Este conteúdo não está disponível no idioma selecionado.

6.11. Enabling SSL/TLS on the Overcloud

By default, the Overcloud uses unencrypted endpoints for its services; this means that the Overcloud configuration requires an additional environment file to enable SSL/TLS for its Public API endpoints.

Note

This process only enables SSL/TLS for Public API endpoints. The Internal and Admin APIs remain unencrypted.

This process requires network isolation to define the endpoints for the Public API. See Section 6.2, “Isolating Networks” for instruction on network isolation.

Ensure you have a private key and certificate authority created. See Appendix A, SSL/TLS Certificate Configuration for more information on creating a valid SSL/TLS key and certificate authority file.

Enabling SSL/TLS

Copy the enable-tls.yaml environment file from the Heat template collection:

cp -r /usr/share/openstack-tripleo-heat-templates/environments/enable-tls.yaml ~/templates/.

$ cp -r /usr/share/openstack-tripleo-heat-templates/environments/enable-tls.yaml ~/templates/.

Copy to Clipboard

Toggle word wrap

Edit this file and make the following changes for these parameters:

parameter_defaults:

SSLCertificate:

Copy the contents of the certificate file into the SSLCertificate parameter. For example:

parameter_defaults:
  SSLCertificate: |
    -----BEGIN CERTIFICATE-----
    MIIDgzCCAmugAwIBAgIJAKk46qw6ncJaMA0GCSqGSIb3DQEBCwUAMFgxCzAJBgNV
    ...
    sFW3S2roS4X0Af/kSSD8mlBBTFTCMBAj6rtLBKLaQbIxEpIzrgvp
    -----END CERTIFICATE-----

parameter_defaults:
  SSLCertificate: |
    -----BEGIN CERTIFICATE-----
    MIIDgzCCAmugAwIBAgIJAKk46qw6ncJaMA0GCSqGSIb3DQEBCwUAMFgxCzAJBgNV
    ...
    sFW3S2roS4X0Af/kSSD8mlBBTFTCMBAj6rtLBKLaQbIxEpIzrgvp
    -----END CERTIFICATE-----

Copy to Clipboard

Toggle word wrap

Important

The certificate authority contents require the same indentation level for all new lines.

SSLKey:

Copy the contents of the private key into the SSLKey parameter. For example>

parameter_defaults:
  ...
  SSLKey: |
    -----BEGIN RSA PRIVATE KEY-----
    MIIEowIBAAKCAQEAqVw8lnQ9RbeI1EdLN5PJP0lVO9hkJZnGP6qb6wtYUoy1bVP7
    ...
    ctlKn3rAAdyumi4JDjESAXHIKFjJNOLrBmpQyES4XpZUC7yhqPaU
    -----END RSA PRIVATE KEY-----

parameter_defaults:
  ...
  SSLKey: |
    -----BEGIN RSA PRIVATE KEY-----
    MIIEowIBAAKCAQEAqVw8lnQ9RbeI1EdLN5PJP0lVO9hkJZnGP6qb6wtYUoy1bVP7
    ...
    ctlKn3rAAdyumi4JDjESAXHIKFjJNOLrBmpQyES4XpZUC7yhqPaU
    -----END RSA PRIVATE KEY-----

Copy to Clipboard

Toggle word wrap

Important

The private key contents require the same indentation level for all new lines.

EndpointMap:

The EndpointMap contains a mapping of the services using HTTPS and HTTP communication. If using DNS for SSL communication, leave this section with the defaults. However, if using an IP address for the SSL certificate's common name (see Appendix A, SSL/TLS Certificate Configuration), replace all instances of CLOUDNAME with IP_ADDRESS. Use the following command to accomplish this:

sed -i 's/CLOUDNAME/IP_ADDRESS/' ~/templates/enable-tls.yaml

$ sed -i 's/CLOUDNAME/IP_ADDRESS/' ~/templates/enable-tls.yaml

Copy to Clipboard

Toggle word wrap

Important

Do not substitute IP_ADDRESS or CLOUDNAME for actual values. Heat replaces these variables with the appropriate value during the Overcloud creation.

resource_registry:

OS::TripleO::NodeTLSData:

Change the resource path for OS::TripleO::NodeTLSData: to an absolute path:

resource_registry:
OS::TripleO::NodeTLSData: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/tls/tls-cert-inject.yaml

resource_registry:
OS::TripleO::NodeTLSData: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/tls/tls-cert-inject.yaml

Copy to Clipboard

Toggle word wrap

Injecting a Root Certificate

If the certificate signer is not in the default trust store on the Overcloud image, you must inject the certificate authority into the Overcloud image. Copy the inject-trust-anchor.yaml environment file from the heat template collection:

cp -r /usr/share/openstack-tripleo-heat-templates/environments/inject-trust-anchor.yaml ~/templates/.

$ cp -r /usr/share/openstack-tripleo-heat-templates/environments/inject-trust-anchor.yaml ~/templates/.

Copy to Clipboard

Toggle word wrap

Edit this file and make the following changes for these parameters:

parameter_defaults:

SSLRootCertificate:

Copy the contents of the root certificate authority file into the SSLRootCertificate parameter. For example:

parameter_defaults:
  SSLRootCertificate: |
    -----BEGIN CERTIFICATE-----
    MIIDgzCCAmugAwIBAgIJAKk46qw6ncJaMA0GCSqGSIb3DQEBCwUAMFgxCzAJBgNV
    ...
    sFW3S2roS4X0Af/kSSD8mlBBTFTCMBAj6rtLBKLaQbIxEpIzrgvp
    -----END CERTIFICATE-----

parameter_defaults:
  SSLRootCertificate: |
    -----BEGIN CERTIFICATE-----
    MIIDgzCCAmugAwIBAgIJAKk46qw6ncJaMA0GCSqGSIb3DQEBCwUAMFgxCzAJBgNV
    ...
    sFW3S2roS4X0Af/kSSD8mlBBTFTCMBAj6rtLBKLaQbIxEpIzrgvp
    -----END CERTIFICATE-----

Copy to Clipboard

Toggle word wrap

Important

The certificate authority contents require the same indentation level for all new lines.

resource_registry:

OS::TripleO::NodeTLSCAData:

Change the resource path for OS::TripleO::NodeTLSCAData: to an absolute path:

resource_registry:
  OS::TripleO::NodeTLSCAData: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/tls/ca-inject.yaml

resource_registry:
  OS::TripleO::NodeTLSCAData: /usr/share/openstack-tripleo-heat-templates/puppet/extraconfig/tls/ca-inject.yaml

Copy to Clipboard

Toggle word wrap

Configuring DNS Endpoints

If using a DNS hostname to access the Overcloud through SSL/TLS, create a new environment file (~/templates/cloudname.yaml) to define the hostname of the Overcloud's endpoints. Use the following parameters:

parameter_defaults:

CloudName:: The DNS hostname of the Overcloud endpoints.
DnsServers:: A list of DNS servers to use. The configured DNS servers must contain an entry for the configured CloudName that matches the IP address of the Public API.

An example of the contents for this file:

parameter_defaults:
CloudName: overcloud.example.com
DnsServers: ["10.0.0.1"]

parameter_defaults:
CloudName: overcloud.example.com
DnsServers: ["10.0.0.1"]

Copy to Clipboard

Toggle word wrap

Adding Environment Files During Overcloud Creation

The deployment command (openstack overcloud deploy) in Chapter 7, Creating the Overcloud uses the -e option to add environment files. Add the environment files from this section in the following order:

The environment file to enable SSL/TLS (enable-tls.yaml)
The environment file to set the DNS hostname (cloudname.yaml)
The environment file to inject the root certificate authority (inject-trust-anchor.yaml)

For example:

openstack overcloud deploy --templates [...] -e /home/stack/templates/enable-tls.yaml -e ~/templates/cloudname.yaml -e ~/templates/inject-trust-anchor.yaml

$ openstack overcloud deploy --templates [...] -e /home/stack/templates/enable-tls.yaml -e ~/templates/cloudname.yaml -e ~/templates/inject-trust-anchor.yaml

Copy to Clipboard

Toggle word wrap

Voltar ao topo

Este conteúdo não está disponível no idioma selecionado.

6.11. Enabling SSL/TLS on the Overcloud

Enabling SSL/TLS

Injecting a Root Certificate

Configuring DNS Endpoints

Adding Environment Files During Overcloud Creation

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Tornando o open source mais inclusivo

Sobre a Red Hat

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links