO Resource Attributes
SSO is handled differently than in the previous release and there are no equivalent attribute settings in JBoss EAP 7.
JBoss Web Attribute | 説明 | Undertow Equivalent |
---|---|---|
cache-container |
Name of the cache container to use for clustered SSO. |
This setting is no longer needed in Undertow. This works by default across a distributed clustered environment. |
cache-name |
Name of the cache to use for clustered SSO. |
This setting is no longer needed in Undertow. This works by default across a distributed clustered environment. |
reauthenticate |
Whether each request should cause a reauthentication. |
There is no equivalent setting in Undertow, which behaves similarly to the |
Web Access Log Attributes
JBoss Web Attribute | 説明 | Undertow Equivalent |
---|---|---|
resolve-hosts |
Whether to enable resolving hosts for access logging. |
Use the setting on the connector to accomplish the same behavior. |
Web Connector Attributes
JBoss Web Attribute | 説明 | Undertow Equivalent |
---|---|---|
executor |
The name of the executor that should be used to process the threads of this connector. |
You now reference a worker that is defined in the See Migrate the Threads Subsystem Configuration for more information. |
proxy-binding |
The socket binding to define the host and port that is used when sending a redirect. |
There is no direct equivalent. See https-listener Attributes in the JBoss EAP Configuration Guide for available configuration options. |
redirect-port |
The port for redirection to a secure connector. |
This attribute was deprecated in JBoss EAP 6 and replaced with See https-listener Attributes in the JBoss EAP Configuration Guide for more information. |
A.4. Migrate JBoss Web System Properties Reference
This reference describes how to map system properties previously used for JBoss Web configuration to the equivalent configuration for Undertow in JBoss EAP 7.
JBoss EAP 6 System Property |
description |
Equivalent in JBoss EAP 7 | |
jvmRoute |
Provides a default value for the
It supports |
Management CLI command: /subsystem=undertow:write-attribute(name=instance-id,value=VALUE) | |
org.apache.tomcat.util.buf.StringCache.byte.enabled |
If |
No equivalent configuration | |
org.apache.tomcat.util.buf.StringCache.char.enabled |
If |
No equivalent configuration | |
org.apache.tomcat.util.buf.StringCache.cacheSize |
The size of the String cache. If the value is not specified, the default value of |
No equivalent configuration | |
org.apache.tomcat.util.buf.StringCache.maxStringSize |
The maximum length of String that will be cached. If the value is not specified, the default value of |
No equivalent configuration | |
org.apache.tomcat.util.http.FastHttpDateFormat.CACHE_SIZE |
The size of the cache to use parsed and formatted date value. If the value is not specified, the default value of |
No equivalent configuration | |
org.apache.catalina.core.StandardService.DELAY_CONNECTOR_STARTUP |
If |
No equivalent configuration | |
org.apache.catalina.connector.Request.SESSION_ID_CHECK |
If |
No equivalent configuration | |
org.apache.coyote.Constants.USE_CUSTOM_STATUS_MSG_IN_HEADER |
If |
Must be enabled programmatically by implementing a custom | |
org.apache.tomcat.util.http.Parameters.MAX_COUNT |
The maximum number of parameters that can be parsed in a post body. If exceeded, parsing fails using an |
Management CLI command: /subsystem=undertow/server=default-server/http-listener=default:write-attribute(name=max-parameters,value=VALUE) /subsystem=undertow/server=default-server/https-listener=default:write-attribute(name=max-parameters,value=VALUE) /subsystem=undertow/server=default-server/ajp-listener=default:write-attribute(name=max-parameters,value=VALUE) | |
org.apache.tomcat.util.http.MimeHeaders.MAX_COUNT |
The maximum number of headers that can be sent in the HTTP request. If exceeded, parsing will fail using an |
Management CLI command: /subsystem=undertow/server=default-server/http-listener=default:write-attribute(name=max-headers,value=VALUE) /subsystem=undertow/server=default-server/https-listener=default:write-attribute(name=max-headers,value=VALUE) /subsystem=undertow/server=default-server/ajp-listener=default:write-attribute(name=max-headers,value=VALUE) | |
org.apache.tomcat.util.net.MAX_THREADS |
The maximum number of threads a connector is going to use to process requests. The default value is |
Management CLI command: /subsystem=io/worker=default:write-attribute(name=task-max-threads, value=VALUE) | |
org.apache.coyote.http11.Http11Protocol.MAX_HEADER_SIZE |
The maximum size of the HTTP headers, in bytes. If exceeded, parsing will fail using an |
Management CLI command: /subsystem=undertow/server=default-server/http-listener=default:write-attribute(name=max-header-size,value=VALUE) /subsystem=undertow/server=default-server/https-listener=default:write-attribute(name=max-header-size,value=VALUE) /subsystem=undertow/server=default-server/ajp-listener=default:write-attribute(name=max-header-size,value=VALUE) | |
org.apache.coyote.http11.Http11Protocol.COMPRESSION |
Allows using simple compression with the HTTP connector. The default value is |
Configure a filter using the management CLI: # Create a filter /subsystem=undertow/configuration=filter/gzip=gzipfilter:add() /subsystem=undertow/server=default-server/host=default-host/filter-ref=gzipfilter:add() | |
org.apache.coyote.http11.Http11Protocol.COMPRESSION_RESTRICTED_UA |
圧縮されたコンテンツを受け取らないユーザーエージェント regexps。デフォルト値は空です。 |
Configure a predicate in a filter using the management CLI: # Use a predicate in a filter /subsystem=undertow/configuration=filter/gzip=gzipfilter:add() /subsystem=undertow/server=default-server/host=default-host/filter-ref=gzipfilter:add(predicate="regex[pattern='AppleWebKit',value=%{i,User-Agent}]") | |
org.apache.coyote.http11.Http11Protocol.COMPRESSION_MIME_TYPES |
Content type prefixes of compressible content. The default value is |
Configure a predicate in a filter using the management CLI: # Use a predicate in a filter /subsystem=undertow/configuration=filter/gzip=gzipfilter:add() /subsystem=undertow/server=default-server/host=default-host/filter-ref=gzipfilter:add(predicate="regex[pattern='text/html',value=%{o,Content-Type}]") | |
org.apache.coyote.http11.Http11Protocol.COMPRESSION_MIN_SIZE |
Minimum size of content that will be compressed. The default value is |
Configure a predicate in a filter using the management CLI: # Use a predicate in a filter /subsystem=undertow/configuration=filter/gzip=gzipfilter:add() /subsystem=undertow/server=default-server/host=default-host/filter-ref=gzipfilter:add(predicate="max-content-size[value=MIN_SIZE]") | |
org.apache.coyote.http11.DEFAULT_CONNECTION_TIMEOUT |
Default socket timeout. The default value is |
Management CLI command: /subsystem=undertow/server=default-server/http-listener=default:write-attribute(name=no-request-timeout,value=VALUE) /subsystem=undertow/server=default-server/https-listener=default:write-attribute(name=no-request-timeout,value=VALUE) /subsystem=undertow/server=default-server/ajp-listener=default:write-attribute(name=no-request-timeout,value=VALUE) | |
org.jboss.as.web.deployment.DELETE_WORK_DIR_ONCONTEXTDESTROY |
Use this property to remove |
No equivalent configuration | |
org.apache.tomcat.util.buf.StringCache.trainThreshold |
Specifies the number of times |
No equivalent configuration |
JBoss EAP 6 System Property |
description |
Equivalent in JBoss EAP 7 | |
org.apache.el.parser.COERCE_TO_ZERO |
If |
System property is still valid and processed by the EL |
JBoss EAP 6 System Property |
description |
Equivalent in JBoss EAP 7 | |
org.apache.jasper.compiler.Generator.VAR_EXPRESSIONFACTORY |
The name of the variable to use for the expression language expression factory. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.compiler.Generator.VAR_INSTANCEMANAGER |
The name of the variable to use for the instance manager factory. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.compiler.Parser.STRICT_QUOTE_ESCAPING |
If |
System property has not changed | |
org.apache.jasper.Constants.DEFAULT_TAG_BUFFER_SIZE |
Any tag buffer that expands beyond |
System property has not changed | |
org.apache.jasper.runtime.JspFactoryImpl.USE_POOL |
If |
System property has not changed | |
org.apache.jasper.runtime.JspFactoryImpl.POOL_SIZE |
The size of the ThreadLocal PageContext. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.JSP_SERVLET_BASE |
The base class of the Servlets generated from the JSPs. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.SERVICE_METHOD_NAME |
The name of the service method called by the base class. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.SERVLET_CLASSPATH |
The name of the ServletContext attribute that provides the class path for the JSP. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.JSP_FILE |
The name of the request attribute for |
System property has not changed | |
org.apache.jasper.Constants.PRECOMPILE |
The name of the query parameter that causes the JSP engine to just pregenerate the servlet but not invoke it. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.JSP_PACKAGE_NAME |
The default package name for compiled JSP pages. If value not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.TAG_FILE_PACKAGE_NAME |
The default package name for tag handlers generated from tag files. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.TEMP_VARIABLE_NAME_PREFIX |
Prefix to use for generated temporary variable names. If value is not specified, the default value of |
System property has not changed | |
org.apache.jasper.Constants.USE_INSTANCE_MANAGER_FOR_TAGS |
If |
System property has not changed | |
org.apache.jasper.Constants.INJECT_TAGS |
If |
System property has not changed |
JBoss EAP 6 System Property |
description |
Equivalent in JBoss EAP 7 | |
org.apache.catalina.connector.RECYCLE_FACADES |
If this is |
No equivalent configuration | |
org.apache.catalina.connector.CoyoteAdapter.ALLOW_BACKSLASH |
If this is |
No equivalent configuration | |
org.apache.tomcat.util.buf.UDecoder.ALLOW_ENCODED_SLASH |
If this is |
Management CLI command: /subsystem=undertow/server=default-server/http-listener=default:write-attribute(name=allow-encoded-slash,value=VALUE) /subsystem=undertow/server=default-server/https-listener=default:write-attribute(name=allow-encoded-slash,value=VALUE) /subsystem=undertow/server=default-server/ajp-listener=default:write-attribute(name=allow-encoded-slash,value=VALUE) | |
org.apache.catalina.STRICT_SERVLET_COMPLIANCE |
If value is not specified, |
Compliant by default | |
org.apache.catalina.core.StandardWrapperValve.SERVLET_STATS |
If |
No equivalent configuration | |
org.apache.catalina.session.StandardSession.ACTIVITY_CHECK |
If this is |
No equivalent configuration |
A.5. リリース間の互換性および相互運用性
ここでは、JBoss EAP 5、JBoss EAP 6、および JBoss EAP 7 リリース間での、クライアントおよびサーバー EJB とメッセージングコンポーネントの互換性および相互運用性について説明します。
IIOP 上の EJB リモーティング
以下の設定では問題が発生しません。
- JBoss EAP 5 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 5 サーバーへの接続
JNDI を使用した EJB リモーティング
以下の設定では問題が発生しません。
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
JBoss EAP 6 では、EJB 3.1 仕様のサポートが提供され、標準化されたグローバル JNDI ネームスペースが導入されました。JBoss EAP 7 でも標準化されたグローバル JNDI ネームスペースは使用されますが、JNDI ネームスペースの名前が変更になったため、以下の設定は互換性がありません。
- JBoss EAP 5 クライアントから JBoss EAP 7 または JBoss EAP 6 サーバーへの接続
- JBoss EAP 7 または JBoss EAP 6 クライアントから JBoss EAP 5 サーバーへの接続
標準化された JNDI ネームスペースの変更に関する詳細は、JBoss EAP 6 移行ガイドの JNDI の変更を参照してください。
@WebService を使用した EJB リモーティング
以下の設定では問題が発生しません。
- JBoss EAP 5 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 5 サーバーへの接続
メッセージングスタンドアロンクライアント
以下の設定では問題が発生しません。
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
以下の設定では、クライアントが汎用 JMS API ではなくメッセージングブローカー専用の HornetQ API を使用すれば接続が可能です。しかし、JBoss EAP 7 に同梱される JBoss EAP レガシー JNDI ネーミング拡張を使用して JNDI ルックアップに対応する必要があります。
- JBoss EAP 5 クライアントから JBoss EAP 7 サーバーへの接続
プロトコル互換性の問題があるため、JBoss EAP 7 のビルトインメッセージングは JBoss EAP 5 に同梱された HornetQ 2.2.x へは接続できません。そのため、以下の設定は互換性がありません。
- JBoss EAP 7 クライアントから JBoss EAP 5 サーバーへの接続
メッセージング MDB
以下の設定では問題が発生しません。
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
以下の設定では、クライアントが汎用 JMS API ではなくメッセージングブローカー専用の HornetQ API を使用すれば接続が可能です。しかし、JBoss EAP 7 に同梱される JBoss EAP レガシー JNDI ネーミング拡張を使用して JNDI ルックアップに対応する必要があります。
- JBoss EAP 5 クライアントから JBoss EAP 7 サーバーへの接続
プロトコル互換性の問題があるため、JBoss EAP 7 のビルトインメッセージングは JBoss EAP 5 に同梱された HornetQ 2.2.x へは接続できません。そのため、以下の設定は互換性がありません。
- JBoss EAP 7 クライアントから JBoss EAP 5 サーバーへの接続
JMS ブリッジ
以下の設定では問題が発生しません。
- JBoss EAP 5 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 6 クライアントから JBoss EAP 7 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 6 サーバーへの接続
- JBoss EAP 7 クライアントから JBoss EAP 5 サーバーへの接続
Revised on 2018-01-12 05:22:35 EST