Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

2.2.2. Network Time Protocol Setup

As opposed to the manual setup described above, you can also synchronize the system clock with a remote server over the Network Time Protocol (NTP). For the one-time synchronization only, use the ntpdate command:
  1. Firstly, check whether the selected NTP server is accessible: 
    ~]# ntpdate -q server_addressntpdate -q server_address
    Copy to Clipboard Toggle word wrap
    For example: 
    ~]# ntpdate -q 0.rhel.pool.ntp.org
    Copy to Clipboard Toggle word wrap
  2. When you find a satisfactory server, run the ntpdate command followed by one or more server addresses: 
    ~]# ntpdate server_address...ntpdate server_address...
    Copy to Clipboard Toggle word wrap
    For instance: 
    ~]# ntpdate 0.rhel.pool.ntp.org 1.rhel.pool.ntp.org
    Copy to Clipboard Toggle word wrap
    Unless an error message is displayed, the system time should now be set. You can check the current by setting typing date without any additional arguments as shown in Section 2.2.1, “Date and Time Setup”.
  3. In most cases, these steps are sufficient. Only if you really need one or more system services to always use the correct time, enable running the ntpdate at boot time: 
    ~]# chkconfig ntpdate on
    Copy to Clipboard Toggle word wrap
    For more information about system services and their setup, see Chapter 12, Services and Daemons.

    Note

    If the synchronization with the time server at boot time keeps failing, i.e., you find a relevant error message in the /var/log/boot.log system log, try to add the following line to /etc/sysconfig/network: 
    NETWORKWAIT=1
    Copy to Clipboard Toggle word wrap
However, the more convenient way is to set the ntpd daemon to synchronize the time at boot time automatically:
  1. Open the NTP configuration file /etc/ntp.conf in a text editor such as vi or nano, or create a new one if it does not already exist: 
    ~]# nano /etc/ntp.conf
    Copy to Clipboard Toggle word wrap
  2. Now add or edit the list of public NTP servers. If you are using Red Hat Enterprise Linux 6, the file should already contain the following lines, but feel free to change or expand these according to your needs: 
    server 0.rhel.pool.ntp.org iburst
server 1.rhel.pool.ntp.org iburst
server 2.rhel.pool.ntp.org iburst
server 3.rhel.pool.ntp.org iburst
    Copy to Clipboard Toggle word wrap
    The iburst directive at the end of each line is to speed up the initial synchronization. As of Red Hat Enterprise Linux 6.5 it is added by default. If upgrading from a previous minor release, and your /etc/ntp.conf file has been modified, then the upgrade to Red Hat Enterprise Linux 6.5 will create a new file /etc/ntp.conf.rpmnew and will not alter the existing /etc/ntp.conf file.
  3. Once you have the list of servers complete, in the same file, set the proper permissions, giving the unrestricted access to localhost only: 
    restrict default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
restrict 127.0.0.1
restrict -6 ::1
    Copy to Clipboard Toggle word wrap
  4. Save all changes, exit the editor, and restart the NTP daemon: 
    ~]# service ntpd restart
    Copy to Clipboard Toggle word wrap
  5. Make sure that ntpd is started at boot time: 
    ~]# chkconfig ntpd on
    Copy to Clipboard Toggle word wrap
Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat