19.4. Virtualization firewall information


Various ports are used for communication between guests and management utilities.

Note

Any network service on a guest must have the applicable ports open on the guest to allow external access. If a network service on a guest is firewalled it will be inaccessible. Always verify the guests network configuration first.
  • ICMP requests must be accepted. ICMP packets are used for network testing. You cannot ping guests if ICMP packets are blocked.
  • Port 22 should be open for SSH access and the initial installation.
  • Ports 80 or 443 (depending on the security settings on the RHEV Manager) are used by the vdsm-reg service to communicate information about the host.
  • Ports 5634 to 6166 are used for guest console access with the SPICE protocol.
  • Port 8002 is used by Xen for live migration.
  • Ports 49152 to 49216 are used for migrations with KVM. Migration may use any port in this range depending on the number of concurrent migrations occurring.
  • Enabling IP forwarding (net.ipv4.ip_forward = 1) is required for virtual bridge devices. Note that installing libvirt enables this variable so it will be enabled when the virtualization packages are installed unless it was manually disabled.

Note

Note that enabling IP forwarding is not required for physical bridge devices. When a guest is connected through a physical bridge, traffic only operates at a level that does not require IP configuration such as IP forwarding.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat