Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Chapter 21. Solving common replication problems

Multi-supplier replication uses an eventually-consistency replication model. This means that the same entries can be changed on different servers. When replication occurs between these two servers, Directory Server needs to resolve the conflicting changes. Mostly, resolution occurs automatically, based on the timestamp associated with the change on each server. The most recent change has priority. However, there are some cases where conflicts require manual intervention in order to reach a resolution.

21.1. Identifying and solving naming conflicts
Copiar o link

When several supplier servers receive a request to create an entry with the same distinguished name (DN), each server creates the entry with this DN and a different entry unique identifier (entry ID). The entry ID is stored in the nsuniqueid operational attribute.

For example, Server A and Server B receive a request to create uid=user_name,ou=people,dc=example,dc=com user entry. As a result, each server has its own entry:

  • On Server A, the entry has:

    • uid=user_name,ou=people,dc=example,dc=com
    • nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b

  • On Server B, the entry has:

    • uid=user_name,ou=people,dc=example,dc=com
    • nsuniqueid=643a461e-b61311e1-b23be826-4afeed5f

During replication, Server A replicates newly created entry uid=user_name,ou=people,dc=example,dc=com to Server B, and Server B replicates newly created entry to Server A, and a naming conflict occurs on each server. By comparing change sequence numbers (CSN), each server determines which entry was created earlier. For example, the entry on Server B was created earlier.

The automatic conflict resolution procedure changes the last entry created (the entry on Server A) the following way:

  • Adds the nsuniqueid value to the non-unique DN.
  • Adds the nsds5replconflict attribute with the description which operation caused the conflict.
  • Adds the ldapsubentry objectclass.

Now the following entries exist on both servers:

  • The valid entry with:

    • uid=user_name,ou=people,dc=example,dc=com
    • nsuniqueid=643a461e-b61311e1-b23be826-4afeed5f

  • The conflict entry with:

    • nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=people,dc=example,dc=com
    • nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b

To solve the naming conflict manually, use the following procedure on each server.

Procedure

  1. List the conflict entries: 

    # dsconf <instance_name> repl-conflict list dc=example,dc=com
dn: nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=people,dc=example,dc=com
cn: user_name
displayName: user
gidNumber: 99998
homeDirectory: /var/empty
legalName: user name
loginShell: /bin/false
nsds5replconflict: namingConflict (ADD) uid=user_name,ou=people,dc=example,dc=com
objectClass: top
objectClass: nsPerson
objectClass: nsAccount
objectClass: nsOrgPerson
objectClass: posixAccount
objectClass: ldapsubentry
uid: user_name
uidNumber: 99998
    Copy to Clipboard Toggle word wrap

  2. If conflict entries exist, decide how to proceed:

    • To keep only the valid entry (uid=user_name,ou=people,dc=example,dc=com) and delete the conflict entry, enter: 

      # dsconf <instance_name> repl-conflict delete nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=People,dc=example,dc=com
      Copy to Clipboard Toggle word wrap

    • To keep only the conflict entry (nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=People,dc=example,dc=com) and delete the valid entry, enter: 

      # dsconf <instance_name> repl-conflict swap nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=People,dc=example,dc=com
      Copy to Clipboard Toggle word wrap

    • To keep both entries, specify a new relative distinguished name (RDN) to rename the conflict entry: 

      # dsconf -D "cn=Directory Manager" ldap://server.example.com repl-conflict convert --new-rdn=uid=user_name_NEW nsuniqueid=a7f1758b-512211ec-b115e2e9-7dc2d46b+uid=user_name,ou=people,dc=example,dc=com
      Copy to Clipboard Toggle word wrap

      This command renames the conflict entry to uid=user_name_NEW,ou=people,dc=example,dc=com.

Warning

Directory Server replicates LDAP operations performed on a conflict entry. Usually replicated operations target the entry by using the nsuniqueid of the original operation entry rather than by using the operation dn. However, in cases with conflict entries, the behavior might differ.

21.2. Identifying and solving orphan entry conflicts
Copiar o link

When Directory Server replicates a delete operation and the consumer server finds that the entry to be deleted has child entries, the conflict resolution procedure creates a glue entry to avoid having orphaned entries in the directory.

In the same way, when Directory Server replicates an add operation and the consumer server cannot find the parent entry, the conflict resolution procedure creates a glue entry for the parent.

Glue entries are temporary entries that include the object classes glue and extensibleObject. Glue entries can be created in several ways:

  • If the conflict resolution procedure finds a deleted entry with a matching unique identifier, the glue entry has the same attributes as the deleted entry, but with the added glue object class and the nsds5ReplConflict attribute.

    In such cases, either modify the glue entry to remove the glue object class and the nsds5ReplConflict attribute to keep the entry as a normal entry or delete the glue entry and its child entries.

  • The server creates an entry with the glue and extensibleObject object classes.

Procedure

  1. List the orphan entry conflicts: 

    # dsconf <instance_name> repl-conflict list-glue suffix
dn: ou=parent,dc=example,dc=com
objectClass: top
objectClass: organizationalunit
objectClass: glue
objectClass: extensibleobject
ou: parent
    Copy to Clipboard Toggle word wrap

  2. If orphan entry conflicts exist, decide how to proceed:

    • To delete a glue entry and its child entries, enter: 

      # dsconf <instance_name> repl-conflict delete-glue "ou=parent,dc=example,dc=com"
dn: ou=parent,dc=example,dc=com
objectClass: top
objectClass: organizationalunit
objectClass: extensibleobject
ou: parent
      Copy to Clipboard Toggle word wrap

    • To convert a glue entry into a regular entry, enter: 

      # dsconf <instance_name> repl-conflict convert-glue "ou=parent,dc=example,dc=com"
      Copy to Clipboard Toggle word wrap

21.3. Identifying and solving errors about obsolete or missing suppliers
Copiar o link

Directory Server stores information about the replication topology, such as all suppliers that send updates to other replicas, in a set of metadata called replica update vector (RUV). An RUV contains information about the supplier, such as its ID and URL, the last change state number (CSN) on the local server, and the CSN of the first change. Both suppliers and consumers store RUV information, and they use it to control replication updates.

When you remove a supplier from the replication topology, information about it can remain in another replica’s RUV. You can use a cleanallruv task to remove the RUV entry form all suppliers in the topology.

Prerequisites

  • Replication is enabled.

Procedure

  1. Monitor the /var/log/dirsrv/slapd-<instance_name>/errors log file and search for entries similar to the following: 

    [22/Jan/2021:17:16:01 -0500] NSMMReplicationPlugin - ruv_compare_ruv: RUV [changelog max RUV] does not contain element [{replica 8 ldap://server2.example.com:389} 4aac3e59000000080000 4c6f2a02000000080000] which is present in RUV [database RUV]
...
[22/Jan/2021:17:16:01 -0500] NSMMReplicationPlugin - replica_check_for_data_reload: Warning: for replica dc=example,dc=com there were some differences between the changelog max RUV and the database RUV. If there are obsolete elements in the database RUV, you should remove them using the CLEANALLRUV task. If they are not obsolete, you should check their status to see why there are no changes from those servers in the changelog.
    Copy to Clipboard Toggle word wrap

    In this case, the replica ID 8 causes this error.

  2. Display all RUV records and replica IDs, both valid and invalid: 

    # dsconf <server1_instance_name> replication get-ruv --suffix "dc=example,dc=com"*
RUV:        {replica 1 ldap://server1.example.com} 61a4d8f8000100010000 61a4f5b8000000010000

Replica ID: 1
LDAP URL:   ldap://server1.example.com
Min CSN:    2021-11-29 13:43:20 1 0 (61a4d8f8000100010000)
Max CSN:    2021-11-29 15:46:00 (61a4f5b8000000010000)
RUV:        {replica 2 ldap://server2.example.com} 61a4d8fb000100020000 61a4f550000000020000

Replica ID: 2
LDAP URL:   ldap://server2.example.com
Min CSN:    2021-11-29 13:43:23 1 0 (61a4d8fb000100020000)
Max CSN:    2021-11-29 15:44:16 (61a4f550000000020000)
 RUV:        {replica 8 ldap://server3.example.com} 61a4d903000100080000 61a4d908000000080000

Replica ID: 8
LDAP URL:   ldap://server3.example.com
Min CSN:    2021-11-29 13:43:31 1 0 (61a4d903000100080000)
Max CSN:    2021-11-29 13:43:36 (61a4d908000000080000)
    Copy to Clipboard Toggle word wrap

    Note the list of returned replica IDs: 1, 2, and 8.

  3. Run cleanup tasks for the replica IDs 8. 

    # dsconf <server1_instance_name> repl-tasks cleanallruv --suffix="dc=example,dc=com" --replica-id=8
    Copy to Clipboard Toggle word wrap

    Note that Directory Server replicates RUV cleanup tasks. Therefore, you need to start the tasks on only one supplier.

    If one of the replicas can not be joined, for example if it is down, you can use the --force-cleaning option to achieve an immediate clean up of the RUV.

Verification

  • Display the RUV records and replica IDs: 

    # dsconf <server1_instance_name> replication get-ruv --suffix "dc=example,dc=com"
RUV:        {replica 1 ldap://server1.example.com} 61a4d8f8000100010000 61a4f5b8000000010000

Replica ID: 1
LDAP URL:   ldap://server1.example.com
Min CSN:    2021-11-29 14:02:10 1 0 (61a4d8f8000100010000)
Max CSN:    2021-11-29 16:00:00 (61a4f5b8000000010000)
RUV:        {replica 2 ldap://server2.example.com} 61a4d8fb000100020000 61a4f550000000020000

Replica ID: 2
LDAP URL:   ldap://server2.example.com
Min CSN:    2021-11-29 14:02:10 1 0 (61a4d8fb000100020000)
Max CSN:    2021-11-29 15:58:22 (61a4f550000000020000)
    Copy to Clipboard Toggle word wrap

    The command no longer returns RUV entries for the replica IDs 8.

21.4. Stopping cleanallruv task on a supplier
Copiar o link

For performance or maintenance purposes, it is possible to stop the cleanallruv task if the task runs for a long time. You can use the dsconf utility to stop the task.

Prerequisites

  • Replication is enabled.

Procedure

  1. Display all cleanallruv tasks on a supplier: 

    # dsconf <instance_name> repl-tasks list-cleanruv-tasks

dn: cn=cleanallruv_2025-04-15T09:15:18.535868,cn=cleanallruv,cn=tasks,cn=config
cn: cleanallruv_2025-04-15T09:15:18.535868
nsTaskCreated: 20250415131518Z
...
nsTaskStatus: Not all replicas online, retrying in 20 seconds...
nsTaskTotalItems: 1
nsTaskWarning: 0
objectClass: top
objectClass: extensibleObject
replica-base-dn: dc=example,dc=com
replica-id: 2
    Copy to Clipboard Toggle word wrap

    The example shows that the cleanallruv task cannot be completed because the replica became unresponsive. In some cases, it can negatively impact the server performance.

  2. Stop the cleanallruv task: 

    # dsconf <instance_name> repl-tasks abort-cleanallruv --suffix "dc=example,dc=com" --replica-id 12
    Copy to Clipboard Toggle word wrap

    Additionally, you can use the --certify option to force Directory Server to stop the cleanallruv task on all replicas.

Verification

  • Display all cleanallruv tasks on the supplier: 

    # dsconf <instance_name> repl-tasks list-cleanruv-tasks

dn: cn=cleanallruv_2025-04-15T09:15:18.535868,cn=cleanallruv,cn=tasks,cn=config
cn: cleanallruv_2025-04-15T09:15:18.535868
nsTaskCreated: 20250415131518Z
...
nsTaskStatus: Task aborted for rid(2).
nsTaskTotalItems: 1
nsTaskWarning: 0
objectClass: top
objectClass: extensibleObject
replica-base-dn: dc=example,dc=com
replica-id: 2
    Copy to Clipboard Toggle word wrap
Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat