Red Hat Summit Red Hat Summit지원콘솔개발자평가판 시작연락처

이 콘텐츠는 선택한 언어로 제공되지 않습니다.

Chapter 7. Accessing Data - Setting Up Clients

Red Hat Storage volumes can be accessed using a number of technologies:
Cross Protocol Data Access

Although a Red Hat Storage trusted pool can be configured to support multiple protocols simultaneously, a single volume cannot be freely accessed by different protocols due to differences in locking semantics. The table below defines which protocols can safely access the same volume concurrently.

Expand
Table 7.1. Cross Protocol Data Access Matrix
  SMB NFS Native Client Object
SMB Yes No No No
NFS No Yes Yes Yes
Native Client No Yes Yes Yes
Object No Yes Yes Yes

7.1. Securing Red Hat Storage Client Access
링크 복사

Red Hat Storage Server uses the listed ports. Ensure that firewall settings do not prevent access to these ports.
Expand
Table 7.2. TCP Port Numbers
Port Number Usage
22 For sshd used by geo-replication.
111 For rpc port mapper.
139 For netbios service.
445 For CIFS protocol.
965 For NLM.
2049 For glusterFS's NFS exports (nfsd process).
24007 For glusterd (for management).
24008 For glusterd (RDMA port for management)
24009 - 24108 For client communication with Red Hat Storage 2.0.
38465 For NFS mount protocol.
38466 For NFS mount protocol.
38468 For NFS's Lock Manager (NLM).
38469 For NFS's ACL support.
39543 For oVirt (Red Hat Storage-Console).
49152 - 49251 For client communication with Red Hat Storage 2.1 and for brick processes depending on the availability of the ports. The total number of ports required to be open depends on the total number of bricks exported on the machine.
55863 For oVirt (Red Hat Storage-Console).
Expand
Table 7.3. TCP Port Numbers used for Object Storage (Swift)
Port Number Usage
443 For HTTPS request.
6010 For Object Server.
6011 For Container Server.
6012 For Account Server.
8080 For Proxy Server.
Expand
Table 7.4. TCP Port Numbers for Nagios Monitoring
Port Number Usage
80 For HTTP protocol (required only if Nagios server is running on a Red Hat Storage node).
443 For HTTPS protocol (required only for Nagios server).
5667 For NSCA service (required only if Nagios server is running on a Red Hat Storage node).
5666 For NRPE service (required in all Red Hat Storage nodes).
Expand
Table 7.5. UDP Port Numbers
Port Number Usage
111 For RPC Bind.
963 For NFS's Lock Manager (NLM).
Red Hat logoGithubredditYoutubeTwitter

자세한 정보

평가판, 구매 및 판매

커뮤니티

Red Hat 문서 정보

Red Hat을 사용하는 고객은 신뢰할 수 있는 콘텐츠가 포함된 제품과 서비스를 통해 혁신하고 목표를 달성할 수 있습니다. 최신 업데이트를 확인하세요.

보다 포괄적 수용을 위한 오픈 소스 용어 교체

Red Hat은 코드, 문서, 웹 속성에서 문제가 있는 언어를 교체하기 위해 최선을 다하고 있습니다. 자세한 내용은 다음을 참조하세요.Red Hat 블로그.

Red Hat 소개

Red Hat은 기업이 핵심 데이터 센터에서 네트워크 에지에 이르기까지 플랫폼과 환경 전반에서 더 쉽게 작업할 수 있도록 강화된 솔루션을 제공합니다.

Theme

© 2026 Red Hat맨 위로 이동