23.6. DASDs that are not part of the root file system


Direct Access Storage Devices (DASDs) that are not part of the root file system, that is, data disks, are persistently configured in the /etc/dasd.conf file. This file contains one DASD per line, where each line begins with the DASD’s bus ID.

When adding a DASD to the /etc/dasd.conf file, use key-value pairs to specify the options for each entry. Separate the key and its value with an equal (=) sign. When adding multiple options, use a space or a tab to separate each option. For example, the /etc/dasd.conf file contains:

0.0.0207
0.0.0200 use_diag=1 readonly=1

Changes to the /etc/dasd.conf file take effect after a system reboot or after a new DASD is dynamically added by changing the system’s I/O configuration (that is, the DASD is attached under z/VM).

Alternatively, to activate a DASD that you have added to the /etc/dasd.conf file, complete the following steps:

  1. Remove the DASD from the list of ignored devices and make it visible using the cio_ignore utility:

    # cio_ignore -r device_number

    where device_number is the DASD device number.

    For example, if the device number is 021a, run:

    # cio_ignore -r 021a
  2. Activate the DASD by writing to the device’s uevent attribute:

    # echo add > /sys/bus/ccw/devices/dasd-bus-ID/uevent

    where dasd-bus-ID is the DASD’s bus ID.

    For example, if the bus ID is 0.0.021a, run:

    # echo add > /sys/bus/ccw/devices/0.0.021a/uevent
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat
맨 위로 이동