이 콘텐츠는 선택한 언어로 제공되지 않습니다.
Chapter 49. loadbalancer
This chapter describes the commands under the loadbalancer
command.
49.1. loadbalancer amphora configure 링크 복사링크가 클립보드에 복사되었습니다!
Update the amphora agent configuration
Usage:
openstack loadbalancer amphora configure [-h] <amphora-id>
openstack loadbalancer amphora configure [-h] <amphora-id>
Value | Summary |
---|---|
<amphora-id> | Uuid of the amphora to configure. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.2. loadbalancer amphora failover 링크 복사링크가 클립보드에 복사되었습니다!
Force failover an amphora
Usage:
openstack loadbalancer amphora failover [-h] <amphora-id>
openstack loadbalancer amphora failover [-h] <amphora-id>
Value | Summary |
---|---|
<amphora-id> | Uuid of the amphora. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.3. loadbalancer amphora list 링크 복사링크가 클립보드에 복사되었습니다!
List amphorae
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--loadbalancer <loadbalancer> | Filter by load balancer (name or id). |
--compute-id <compute-id> | Filter by compute id. |
--role {BACKUP,MASTER,STANDALONE} | Filter by role. |
--status {ALLOCATED,BOOTING,DELETED,ERROR,PENDING_CREATE,PENDING_DELETE,READY}, --provisioning-status {ALLOCATED,BOOTING,DELETED,ERROR,PENDING_CREATE,PENDING_DELETE,READY} | Filter by amphora provisioning status. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.4. loadbalancer amphora show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single amphora
Usage:
Value | Summary |
---|---|
<amphora-id> | Uuid of the amphora. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.5. loadbalancer create 링크 복사링크가 클립보드에 복사되었습니다!
Create a load balancer
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | New load balancer name. |
--description <description> | Set load balancer description. |
--vip-address <vip_address> | Set the vip ip address. |
--vip-qos-policy-id <vip_qos_policy_id> | Set qos policy id for vip port. unset with none. |
--project <project> | Project for the load balancer (name or id). |
--provider <provider> | Provider name for the load balancer. |
--enable | Enable load balancer (default). |
--disable | Disable load balancer. |
--flavor <flavor> | The name or id of the flavor for the load balancer. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
At least one of the following arguments is required.--vip-port-id <vip_port_id> | Set port for the load balancer (name or id). |
--vip-subnet-id <vip_subnet_id> | Set subnet for the load balancer (name or id). |
--vip-network-id <vip_network_id> | Set network for the load balancer (name or id). |
49.6. loadbalancer delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a load balancer
Usage:
openstack loadbalancer delete [-h] [--cascade] <load_balancer>
openstack loadbalancer delete [-h] [--cascade] <load_balancer>
Value | Summary |
---|---|
<load_balancer> | Load balancers to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--cascade | Cascade the delete to all child elements of the load balancer. |
49.7. loadbalancer failover 링크 복사링크가 클립보드에 복사되었습니다!
Trigger load balancer failover
Usage:
openstack loadbalancer failover [-h] <load_balancer>
openstack loadbalancer failover [-h] <load_balancer>
Value | Summary |
---|---|
<load_balancer> | Name or uuid of the load balancer. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.8. loadbalancer flavor create 링크 복사링크가 클립보드에 복사되었습니다!
Create a octavia flavor
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | New flavor name. |
--flavorprofile <flavor_profile> | Flavor profile to add the flavor to (name or id). |
--description <description> | Set flavor description. |
--enable | Enable flavor. |
--disable | Disable flavor. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.9. loadbalancer flavor delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a flavor
Usage:
openstack loadbalancer flavor delete [-h] <flavor>
openstack loadbalancer flavor delete [-h] <flavor>
Value | Summary |
---|---|
<flavor> | Flavor to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.10. loadbalancer flavor list 링크 복사링크가 클립보드에 복사되었습니다!
List flavor
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | List flavors according to their name. |
--flavorprofile <flavor_profile> | List flavors according to their flavor profile. |
--enable | List enabled flavors. |
--disable | List disabled flavors. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.11. loadbalancer flavor set 링크 복사링크가 클립보드에 복사되었습니다!
Update a flavor
Usage:
openstack loadbalancer flavor set [-h] [--name <name>] [--enable | --disable] <flavor>
openstack loadbalancer flavor set [-h] [--name <name>]
[--enable | --disable]
<flavor>
Value | Summary |
---|---|
<flavor> | Name or uuid of the flavor to update. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the name of the flavor. |
--enable | Enable flavor. |
--disable | Disable flavor. |
49.12. loadbalancer flavor show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details for a single flavor
Usage:
Value | Summary |
---|---|
<flavor> | Name or uuid of the flavor. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.13. loadbalancer flavorprofile create 링크 복사링크가 클립보드에 복사되었습니다!
Create a octavia flavor profile
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | New octavia flavor profile name. |
--provider <provider name> | Provider name for the flavor profile. |
--flavor-data <flavor_data> | The json string containing the flavor metadata. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.14. loadbalancer flavorprofile delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a flavor profile
Usage:
openstack loadbalancer flavorprofile delete [-h] <flavor_profile>
openstack loadbalancer flavorprofile delete [-h] <flavor_profile>
Value | Summary |
---|---|
<flavor_profile> | Flavor profiles to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.15. loadbalancer flavorprofile list 링크 복사링크가 클립보드에 복사되었습니다!
List flavor profile
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | List flavor profiles by flavor profile name. |
--provider <provider_name> | List flavor profiles according to their provider. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.16. loadbalancer flavorprofile set 링크 복사링크가 클립보드에 복사되었습니다!
Update a flavor profile
Usage:
openstack loadbalancer flavorprofile set [-h] [--name <name>] [--provider <provider_name>] [--flavor-data <flavor_data>] <flavor_profile>
openstack loadbalancer flavorprofile set [-h] [--name <name>]
[--provider <provider_name>]
[--flavor-data <flavor_data>]
<flavor_profile>
Value | Summary |
---|---|
<flavor_profile> | Name or uuid of the flavor profile to update. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the name of the flavor profile. |
--provider <provider_name> | Set the provider of the flavor profile. |
--flavor-data <flavor_data> | Set the flavor data of the flavor profile. |
49.17. loadbalancer flavorprofile show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details for a single flavor profile
Usage:
Value | Summary |
---|---|
<flavor_profile> | Name or uuid of the flavor profile to show. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.18. loadbalancer healthmonitor create 링크 복사링크가 클립보드에 복사되었습니다!
Create a health monitor
Usage:
Value | Summary |
---|---|
<pool> | Set the pool for the health monitor (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the health monitor name. |
--delay <delay> | Set the time in seconds, between sending probes to members. |
--domain-name <domain_name> | Set the domain name, which be injected into the http Host Header to the backend server for HTTP health check. |
--expected-codes <codes> | Set the list of http status codes expected in response from the member to declare it healthy. |
--http-method {GET,POST,DELETE,PUT,HEAD,OPTIONS,PATCH,CONNECT,TRACE} | Set the http method that the health monitor uses for requests. |
--http-version <http_version> | Set the http version. |
--timeout <timeout> | Set the maximum time, in seconds, that a monitor waits to connect before it times out. This value must be less than the delay value. |
--max-retries <max_retries> | The number of successful checks before changing the operating status of the member to ONLINE. |
--url-path <url_path> | Set the http url path of the request sent by the monitor to test the health of a backend member. |
--type {PING,HTTP,TCP,HTTPS,TLS-HELLO,UDP-CONNECT} | Set the health monitor type. |
--max-retries-down <max_retries_down> | Set the number of allowed check failures before changing the operating status of the member to ERROR. |
--enable | Enable health monitor (default). |
--disable | Disable health monitor. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.19. loadbalancer healthmonitor delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a health monitor
Usage:
openstack loadbalancer healthmonitor delete [-h] <health_monitor>
openstack loadbalancer healthmonitor delete [-h] <health_monitor>
Value | Summary |
---|---|
<health_monitor> | Health monitor to delete (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.20. loadbalancer healthmonitor list 링크 복사링크가 클립보드에 복사되었습니다!
List health monitors
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.21. loadbalancer healthmonitor set 링크 복사링크가 클립보드에 복사되었습니다!
Update a health monitor
Usage:
Value | Summary |
---|---|
<health_monitor> | Health monitor to update (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set health monitor name. |
--delay <delay> | Set the time in seconds, between sending probes to members. |
--domain-name <domain_name> | Set the domain name, which be injected into the http Host Header to the backend server for HTTP health check. |
--expected-codes <codes> | Set the list of http status codes expected in response from the member to declare it healthy. |
--http-method {GET,POST,DELETE,PUT,HEAD,OPTIONS,PATCH,CONNECT,TRACE} | Set the http method that the health monitor uses for requests. |
--http-version <http_version> | Set the http version. |
--timeout <timeout> | Set the maximum time, in seconds, that a monitor waits to connect before it times out. This value must be less than the delay value. |
--max-retries <max_retries> | Set the number of successful checks before changing the operating status of the member to ONLINE. |
--max-retries-down <max_retries_down> | Set the number of allowed check failures before changing the operating status of the member to ERROR. |
--url-path <url_path> | Set the http url path of the request sent by the monitor to test the health of a backend member. |
--enable | Enable health monitor. |
--disable | Disable health monitor. |
49.22. loadbalancer healthmonitor show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single health monitor
Usage:
Value | Summary |
---|---|
<health_monitor> | Name or uuid of the health monitor. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.23. loadbalancer l7policy create 링크 복사링크가 클립보드에 복사되었습니다!
Create a l7policy
Usage:
Value | Summary |
---|---|
<listener> | Listener to add l7policy to (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the l7policy name. |
--description <description> | Set l7policy description. |
--action {REDIRECT_TO_URL,REDIRECT_TO_POOL,REDIRECT_PREFIX,REJECT} | Set the action of the policy. |
--redirect-pool <pool> | Set the pool to redirect requests to (name or id). |
--redirect-url <url> | Set the url to redirect requests to. |
--redirect-prefix <url> | Set the url prefix to redirect requests to. |
--redirect-http-code <redirect_http_code> | Set the http response code for redirect_url orREDIRECT_PREFIX action. |
--position <position> | Sequence number of this l7 policy. |
--enable | Enable l7policy (default). |
--disable | Disable l7policy. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.24. loadbalancer l7policy delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a l7policy
Usage:
openstack loadbalancer l7policy delete [-h] <policy>
openstack loadbalancer l7policy delete [-h] <policy>
Value | Summary |
---|---|
<policy> | L7policy to delete (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.25. loadbalancer l7policy list 링크 복사링크가 클립보드에 복사되었습니다!
List l7policies
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.26. loadbalancer l7policy set 링크 복사링크가 클립보드에 복사되었습니다!
Update a l7policy
Usage:
Value | Summary |
---|---|
<policy> | L7policy to update (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set l7policy name. |
--description <description> | Set l7policy description. |
--action {REDIRECT_TO_URL,REDIRECT_TO_POOL,REDIRECT_PREFIX,REJECT} | Set the action of the policy. |
--redirect-pool <pool> | Set the pool to redirect requests to (name or id). |
--redirect-url <url> | Set the url to redirect requests to. |
--redirect-prefix <url> | Set the url prefix to redirect requests to. |
--redirect-http-code <redirect_http_code> | Set the http response code for redirect_url orREDIRECT_PREFIX action. |
--position <position> | Set sequence number of this l7 policy. |
--enable | Enable l7policy. |
--disable | Disable l7policy. |
49.27. loadbalancer l7policy show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single l7policy
Usage:
Value | Summary |
---|---|
<policy> | Name or uuid of the l7policy. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.28. loadbalancer l7rule create 링크 복사링크가 클립보드에 복사되었습니다!
Create a l7rule
Usage:
Value | Summary |
---|---|
<l7policy> | L7policy to add l7rule to (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--compare-type {REGEX,EQUAL_TO,CONTAINS,ENDS_WITH,STARTS_WITH} | Set the compare type for the l7rule. |
--invert | Invert l7rule. |
--value <value> | Set the rule value to match on. |
--key <key> | Set the key for the l7rule’s value to match on. |
--type {FILE_TYPE,PATH,COOKIE,HOST_NAME,HEADER,SSL_CONN_HAS_CERT,SSL_VERIFY_RESULT,SSL_DN_FIELD} | Set the type for the l7rule. |
--enable | Enable l7rule (default). |
--disable | Disable l7rule. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.29. loadbalancer l7rule delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a l7rule
Usage:
openstack loadbalancer l7rule delete [-h] <l7policy> <rule_id>
openstack loadbalancer l7rule delete [-h] <l7policy> <rule_id>
Value | Summary |
---|---|
<l7policy> | L7policy to delete rule from (name or id). |
<rule_id> | L7rule to delete. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.30. loadbalancer l7rule list 링크 복사링크가 클립보드에 복사되었습니다!
List l7rules for l7policy
Usage:
Value | Summary |
---|---|
<l7policy> | L7policy to list rules for (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.31. loadbalancer l7rule set 링크 복사링크가 클립보드에 복사되었습니다!
Update a l7rule
Usage:
Value | Summary |
---|---|
<l7policy> | L7policy to update l7rule on (name or id). |
<l7rule_id> | L7rule to update. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--compare-type {REGEX,EQUAL_TO,CONTAINS,ENDS_WITH,STARTS_WITH} | Set the compare type for the l7rule. |
--invert | Invert l7rule. |
--value <value> | Set the rule value to match on. |
--key <key> | Set the key for the l7rule’s value to match on. |
--type {FILE_TYPE,PATH,COOKIE,HOST_NAME,HEADER,SSL_CONN_HAS_CERT,SSL_VERIFY_RESULT,SSL_DN_FIELD} | Set the type for the l7rule. |
--enable | Enable l7rule. |
--disable | Disable l7rule. |
49.32. loadbalancer l7rule show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single l7rule
Usage:
Value | Summary |
---|---|
<l7policy> | L7policy to show rule from (name or id). |
<l7rule_id> | L7rule to show. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.33. loadbalancer list 링크 복사링크가 클립보드에 복사되었습니다!
List load balancers
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | List load balancers according to their name. |
--enable | List enabled load balancers. |
--disable | List disabled load balancers. |
--project <project-id> | List load balancers according to their project (name or ID). |
--vip-network-id <vip_network_id> | List load balancers according to their vip network (name or ID). |
--vip-subnet-id <vip_subnet_id> | List load balancers according to their vip subnet (name or ID). |
--vip-qos-policy-id <vip_qos_policy_id> | List load balancers according to their vip qos policy (name or ID). |
--vip-port-id <vip_port_id> | List load balancers according to their vip port (name or ID). |
--provisioning-status {ACTIVE,DELETED,ERROR,PENDING_CREATE,PENDING_UPDATE,PENDING_DELETE} | List load balancers according to their provisioning status. |
--operating-status {ONLINE,DRAINING,OFFLINE,DEGRADED,ERROR,NO_MONITOR} | List load balancers according to their operating status. |
--provider <provider> | List load balancers according to their provider. |
--flavor <flavor> | List load balancers according to their flavor. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.34. loadbalancer listener create 링크 복사링크가 클립보드에 복사되었습니다!
Create a listener
Usage:
Value | Summary |
---|---|
<loadbalancer> | Load balancer for the listener (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the listener name. |
--description <description> | Set the description of this listener. |
--protocol {TCP,HTTP,HTTPS,TERMINATED_HTTPS,UDP} | The protocol for the listener. |
--connection-limit <limit> | Set the maximum number of connections permitted for this listener. |
--default-pool <pool> | Set the name or id of the pool used by the listener if no L7 policies match. |
--default-tls-container-ref <container_ref> | The uri to the key manager service secrets container containing the certificate and key for TERMINATED_TLS listeners. |
--sni-container-refs [<container_ref> [<container_ref> …]] | A list of uris to the key manager service secrets containers containing the certificates and keys for TERMINATED_TLS the listener using Server Name Indication. |
--insert-headers <header=value,…> | A dictionary of optional headers to insert into the request before it is sent to the backend member. |
--protocol-port <port> | Set the protocol port number for the listener. |
--timeout-client-data <timeout> | Frontend client inactivity timeout in milliseconds. Default: 50000. |
--timeout-member-connect <timeout> | Backend member connection timeout in milliseconds. Default: 5000. |
--timeout-member-data <timeout> | Backend member inactivity timeout in milliseconds. Default: 50000. |
--timeout-tcp-inspect <timeout> | Time, in milliseconds, to wait for additional tcp packets for content inspection. Default: 0. |
--enable | Enable listener (default). |
--disable | Disable listener. |
--client-ca-tls-container-ref <container_ref> | The uri to the key manager service secrets container containing the CA certificate for TERMINATED_TLS listeners. |
--client-authentication {NONE,OPTIONAL,MANDATORY} | The tls client authentication verify options for TERMINATED_TLS listeners. |
--client-crl-container-ref <client_crl_container_ref> | The uri to the key manager service secrets container containting the CA revocation list file for TERMINATED_TLS listeners. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.35. loadbalancer listener delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a listener
Usage:
openstack loadbalancer listener delete [-h] <listener>
openstack loadbalancer listener delete [-h] <listener>
Value | Summary |
---|---|
<listener> | Listener to delete (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.36. loadbalancer listener list 링크 복사링크가 클립보드에 복사되었습니다!
List listeners
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | List listeners by listener name. |
--loadbalancer <loadbalancer> | Filter by load balancer (name or id). |
--enable | List enabled listeners. |
--disable | List disabled listeners. |
--project <project> | List listeners by project id. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.37. loadbalancer listener set 링크 복사링크가 클립보드에 복사되었습니다!
Update a listener
Usage:
Value | Summary |
---|---|
<listener> | Listener to modify (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the listener name. |
--description <description> | Set the description of this listener. |
--connection-limit <limit> | The maximum number of connections permitted for this listener. Default value is -1 which represents infinite connections. |
--default-pool <pool> | The id of the pool used by the listener if no l7 policies match. |
--default-tls-container-ref <container-ref> | The uri to the key manager service secrets container containing the certificate and key for TERMINATED_TLSlisteners. |
--sni-container-refs [<container-ref> [<container-ref> …]] | A list of uris to the key manager service secrets containers containing the certificates and keys for TERMINATED_TLS the listener using Server Name Indication. |
--insert-headers <header=value> | A dictionary of optional headers to insert into the request before it is sent to the backend member. |
--timeout-client-data <timeout> | Frontend client inactivity timeout in milliseconds. Default: 50000. |
--timeout-member-connect <timeout> | Backend member connection timeout in milliseconds. Default: 5000. |
--timeout-member-data <timeout> | Backend member inactivity timeout in milliseconds. Default: 50000. |
--timeout-tcp-inspect <timeout> | Time, in milliseconds, to wait for additional tcp packets for content inspection. Default: 0. |
--enable | Enable listener. |
--disable | Disable listener. |
--client-ca-tls-container-ref <container_ref> | The uri to the key manager service secrets container containing the CA certificate for TERMINATED_TLS listeners. |
--client-authentication {NONE,OPTIONAL,MANDATORY} | The tls client authentication verify options for TERMINATED_TLS listeners. |
--client-crl-container-ref <client_crl_container_ref> | The uri to the key manager service secrets container containting the CA revocation list file for TERMINATED_TLS listeners. |
49.38. loadbalancer listener show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single listener
Usage:
Value | Summary |
---|---|
<listener> | Name or uuid of the listener |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.39. loadbalancer listener stats show 링크 복사링크가 클립보드에 복사되었습니다!
Shows the current statistics for a listener.
Usage:
Value | Summary |
---|---|
<listener> | Name or uuid of the listener |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.40. loadbalancer member create 링크 복사링크가 클립보드에 복사되었습니다!
Creating a member in a pool
Usage:
Value | Summary |
---|---|
<pool> | Id or name of the pool to create the member for. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Name of the member. |
--disable-backup | Disable member backup (default) |
--enable-backup | Enable member backup |
--weight <weight> | The weight of a member determines the portion of requests or connections it services compared to the other members of the pool. |
--address <ip_address> | The ip address of the backend member server |
--subnet-id <subnet_id> | The subnet id the member service is accessible from. |
--protocol-port <protocol_port> | The protocol port number the backend member server is listening on. |
--monitor-port <monitor_port> | An alternate protocol port used for health monitoring a backend member. |
--monitor-address <monitor_address> | An alternate ip address used for health monitoring a backend member. |
--enable | Enable member (default) |
--disable | Disable member |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.41. loadbalancer member delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a member from a pool
Usage:
openstack loadbalancer member delete [-h] <pool> <member>
openstack loadbalancer member delete [-h] <pool> <member>
Value | Summary |
---|---|
<pool> | Pool name or id to delete the member from. |
<member> | Name or id of the member to be deleted. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.42. loadbalancer member list 링크 복사링크가 클립보드에 복사되었습니다!
List members in a pool
Usage:
Value | Summary |
---|---|
<pool> | Pool name or id to list the members of. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.43. loadbalancer member set 링크 복사링크가 클립보드에 복사되었습니다!
Update a member
Usage:
Value | Summary |
---|---|
<pool> | Pool that the member to update belongs to (name or ID). |
<member> | Name or id of the member to update |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the name of the member |
--disable-backup | Disable member backup (default) |
--enable-backup | Enable member backup |
--weight <weight> | Set the weight of member in the pool |
--monitor-port <monitor_port> | An alternate protocol port used for health monitoring a backend member |
--monitor-address <monitor_address> | An alternate ip address used for health monitoring a backend member. |
--enable | Set the admin_state_up to true |
--disable | Set the admin_state_up to false |
49.44. loadbalancer member show 링크 복사링크가 클립보드에 복사되었습니다!
Shows details of a single Member
Usage:
Value | Summary |
---|---|
<pool> | Pool name or id to show the members of. |
<member> | Name or id of the member to show. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.45. loadbalancer pool create 링크 복사링크가 클립보드에 복사되었습니다!
Create a pool
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set pool name. |
--description <description> | Set pool description. |
--protocol {TCP,HTTP,HTTPS,TERMINATED_HTTPS,PROXY,UDP} | Set the pool protocol. |
--listener <listener> | Listener to add the pool to (name or id). |
--loadbalancer <load_balancer> | Load balncer to add the pool to (name or id) |
--session-persistence <session persistence> | Set the session persistence for the listener (key=value). |
--lb-algorithm {SOURCE_IP,ROUND_ROBIN,LEAST_CONNECTIONS} | Load balancing algorithm to use. |
--enable | Enable pool (default). |
--disable | Disable pool. |
--tls-container-ref <container-ref> | The reference to the key manager service secrets container containing the certificate and key for ``tls_enabled``pools to re-encrpt the traffic to backend member servers. |
--ca-tls-container-ref <ca_tls_container_ref> | The reference to the key manager service secrets container containing the CA certificate for ``tls_enabled`` pools to check the backend member servers certificates |
--crl-container-ref <crl_container_ref> | The reference to the key manager service secrets container containting the CA revocation list file for ``tls_enabled`` pools to validate the backend member servers certificates. |
--enable-tls | Enable backend member re-encryption. |
--disable-tls | Disable backend member re-encryption. |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.46. loadbalancer pool delete 링크 복사링크가 클립보드에 복사되었습니다!
Delete a pool
Usage:
openstack loadbalancer pool delete [-h] <pool>
openstack loadbalancer pool delete [-h] <pool>
Value | Summary |
---|---|
<pool> | Pool to delete (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.47. loadbalancer pool list 링크 복사링크가 클립보드에 복사되었습니다!
List pools
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--loadbalancer <loadbalancer> | Filter by load balancer (name or id). |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.48. loadbalancer pool set 링크 복사링크가 클립보드에 복사되었습니다!
Update a pool
Usage:
Value | Summary |
---|---|
<pool> | Pool to update (name or id). |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set the name of the pool. |
--description <description> | Set the description of the pool. |
--session-persistence <session_persistence> | Set the session persistence for the listener (key=value). |
--lb-algorithm {SOURCE_IP,ROUND_ROBIN,LEAST_CONNECTIONS} | Set the load balancing algorithm to use. |
--enable | Enable pool. |
--disable | Disable pool. |
--tls-container-ref <container-ref> | The uri to the key manager service secrets container containing the certificate and key for TERMINATED_TLS pools to re-encrpt the traffic from TERMINATED_TLS listener to backend servers. |
--ca-tls-container-ref <ca_tls_container_ref> | The uri to the key manager service secrets container containing the CA certificate for TERMINATED_TLS listeners to check the backend servers certificates in ssl traffic. |
--crl-container-ref <crl_container_ref> | The uri to the key manager service secrets container containting the CA revocation list file for TERMINATED_TLS listeners to valid the backend servers certificates in ssl traffic. |
--enable-tls | Enable backend associated members re-encryption. |
--disable-tls | Disable backend associated members re-encryption. |
49.49. loadbalancer pool show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details of a single pool
Usage:
Value | Summary |
---|---|
<pool> | Name or uuid of the pool. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.50. loadbalancer provider capability list 링크 복사링크가 클립보드에 복사되었습니다!
List specified provider driver’s flavor capabilicies.
Usage:
Value | Summary |
---|---|
<provider_name> | Name of the provider driver. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.51. loadbalancer provider list 링크 복사링크가 클립보드에 복사되었습니다!
List all providers
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.52. loadbalancer quota defaults show 링크 복사링크가 클립보드에 복사되었습니다!
Show quota defaults
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.53. loadbalancer quota list 링크 복사링크가 클립보드에 복사되었습니다!
List quotas
Usage:
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--project <project-id> | Name or uuid of the project. |
Value | Summary |
---|---|
output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
--sort-column SORT_COLUMN | Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated |
Value | Summary |
---|---|
--quote {all,minimal,none,nonnumeric} | When to include quotes, defaults to nonnumeric |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.54. loadbalancer quota reset 링크 복사링크가 클립보드에 복사되었습니다!
Resets quotas to default quotas
Usage:
openstack loadbalancer quota reset [-h] <project>
openstack loadbalancer quota reset [-h] <project>
Value | Summary |
---|---|
<project> | Project to reset quotas (name or id) |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
49.55. loadbalancer quota set 링크 복사링크가 클립보드에 복사되었습니다!
Update a quota
Usage:
Value | Summary |
---|---|
<project> | Name or uuid of the project. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
Value | Summary |
---|---|
At least one of the following arguments is required.--healthmonitor <health_monitor> | New value for the health monitor quota. value -1 means unlimited. |
--listener <listener> | New value for the listener quota. value -1 means unlimited. |
--loadbalancer <load_balancer> | New value for the load balancer quota limit. value -1 means unlimited. |
--member <member> | New value for the member quota limit. value -1 means unlimited. |
--pool <pool> | New value for the pool quota limit. value -1 means unlimited. |
49.56. loadbalancer quota show 링크 복사링크가 클립보드에 복사되었습니다!
Show the quota details for a project
Usage:
Value | Summary |
---|---|
<project> | Name or uuid of the project. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.57. loadbalancer set 링크 복사링크가 클립보드에 복사되었습니다!
Update a load balancer
Usage:
openstack loadbalancer set [-h] [--name <name>] [--description <description>] [--vip-qos-policy-id <vip_qos_policy_id>] [--enable | --disable] <load_balancer>
openstack loadbalancer set [-h] [--name <name>]
[--description <description>]
[--vip-qos-policy-id <vip_qos_policy_id>]
[--enable | --disable]
<load_balancer>
Value | Summary |
---|---|
<load_balancer> | Name or uuid of the load balancer to update. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
--name <name> | Set load balancer name. |
--description <description> | Set load balancer description. |
--vip-qos-policy-id <vip_qos_policy_id> | Set qos policy id for vip port. unset with none. |
--enable | Enable load balancer. |
--disable | Disable load balancer. |
49.58. loadbalancer show 링크 복사링크가 클립보드에 복사되었습니다!
Show the details for a single load balancer
Usage:
openstack loadbalancer show [-h] [-f {json,shell,table,value,yaml}] [-c COLUMN] [--noindent] [--prefix PREFIX] [--max-width <integer>] [--fit-width] [--print-empty] <load_balancer>
openstack loadbalancer show [-h] [-f {json,shell,table,value,yaml}]
[-c COLUMN] [--noindent] [--prefix PREFIX]
[--max-width <integer>] [--fit-width]
[--print-empty]
<load_balancer>
Value | Summary |
---|---|
<load_balancer> | Name or uuid of the load balancer. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.59. loadbalancer stats show 링크 복사링크가 클립보드에 복사되었습니다!
Shows the current statistics for a load balancer
Usage:
Value | Summary |
---|---|
<load_balancer> | Name or uuid of the load balancer. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |
Value | Summary |
---|---|
output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml} | The output format, defaults to table |
-c COLUMN, --column COLUMN | Specify the column(s) to include, can be repeated |
Value | Summary |
---|---|
--noindent | Whether to disable indenting the json |
Value | Summary |
---|---|
a format a UNIX shell can parse (variable="value")--prefix PREFIX | Add a prefix to all variable names |
Value | Summary |
---|---|
--max-width <integer> | Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence. |
--fit-width | Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable |
--print-empty | Print empty table if there is no data to show. |
49.60. loadbalancer status show 링크 복사링크가 클립보드에 복사되었습니다!
Display load balancer status tree in json format
Usage:
openstack loadbalancer status show [-h] <load_balancer>
openstack loadbalancer status show [-h] <load_balancer>
Value | Summary |
---|---|
<load_balancer> | Name or uuid of the load balancer. |
Value | Summary |
---|---|
-h, --help | Show this help message and exit |