6.13. 공동 배치되지 않은 시나리오에서 OSD 교체
중복되지 않은 시나리오에서 OSD가 실패하면 WAL/DB 장치를 교체할 수 있습니다. 절차는 DB 및 WAL 장치에 대해 동일합니다. DB 장치용 db_devices 아래의 경로 와 WAL 장치의 wal_devices 아래의 경로를 편집해야 합니다.
사전 요구 사항
- 실행 중인 Red Hat Ceph Storage 클러스터.
- 데몬은 결합되지 않습니다.
- OSD 실패
절차
클러스터의 장치를 확인합니다.
예제
[root@host01 ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 20G 0 disk ├─sda1 8:1 0 1G 0 part /boot └─sda2 8:2 0 19G 0 part ├─rhel-root 253:0 0 17G 0 lvm / └─rhel-swap 253:1 0 2G 0 lvm [SWAP] sdb 8:16 0 10G 0 disk └─ceph--5726d3e9--4fdb--4eda--b56a--3e0df88d663f-osd--block--3ceb89ec--87ef--46b4--99c6--2a56bac09ff0 253:2 0 10G 0 lvm sdc 8:32 0 10G 0 disk └─ceph--d7c9ab50--f5c0--4be0--a8fd--e0313115f65c-osd--block--37c370df--1263--487f--a476--08e28bdbcd3c 253:4 0 10G 0 lvm sdd 8:48 0 10G 0 disk ├─ceph--1774f992--44f9--4e78--be7b--b403057cf5c3-osd--db--31b20150--4cbc--4c2c--9c8f--6f624f3bfd89 253:7 0 2.5G 0 lvm └─ceph--1774f992--44f9--4e78--be7b--b403057cf5c3-osd--db--1bee5101--dbab--4155--a02c--e5a747d38a56 253:9 0 2.5G 0 lvm sde 8:64 0 10G 0 disk sdf 8:80 0 10G 0 disk └─ceph--412ee99b--4303--4199--930a--0d976e1599a2-osd--block--3a99af02--7c73--4236--9879--1fad1fe6203d 253:6 0 10G 0 lvm sdg 8:96 0 10G 0 disk └─ceph--316ca066--aeb6--46e1--8c57--f12f279467b4-osd--block--58475365--51e7--42f2--9681--e0c921947ae6 253:8 0 10G 0 lvm sdh 8:112 0 10G 0 disk ├─ceph--d7064874--66cb--4a77--a7c2--8aa0b0125c3c-osd--db--0dfe6eca--ba58--438a--9510--d96e6814d853 253:3 0 5G 0 lvm └─ceph--d7064874--66cb--4a77--a7c2--8aa0b0125c3c-osd--db--26b70c30--8817--45de--8843--4c0932ad2429 253:5 0 5G 0 lvm sr0
Cephadm 쉘에 로그인합니다.
예제
[root@host01 ~]# cephadm shell
OSD 및 해당 DB 장치를 식별합니다.
예제
[ceph: root@host01 /]# ceph-volume lvm list /dev/sdh ====== osd.2 ======= [db] /dev/ceph-d7064874-66cb-4a77-a7c2-8aa0b0125c3c/osd-db-0dfe6eca-ba58-438a-9510-d96e6814d853 block device /dev/ceph-5726d3e9-4fdb-4eda-b56a-3e0df88d663f/osd-block-3ceb89ec-87ef-46b4-99c6-2a56bac09ff0 block uuid GkWLoo-f0jd-Apj2-Zmwj-ce0h-OY6J-UuW8aD cephx lockbox secret cluster fsid fa0bd9dc-e4c4-11ed-8db4-001a4a00046e cluster name ceph crush device class db device /dev/ceph-d7064874-66cb-4a77-a7c2-8aa0b0125c3c/osd-db-0dfe6eca-ba58-438a-9510-d96e6814d853 db uuid 6gSPoc-L39h-afN3-rDl6-kozT-AX9S-XR20xM encrypted 0 osd fsid 3ceb89ec-87ef-46b4-99c6-2a56bac09ff0 osd id 2 osdspec affinity non-colocated type db vdo 0 devices /dev/sdh ====== osd.5 ======= [db] /dev/ceph-d7064874-66cb-4a77-a7c2-8aa0b0125c3c/osd-db-26b70c30-8817-45de-8843-4c0932ad2429 block device /dev/ceph-d7c9ab50-f5c0-4be0-a8fd-e0313115f65c/osd-block-37c370df-1263-487f-a476-08e28bdbcd3c block uuid Eay3I7-fcz5-AWvp-kRcI-mJaH-n03V-Zr0wmJ cephx lockbox secret cluster fsid fa0bd9dc-e4c4-11ed-8db4-001a4a00046e cluster name ceph crush device class db device /dev/ceph-d7064874-66cb-4a77-a7c2-8aa0b0125c3c/osd-db-26b70c30-8817-45de-8843-4c0932ad2429 db uuid mwSohP-u72r-DHcT-BPka-piwA-lSwx-w24N0M encrypted 0 osd fsid 37c370df-1263-487f-a476-08e28bdbcd3c osd id 5 osdspec affinity non-colocated type db vdo 0 devices /dev/sdhosds.yaml파일에서관리되지 않는매개변수를true로 설정하고, 기타cephadm은 OSD를 재배포합니다.예제
[ceph: root@host01 /]# cat osds.yml service_type: osd service_id: non-colocated unmanaged: true placement: host_pattern: 'ceph*' data_devices: paths: - /dev/sdb - /dev/sdc - /dev/sdf - /dev/sdg db_devices: paths: - /dev/sdd - /dev/sdh
업데이트된 사양 파일을 적용합니다.
예제
[ceph: root@host01 /]# ceph orch apply -i osds.yml Scheduled osd.non-colocated update...
상태를 확인합니다.
예제
[ceph: root@host01 /]# ceph orch ls NAME PORTS RUNNING REFRESHED AGE PLACEMENT alertmanager ?:9093,9094 1/1 9m ago 4d count:1 crash 3/4 4d ago 4d * grafana ?:3000 1/1 9m ago 4d count:1 mgr 1/2 4d ago 4d count:2 mon 3/5 4d ago 4d count:5 node-exporter ?:9100 3/4 4d ago 4d * osd.non-colocated 8 4d ago 5s <unmanaged> prometheus ?:9095 1/1 9m ago 4d count:1
OSD를 제거합니다. OSD ID를 유지하려면
--zap옵션을 사용하여 백엔드 서비스와--replace옵션을 제거해야 합니다.예제
[ceph: root@host01 /]# ceph orch osd rm 2 5 --zap --replace Scheduled OSD(s) for removal
상태를 확인합니다.
예제
[ceph: root@host01 /]# ceph osd df tree | egrep -i "ID|host02|osd.2|osd.5" ID CLASS WEIGHT REWEIGHT SIZE RAW USE DATA OMAP META AVAIL %USE VAR PGS STATUS TYPE NAME -5 0.04877 - 55 GiB 15 GiB 4.1 MiB 0 B 60 MiB 40 GiB 27.27 1.17 - host02 2 hdd 0.01219 1.00000 15 GiB 5.0 GiB 996 KiB 0 B 15 MiB 10 GiB 33.33 1.43 0 destroyed osd.2 5 hdd 0.01219 1.00000 15 GiB 5.0 GiB 1.0 MiB 0 B 15 MiB 10 GiB 33.33 1.43 0 destroyed osd.5
osds.yaml사양 파일을 편집하여관리되지 않는매개변수를false로 변경하고 장치가 물리적으로 교체된 후 변경된 경우 DB 장치의 경로를 바꿉니다.예제
[ceph: root@host01 /]# cat osds.yml service_type: osd service_id: non-colocated unmanaged: false placement: host_pattern: 'ceph01*' data_devices: paths: - /dev/sdb - /dev/sdc - /dev/sdf - /dev/sdg db_devices: paths: - /dev/sdd - /dev/sde
위의 예에서
/dev/sdh는/dev/sde로 교체됩니다.중요동일한 호스트 사양 파일을 사용하여 단일 OSD 노드에서 결함이 있는 DB 장치를 교체하는 경우, OSD 노드만 지정하도록
host_pattern옵션을 수정하면 배포가 실패하고 다른 호스트에서 새 DB 장치를 찾을 수 없습니다.사양 파일을
--dry-run옵션으로 다시 적용하여 새 DB 장치를 사용하여 OSD를 배포해야 합니다.예제
[ceph: root@host01 /]# ceph orch apply -i osds.yml --dry-run WARNING! Dry-Runs are snapshots of a certain point in time and are bound to the current inventory setup. If any of these conditions change, the preview will be invalid. Please make sure to have a minimal timeframe between planning and applying the specs. #################### SERVICESPEC PREVIEWS #################### +---------+------+--------+-------------+ |SERVICE |NAME |ADD_TO |REMOVE_FROM | +---------+------+--------+-------------+ +---------+------+--------+-------------+ ################ OSDSPEC PREVIEWS ################ +---------+-------+-------+----------+----------+-----+ |SERVICE |NAME |HOST |DATA |DB |WAL | +---------+-------+-------+----------+----------+-----+ |osd |non-colocated |host02 |/dev/sdb |/dev/sde |- | |osd |non-colocated |host02 |/dev/sdc |/dev/sde |- | +---------+-------+-------+----------+----------+-----+
사양 파일을 적용합니다.
예제
[ceph: root@host01 /]# ceph orch apply -i osds.yml Scheduled osd.non-colocated update...
OSD가 재배포되었는지 확인합니다.
예제
[ceph: root@host01 /]# ceph osd df tree | egrep -i "ID|host02|osd.2|osd.5" ID CLASS WEIGHT REWEIGHT SIZE RAW USE DATA OMAP META AVAIL %USE VAR PGS STATUS TYPE NAME -5 0.04877 - 55 GiB 15 GiB 4.5 MiB 0 B 60 MiB 40 GiB 27.27 1.17 - host host02 2 hdd 0.01219 1.00000 15 GiB 5.0 GiB 1.1 MiB 0 B 15 MiB 10 GiB 33.33 1.43 0 up osd.2 5 hdd 0.01219 1.00000 15 GiB 5.0 GiB 1.1 MiB 0 B 15 MiB 10 GiB 33.33 1.43 0 up osd.5
검증
OSDS가 재배포되는 OSD 호스트에서 새 DB 장치에 있는지 확인합니다.
예제
[ceph: root@host01 /]# ceph-volume lvm list /dev/sde ====== osd.2 ======= [db] /dev/ceph-15ce813a-8a4c-46d9-ad99-7e0845baf15e/osd-db-1998a02e-5e67-42a9-b057-e02c22bbf461 block device /dev/ceph-a4afcb78-c804-4daf-b78f-3c7ad1ed0379/osd-block-564b3d2f-0f85-4289-899a-9f98a2641979 block uuid ITPVPa-CCQ5-BbFa-FZCn-FeYt-c5N4-ssdU41 cephx lockbox secret cluster fsid fa0bd9dc-e4c4-11ed-8db4-001a4a00046e cluster name ceph crush device class db device /dev/ceph-15ce813a-8a4c-46d9-ad99-7e0845baf15e/osd-db-1998a02e-5e67-42a9-b057-e02c22bbf461 db uuid HF1bYb-fTK7-0dcB-CHzW-xvNn-dCym-KKdU5e encrypted 0 osd fsid 564b3d2f-0f85-4289-899a-9f98a2641979 osd id 2 osdspec affinity non-colocated type db vdo 0 devices /dev/sde ====== osd.5 ======= [db] /dev/ceph-15ce813a-8a4c-46d9-ad99-7e0845baf15e/osd-db-6c154191-846d-4e63-8c57-fc4b99e182bd block device /dev/ceph-b37c8310-77f9-4163-964b-f17b4c29c537/osd-block-b42a4f1f-8e19-4416-a874-6ff5d305d97f block uuid 0LuPoz-ao7S-UL2t-BDIs-C9pl-ct8J-xh5ep4 cephx lockbox secret cluster fsid fa0bd9dc-e4c4-11ed-8db4-001a4a00046e cluster name ceph crush device class db device /dev/ceph-15ce813a-8a4c-46d9-ad99-7e0845baf15e/osd-db-6c154191-846d-4e63-8c57-fc4b99e182bd db uuid SvmXms-iWkj-MTG7-VnJj-r5Mo-Moiw-MsbqVD encrypted 0 osd fsid b42a4f1f-8e19-4416-a874-6ff5d305d97f osd id 5 osdspec affinity non-colocated type db vdo 0 devices /dev/sde
