8.2. Overview of the installation process on PowerVM LPAR by using the HMC


You can install RHEL on the PowerVM logical partition (LPAR) by using the Hardware Management Console. A Hardware Management Console (HMC) is a hardware appliance that you can use to administer IBM Power Systems servers.

The installation workflow involves the following general steps:

  1. Download the RHEL installation ISO.
  2. Prepare a bootable physical installation medium based on your installation method.
  3. Verify that the Power System is added to the HMC.

    For more information, see add or remove connections to HMC in the IBM documentation.

  4. Configure VIOS and LPAR on the managed system or configure full system LPAR based on the requirements.
  5. Log in to the HMC console.

    1. Run ssh hscroot@<HMC_IP_address> to access the LPAR console by using either the mkvterm -m <managed_system_name> -p <lpar_name> command or the vtmenu interface.
    2. Power on the LPAR by using the HMC GUI.
    3. Optional: Switch to a remote desktop session.
  6. Install Red Hat Enterprise Linux.
  7. Optional: Install IBM Tools Repository to use Service and Productivity tools, IBM Advance Toolchain for Linux on Power, and IBM SDK for PowerLinux.

For detailed instructions, see Installing Linux on PowerVM LPAR by using the HMC and Service and productivity tools in the IBM documentation.

Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat
맨 위로 이동