Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

8.2.  Connecting and Disconnecting Remotely

Abstract

There are two alternative ways of connecting to a remote container. If you are already running an Red Hat JBoss Fuse command shell, you can invoke a console command to connect to the remote container. Alternatively, you can run a utility directly on the command-line to connect to the remote container.

8.2.1. Connecting to a Standalone Container from a Remote Container
링크 복사

Overview
링크 복사

Any container's command console can be used to access a remote container. Using SSH, the local container's console connects to the remote container and functions as a command console for the remote container.

Using the ssh:ssh console command
링크 복사

You connect to a remote container's console using the ssh:ssh console command.

Example 8.2. ssh:ssh Command Syntax

ssh:ssh { -l username } { -P password } { -p port } { hostname }

-l username
The username used to connect to the remote container. Use valid JAAS login credentials that have admin privileges (see Chapter 14, Configuring JAAS Security).
-P password
The password used to connect to the remote container.
-p port
The SSH port used to access the desired container's remote console.
By default this value is 8101. See the section called “Configuring a standalone container for remote access” for details on changing the port number.
hostname
The hostname of the machine that the remote container is running on. See the section called “Configuring a standalone container for remote access” for details on changing the hostname.
Warning
We recommend that you customize the username and password in the etc/users.properties file. See Chapter 14, Configuring JAAS Securityfor details.
Note
If your remote container is deployed on an Oracle VM Server for SPARC instance, it is likely that the default SSH port value, 8101, is already occupied by the Logical Domains Manager daemon. In this case, you will need to reconfigure the container's SSH port, as described in the section called “Configuring a standalone container for remote access”.

Example 8.3. Connecting to a Remote Console

JBossFuse:karaf@root>ssh:ssh -l smx -P smx -p 8108 hostname
Copy to Clipboard Toggle word wrap
To confirm that you have connected to the correct container, type shell:info at the prompt. Information about the currently connected instance is returned, as shown in Example 8.4, “Output of the shell:info Command”.

Example 8.4. Output of the shell:info Command

Karaf Karaf version 2.2.5.fuse-beta-7-052 Karaf home /Volumes/ESB/jboss-fuse-full-6.0.0.redhat-0XX Karaf base /Volumes/ESB/jboss-fuse-full-6.0.0.redhat-0XX/instances/child1 OSGi Framework org.apache.felix.framework - 4.0.3.fuse-beta-7-052 JVM Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM version 20.6-b01-415 Version 1.6.0_31 Vendor Apple Inc. Uptime 6 minutes Total compile time 24.048 seconds Threads Live threads 62 Daemon threads 43 Peak 287 Total started 313 Memory Current heap size 78,981 kbytes Maximum heap size 466,048 kbytes Committed heap size 241,920 kbytes Pending objects 0 Garbage collector Name = 'PS Scavenge', Collections = 11, Time = 0.271 seconds Garbage collector Name = 'PS MarkSweep', Collections = 1, Time = 0.117 seconds Classes Current classes loaded 5,720 Total classes loaded 5,720 Total classes unloaded 0 Operating system Name Mac OS X version 10.7.3 Architecture x86_64 Processors 2
Copy to Clipboard Toggle word wrap

Disconnecting from a remote console
링크 복사

To disconnect from a remote console, enter logout or press Ctrl+D at the prompt.
You will be disconnected from the remote container and the console will once again manage the local container.

8.2.2. Connecting to a Fabric Container From another Fabric Container
링크 복사

Overview
링크 복사

When containers are deployed into a fabric, they are all connected to each other. You can easily connect to any container's command console from any of its peers. When connecting using fabric, you do not need to know any of the location details for the container you want to connect to. The fabric's runtime registry stores all of the location details needed to establish the remote connection.

Using the fabric:container-connect command
링크 복사

In the context of a fabric, you should connect to a remote runtime's console using the fabric:container-connect command.

Example 8.5. fabric:container-connect Command Syntax

fabric:container-connect { -u username } { -p password } { containerName }

-u username
The username used to connect to the remote console. The default value is admin.
-p password
The password used to connect to the remote console. The default value is admin.
containerName
The name of the container.
Warning
We recommend that you change the default administrator username and password. See Chapter 14, Configuring JAAS Security for details.

Example 8.6. Connecting to a Remote Container

JBossFuse:karaf@root>fabric:container-connect -u admin -p admin containerName
Copy to Clipboard Toggle word wrap
To confirm that you have connected to the correct container, type shell:info at the prompt. Information about the currently connected instance is returned, as shown in Example 8.7, “Output of the shell:info Command”.

Example 8.7. Output of the shell:info Command

Karaf Karaf version 2.3.0.fuse-71-044 Karaf home /Volumes/SAMSUNG/Programs/ESB/jboss-fuse-full-6.0.0.redhat-0XX Karaf base /Volumes/SAMSUNG/Programs/ESB/jboss-fuse-full-6.0.0.redhat-0XX/instances/child1 OSGi Framework org.apache.felix.framework - 4.0.3.fuse-71-044 JVM Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM version 20.8-b03-424 Version 1.6.0_33 Vendor Apple Inc. Uptime 7 minutes Total compile time 5.336 seconds Threads Live threads 42 Daemon threads 31 Peak 96 Total started 123 Memory Current heap size 32,832 kbytes Maximum heap size 466,048 kbytes Committed heap size 104,960 kbytes Pending objects 0 Garbage collector Name = 'PS Scavenge', Collections = 7, Time = 0.063 seconds Garbage collector Name = 'PS MarkSweep', Collections = 1, Time = 0.060 seconds Classes Current classes loaded 4,019 Total classes loaded 4,019 Total classes unloaded 0 Operating system Name Mac OS X version 10.7.4 Architecture x86_64 Processors 2
Copy to Clipboard Toggle word wrap

Disconnecting from a remote console
링크 복사

To disconnect from a remote console, enter logout or press Ctrl+D at the prompt.
You will be disconnected from the remote container and the console will once again manage the local container.

8.2.3. Connecting to a Container Using the Client Command-Line Utility
링크 복사

Using the remote client
링크 복사

The remote client allows you to securely connect to a remote Red Hat JBoss Fuse container without having to launch a full JBoss Fuse container locally.
For example, to quickly connect to a JBoss Fuse instance running in server mode on the same machine, open a command prompt and run the client[.bat] script (which is located in the InstallDir/bin directory), as follows: 
client
Copy to Clipboard Toggle word wrap
More usually, you would provide a hostname, port, username, and password to connect to a remote instance. If you were using the client within a larger script, for example in a test suite, you could append console commands as follows: 
client -a 8101 -h hostname -u username -p password shell:info
Copy to Clipboard Toggle word wrap
Alternatively, if you omit the -p option, you will be prompted to enter a password.
For a standalone container, use any valid JAAS user credentials that have admin privileges.
For a container in a fabric, the default username and password is admin and admin.
To display the available options for the client, type: 
client --help
Copy to Clipboard Toggle word wrap

Example 8.8. Karaf Client Help

Apache Felix Karaf client -a [port] specify the port to connect to -h [host] specify the host to connect to -u [user] specify the user name -p [password] specify the password --help shows this help message -v raise verbosity -r [attempts] retry connection establishment (up to attempts times) -d [delay] intra-retry delay (defaults to 2 seconds) [commands] commands to run If no commands are specified, the client will be put in an interactive mode
Copy to Clipboard Toggle word wrap

Disconnecting from a remote client console
링크 복사

If you used the remote client to open a remote console, as opposed to using it to pass a command, you will need to disconnect from it. To disconnect from the remote client's console, enter logout or press Ctrl+D at the prompt.
The client will disconnect and exit.

8.2.4. Connecting to a Container Using the SSH Command-Line Utility
링크 복사

Overview
링크 복사

You can also use the ssh command-line utility (a standard utility on UNIX-like operating systems) to log in to the Red Hat JBoss Fuse container, where the authentication mechanism is based on public key encryption (the public key must first be installed in the container). For example, given that the container is configured to listen on TCP port 8101, you could log in as follows: 
ssh -p 8101 jdoe@localhost
Copy to Clipboard Toggle word wrap
Important
Key-based login is currently supported only on standalone containers, not on Fabric containers.

Prerequisites
링크 복사

To use key-based SSH login, the following prerequisites must be satisfied:

Default key location
링크 복사

The ssh command automatically looks for the private key in the default key location. It is recommended that you install your key in the default location, because it saves you the trouble of specifying the location explicitly.
On a *NIX operating system, the default locations for an RSA key pair are: 
~/.ssh/id_rsa
~/.ssh/id_rsa.pub
Copy to Clipboard Toggle word wrap
On a Windows operating system, the default locations for an RSA key pair are: 
C:\Documents and Settings\Username\.ssh\id_rsa
C:\Documents and Settings\Username\.ssh\id_rsa.pub
Copy to Clipboard Toggle word wrap
Note
Red Hat JBoss Fuse supports only RSA keys. DSA keys do not work.

Creating a new SSH key pair
링크 복사

Generate an RSA key pair using the ssh-keygen utility. Open a new command prompt and enter the following command: 
ssh-keygen -t rsa -b 2048
Copy to Clipboard Toggle word wrap
The preceding command generates an RSA key with a key length of 2048 bits. You will then be prompted to specify the file name for the key pair: 
Generating public/private rsa key pair.
Enter file in which to save the key (/Users/Username/.ssh/id_rsa):
Copy to Clipboard Toggle word wrap
Type return to save the key pair in the default location. You will then be prompted for a pass phrase: 
Enter passphrase (empty for no passphrase):
Copy to Clipboard Toggle word wrap
You can optionally enter a pass phrase here or type return twice to select no pass phrase.
Note
If you want to use the same key pair for running Fabric console commands, it is recommended that you select no pass phrase, because Fabric does not support using encrypted private keys.

Installing the SSH public key in the container
링크 복사

To use the SSH key pair for logging into the Red Hat JBoss Fuse container, you must install the SSH public key in the container by creating a new user entry in the InstallDir/etc/keys.properties file. Each user entry in this file appears on a single line, in the following format: 
Username=PublicKey,Role1,Role2,...
Copy to Clipboard Toggle word wrap
For example, given that your public key file, ~/.ssh/id_rsa.pub, has the following contents: 
ssh-rsa AAAAB3NzaC1kc3MAAACBAP1/U4EddRIpUt9KnC7s5Of2EbdSPO9EAMMeP4C2USZpRV1AIlH7WT2NWPq/xfW6MPbLm1Vs14E7
gB00b/JmYLdrmVClpJ+f6AR7ECLCT7up1/63xhv4O1fnfqimFQ8E+4P208UewwI1VBNaFpEy9nXzrith1yrv8iIDGZ3RSAHHAAAAFQCX
YFCPFSMLzLKSuYKi64QL8Fgc9QAAAnEA9+GghdabPd7LvKtcNrhXuXmUr7v6OuqC+VdMCz0HgmdRWVeOutRZT+ZxBxCBgLRJFnEj6Ewo
FhO3zwkyjMim4TwWeotifI0o4KOuHiuzpnWRbqN/C/ohNWLx+2J6ASQ7zKTxvqhRkImog9/hWuWfBpKLZl6Ae1UlZAFMO/7PSSoAAACB
AKKSU2PFl/qOLxIwmBZPPIcJshVe7bVUpFvyl3BbJDow8rXfskl8wO63OzP/qLmcJM0+JbcRU/53Jj7uyk31drV2qxhIOsLDC9dGCWj4
7Y7TyhPdXh/0dthTRBy6bqGtRPxGa7gJov1xm/UuYYXPIUR/3x9MAZvZ5xvE0kYXO+rx jdoe@doemachine.local
Copy to Clipboard Toggle word wrap
You can create the jdoe user with the admin role by adding the following entry to the InstallDir/etc/keys.properties file (on a single line): 
jdoe=AAAAB3NzaC1kc3MAAACBAP1/U4EddRIpUt9KnC7s5Of2EbdSPO9EAMMeP4C2USZpRV1AIlH7WT2NWPq/xfW6MPbLm1Vs14E7
gB00b/JmYLdrmVClpJ+f6AR7ECLCT7up1/63xhv4O1fnfqimFQ8E+4P208UewwI1VBNaFpEy9nXzrith1yrv8iIDGZ3RSAHHAAAAFQCX
YFCPFSMLzLKSuYKi64QL8Fgc9QAAAnEA9+GghdabPd7LvKtcNrhXuXmUr7v6OuqC+VdMCz0HgmdRWVeOutRZT+ZxBxCBgLRJFnEj6Ewo
FhO3zwkyjMim4TwWeotifI0o4KOuHiuzpnWRbqN/C/ohNWLx+2J6ASQ7zKTxvqhRkImog9/hWuWfBpKLZl6Ae1UlZAFMO/7PSSoAAACB
AKKSU2PFl/qOLxIwmBZPPIcJshVe7bVUpFvyl3BbJDow8rXfskl8wO63OzP/qLmcJM0+JbcRU/53Jj7uyk31drV2qxhIOsLDC9dGCWj4
7Y7TyhPdXh/0dthTRBy6bqGtRPxGa7gJov1xm/UuYYXPIUR/3x9MAZvZ5xvE0kYXO+rx,admin
Copy to Clipboard Toggle word wrap
Important
Do not insert the entire contents of the id_rsa.pub file here. Insert just the block of symbols which represents the public key itself.

Checking that public key authentication is supported
링크 복사

After starting the container, you can check whether public key authentication is supported by running the jaas:realms console command, as follows: 
Index Realm                Module Class                                                                    
    1 karaf                org.apache.karaf.jaas.modules.properties.PropertiesLoginModule                  
    2 karaf                org.apache.karaf.jaas.modules.publickey.PublickeyLoginModule
Copy to Clipboard Toggle word wrap
You should see that the PublickeyLoginModule is installed. With this configuration you can log in to the container using either username/password credentials or public key credentials.

Logging in using key-based SSH
링크 복사

You are now ready to login to the container using the key-based SSH utility. For example: 
$ ssh -p 8101 jdoe@localhost
      _ ____                  ______
     | |  _ \                |  ____|             
     | | |_) | ___  ___ ___  | |__ _   _ ___  ___
 _   | |  _   / _ \/ __/ __| |  __| | | / __|/ _ \
| |__| | |_) | (_) \__ \__ \ | |  | |_| \__ \  __/
 \____/|____/ \___/|___/___/ |_|   \__,_|___/\___|


  JBoss Fuse (6.2.1.redhat-084)
  http://www.redhat.com/products/jbossenterprisemiddleware/fuse/

Hit '<tab>' for a list of available commands
and '[cmd] --help' for help on a specific command.
Hit '<ctrl-d>' or 'osgi:shutdown' to shutdown JBoss Fuse.

JBossFuse:karaf@root>
Copy to Clipboard Toggle word wrap
Note
If you are using an encrypted private key, the ssh utility will prompt you to enter the pass phrase.
맨 위로 이동
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2025 Red Hat