Red Hat Summit Red Hat SummitSuporteConsoleDesenvolvedoresComeçar um testeContato

Este conteúdo não está disponível no idioma selecionado.

Chapter 19. Monitoring Red Hat Gluster Storage Gluster Workload

Monitoring storage volumes is helpful when conducting a capacity planning or performance tuning activity on a Red Hat Gluster Storage volume. You can monitor the Red Hat Gluster Storage volumes with different parameters and use those system outputs to identify and troubleshoot issues.
You can use the volume top and volume profile commands to view vital performance information and identify bottlenecks on each brick of a volume.
You can also perform a statedump of the brick processes and NFS server process of a volume, and also view volume status and volume information.

Note

If you restart the server process, the existing profile and top information will be reset.

19.1. Running the Volume Profile Command
Copiar o link

The volume profile command provides an interface to get the per-brick or NFS server I/O information for each File Operation (FOP) of a volume. This information helps in identifying the bottlenecks in the storage system.
This section describes how to use the volume profile command.

19.1.1. Start Profiling
Copiar o link

To view the file operation information of each brick, start the profiling command:
# gluster volume profile VOLNAME start
For example, to start profiling on test-volume: 
# gluster volume profile test-volume start
Profiling started on test-volume
Copy to Clipboard Toggle word wrap

Important

Running profile command can affect system performance while the profile information is being collected. Red Hat recommends that profiling should only be used for debugging.
When profiling is started on the volume, the following additional options are displayed when using the volume info command: 
diagnostics.count-fop-hits: on

diagnostics.latency-measurement: on
Copy to Clipboard Toggle word wrap

19.1.2. Displaying the I/O Information
Copiar o link

To view the I/O information of the bricks on a volume, use the following command:
# gluster volume profile VOLNAME info
For example, to view the I/O information of test-volume: 
# gluster volume profile test-volume info
Brick: Server1:/rhgs/brick0/2
Cumulative Stats:

Block                     1b+           32b+           64b+
Size:
       Read:                0              0              0
       Write:             908             28              8

Block                   128b+           256b+         512b+
Size:
       Read:                0               6             4
       Write:               5              23            16

Block                  1024b+          2048b+        4096b+
Size:
       Read:                 0              52           17
       Write:               15             120          846

Block                   8192b+         16384b+      32768b+
Size:
       Read:                52               8           34
       Write:              234             134          286

Block                                  65536b+     131072b+
Size:
       Read:                               118          622
       Write:                             1341          594


%-latency  Avg-      Min-       Max-       calls     Fop
          latency   Latency    Latency
___________________________________________________________
4.82      1132.28   21.00      800970.00   4575    WRITE
5.70       156.47    9.00      665085.00   39163   READDIRP
11.35      315.02    9.00     1433947.00   38698   LOOKUP
11.88     1729.34   21.00     2569638.00    7382   FXATTROP
47.35   104235.02 2485.00     7789367.00     488   FSYNC

------------------

------------------

Duration     : 335

BytesRead    : 94505058

BytesWritten : 195571980
Copy to Clipboard Toggle word wrap
To view the I/O information of the NFS server on a specified volume, use the following command:
# gluster volume profile VOLNAME info nfs
For example, to view the I/O information of the NFS server on test-volume: 
# gluster volume profile test-volume info nfs
NFS Server : localhost
----------------------
Cumulative Stats:
   Block Size:              32768b+               65536b+
 No. of Reads:                    0                     0
No. of Writes:                 1000                  1000
 %-latency   Avg-latency   Min-Latency   Max-Latency   No. of calls         Fop
 ---------   -----------   -----------   -----------   ------------        ----
      0.01     410.33 us     194.00 us     641.00 us              3      STATFS
      0.60     465.44 us     346.00 us     867.00 us            147       FSTAT
      1.63     187.21 us      67.00 us    6081.00 us           1000     SETATTR
      1.94     221.40 us      58.00 us   55399.00 us           1002      ACCESS
      2.55     301.39 us      52.00 us   75922.00 us            968        STAT
      2.85     326.18 us      88.00 us   66184.00 us           1000    TRUNCATE
      4.47     511.89 us      60.00 us  101282.00 us           1000       FLUSH
      5.02    3907.40 us    1723.00 us   19508.00 us            147    READDIRP
     25.42    2876.37 us     101.00 us  843209.00 us           1012      LOOKUP
     55.52    3179.16 us     124.00 us  121158.00 us           2000       WRITE

    Duration: 7074 seconds
   Data Read: 0 bytes
Data Written: 102400000 bytes

Interval 1 Stats:
   Block Size:              32768b+               65536b+
 No. of Reads:                    0                     0
No. of Writes:                 1000                  1000
 %-latency   Avg-latency   Min-Latency   Max-Latency   No. of calls         Fop
 ---------   -----------   -----------   -----------   ------------        ----
      0.01     410.33 us     194.00 us     641.00 us              3      STATFS
      0.60     465.44 us     346.00 us     867.00 us            147       FSTAT
      1.63     187.21 us      67.00 us    6081.00 us           1000     SETATTR
      1.94     221.40 us      58.00 us   55399.00 us           1002      ACCESS
      2.55     301.39 us      52.00 us   75922.00 us            968        STAT
      2.85     326.18 us      88.00 us   66184.00 us           1000    TRUNCATE
      4.47     511.89 us      60.00 us  101282.00 us           1000       FLUSH
      5.02    3907.40 us    1723.00 us   19508.00 us            147    READDIRP
     25.41    2878.07 us     101.00 us  843209.00 us           1011      LOOKUP
     55.53    3179.16 us     124.00 us  121158.00 us           2000       WRITE

    Duration: 330 seconds
   Data Read: 0 bytes
Data Written: 102400000 bytes
Copy to Clipboard Toggle word wrap

19.1.3. Stop Profiling
Copiar o link

To stop profiling on a volume, use the following command:
# gluster volume profile VOLNAME stop
For example, to stop profiling on test-volume: 
# gluster volume profile test-volume stop
Profiling stopped on test-volume
Copy to Clipboard Toggle word wrap
Voltar ao topo
Red Hat logoGithubredditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar. Explore nossas atualizações recentes.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja o Blog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

Theme

© 2025 Red Hat