2.35.13. hammer host interface

ホストにインターフェイスを作成します。

Usage:
    hammer host interface create [OPTIONS]

Options:
 --attached-devices ATTACHED_DEVICES     Identifiers of attached interfaces, e.g. `['eth1',
                                         'eth2']`. For bond interfaces those are the slaves. Only for bond
                                         And bridges interfaces.
                                         Comma separated list of values. Values containing comma should be quoted or escaped with backslash.
                                         JSON is acceptable and preferred way for complex parameters
 --attached-to ATTACHED_TO               Identifier of the interface to which this interface belongs, e.g. eth1.
                                         Only for virtual interfaces.
 --bond-options BOND_OPTIONS             Space separated options, e.g. miimon=100. Only for bond interfaces.
 --compute-attributes COMPUTE_ATTRS      Compute resource specific attributes
                                         Comma-separated list of key=value.
                                         JSON is acceptable and preferred way for complex parameters
 --domain DOMAIN_NAME                    Domain name
 --domain-id DOMAIN_ID                   Satellite domain ID of interface. Required for primary interfaces on
                                         Managed hosts.
 --execution EXECUTION                   Should this interface be used for remote execution?
                                         One of true/false, yes/no, 1/0.
 --host HOST_NAME                        Host name
 --host-id HOST_ID                       ID or name of host
 --identifier IDENTIFIER                 Device identifier, e.g. eth0 or eth1.1
 --ip IP                                 IPv4 address of interface
 --ip6 IP6                               IPv6 address of interface
 --location LOCATION_NAME                Set the current location context for the request
 --location-id LOCATION_ID               Set the current location context for the request
 --location-title LOCATION_TITLE         Set the current location context for the request
 --mac MAC                               MAC address of interface. Required for managed interfaces on bare metal.
 --managed MANAGED                       Should this interface be managed via DHCP and DNS capsule and should it be
                                         Configured during provisioning?
                                         One of true/false, yes/no, 1/0.
 --mode MODE                             Bond mode of the interface, e.g. balance-rr. Only for bond interfaces.
                                         Possible value(s): 'balance-rr', 'active-backup', 'balance-xor', 'broadcast', '802.3ad', 'balance-tlb', 'balance-alb'
 --mtu MTU                               MTU, this attribute has precedence over the subnet MTU.
 --name NAME                             Interface's DNS name
 --organization ORGANIZATION_NAME        Set the current organization context for the request
 --organization-id ORGANIZATION_ID       Set the current organization context for the request
 --organization-title ORGANIZATION_TITLE Set the current organization context for the request
 --password PASSWORD                     Only for BMC interfaces.
 --primary                               Should this interface be used for constructing the FQDN of the host? Each managed hosts needs to have one primary interface
 --provider PROVIDER                     Interface provider, e.g. IPMI. Only for BMC interfaces.
                                         Possible value(s): 'IPMI', 'SSH'
 --provision                             Should this interface be used for TFTP of PXELinux (or SSH for image-based hosts)? Each managed hosts needs to have one provision interface
 --subnet SUBNET_NAME                    Subnet name
 --subnet-id SUBNET_ID                   Satellite subnet ID of IPv4 interface
 --subnet6-id SUBNET6_ID                 Satellite subnet ID of IPv6 interface
 --tag TAG                               VLAN tag, this attribute has precedence over the subnet VLAN ID. Only for
                                         Virtual interfaces.
 --type TYPE                             Interface type, e.g. bmc. Default is interface
                                         Possible value(s): 'interface', 'bmc', 'bond', 'bridge'
 --username USERNAME                     Only for BMC interfaces.
 --virtual VIRTUAL                       Alias or VLAN device
                                         One of true/false, yes/no, 1/0.
 -h, --help                              Print help