Pesquisar

Este conteúdo não está disponível no idioma selecionado.

4.182. sos

download PDF
An updated sos package that fixes one bug is now available for Red Hat Enterprise Linux 5.
The sos package contains a set of tools that gather information from system hardware, logs and configuration files. The information can then be used for diagnostic purposes and debugging.

Bug Fix

BZ#748804
With the RHBA-2011-1028 advisory, the sosreport utility introduced the "--tmp-dir" command option allowing the sosreport tarballs to be stored in a user-specified directory. After this change, sosreport no longer determined a directory for the tarballs from the TMP environment variable. The Red Hat Enterprise Virtualization 2.2. Log Collector application expected sosreport to use the TMP variable therefore Log Collector failed to collect the tarballs correctly from hosts. With this update, sosreport relies on the TMP environment variable again if the directory is not specified by the "--tmp-dir" option. Log Collector now works as expected.
All users of sos are advised to upgrade to this updated package, which fixes this bug.
An updated sos package that resolves one security issue, fixes several bugs, and adds various enhancements is now available for Red Hat Enterprise Linux 5.
The Red Hat Security Response Team has rated this update as having low security impact. Common Vulnerability Scoring System (CVSS) base scores, which give detailed severity ratings, are available for each vulnerability from the CVE links associated with each description below.
The sos package contains a set of tools that gather information about system hardware and configuration.

Security Fixes

CVE-2011-4083
The sosreport utility incorrectly included Certificate-based Red Hat Network private entitlement keys in the resulting archive of debugging information. An attacker able to access the archive could use the keys to access Red Hat Network content available to the host. This issue did not affect users of Red Hat Network Classic.

Bug Fixes

BZ#733133
With the RHBA-2011-1028 advisory, the sosreport utility introduced the --tmp-dir command option allowing the sosreport tarballs to be stored in a user-specified directory. After this change, sosreport no longer determined a directory for the tarballs from the TMP environment variable. The Red Hat Enterprise Virtualization 2.2 Log Collector application expected sosreport to use the TMP variable therefore Log Collector failed to collect the tarballs correctly from hosts. With this update, sosreport relies on the TMP environment variable again if the directory is not specified by the --tmp-dir option and Log Collector now works as expected.
BZ#742567
Prior versions of the sos cluster module incorrectly used the python lstrip() method to extract the release number of the kernel package from the complete NVR (Name, Version, Release) string. This resulted in invalid release strings for certain kernel versions. As a result, sos incorrectly reported warnings for valid gfs2 kernel module configurations. The cluster module has been modified to correctly obtain the release substring from the complete package NVR and false positives are no longer reported for valid package combinations.
BZ#717962
The internal API used by sos modules to collect files and directories handled symbolic links with a relative target path incorrectly. Due to this bug only the symbolic links were copied to the sosreport tarball and the linked files were omitted. With this update, the file and directory copying routines have been modified to correctly copy and adjust symbolic link targets within the sosreport tree and targets of relative symbolic links are properly included in the generated report.
BZ#708346
Previously, sosreport used by default a threaded execution model to invoke plug-in modules. Consequently, a keyboard interrupt (Ctrl+c) failed to terminate the program due to improper synchronization between the main and child threads. The sosreport command now runs in single-threaded mode by default. This behavior was previously enabled by running the command with the --no-multithread option. This update adds the --multithread option to allow the previous behavior. As a result, sosreport now behaves more consistently when keyboard interrupts or other signals are received.

Note

Occasionally, sos can fail to respond to the keyboard interrupt (Ctrl+C). In such a case, the user is advised to suspend the process (press the Ctrl+Z keys in the interactive shell running sosreport) and kill the sosreport process: issue the kill pid commands where pid is the PID of the sosreport process. In the case the command fails, send the process the SIGKILL signal: issue the kill -9 pid command.
BZ#717167
Previously, sos attempted to determine whether the system is configured to use the traditional syslogd or rsyslogd daemon for logging. However, the used heuristic incorrectly identified an installed rsyslog as being used even though it was not configured. As a result, sos failed to collect custom-defined log destinations specified in the syslog.conf file of the host. The general module no longer attempts to determine, which log daemon is in use and collects any user-defined log destinations present in either the rsyslog or syslog configuration file.
BZ#716987
The sosreport command allows the user to restrict the maximum size of log files collected by the general plug-in using the general.syslogsize option. If the limit is exceeded, a portion of the log file is stored in the report in the plug-in sos_commands directory. Prior sos versions did not create a symbolic link from the default location for the size-limited log file to the location in the plug-in commands directory. If the user was unaware that log size limiting was applied, they may have assumed that the file was missing. With this release, sosreport creates symbolic links that point from the default location to the size-limited log file. Users can now find the expected content at the default location within sosreport regardless of the applied log file size limits.
BZ#655046
Due to an incorrect translation in the French locale files, sos printed the following confusing prompt when run in interactive mode:
Voulez vous continuer (y/n)?
Attempting to enter the suggested prompt response (y) resulted in an error. The expected response string has been changed to match the translated prompt and the program now suggests the correct response.
BZ#717480
Prior to this update, sos suppressed exceptions raised by plug-ins so that a bug in one plug-in would not prevent generation of the entire sosreport. Since plug-in exceptions are caught internally and not reported to the user or logged, this mechanism could conceal problems in the default plug-in set. The sosreport command has been modified to report any exceptions raised during plug-in processing to the sos log file or to the terminal output when run in verbose mode. Plug-in exceptions can now be discovered with the normal sos logging mechanisms while retaining the previous behavior of not permitting such exceptions to prematurely terminate the sos process.
BZ#750573
The sosreport command uses the Python libxml2 bindings to parse XML-formatted files such as /etc/cluster/cluster.conf. A malformed XML markup triggers a parser exception. This exception was caught by the generic module handling routines and was not reported to the user. Systems with a malformed cluster.conf reported no errors but the cluster module terminated abnormally without collecting the full set of data. The cluster module has been modified to catch parser exceptions internally and print a diagnostic message to alert the user to the problem.

Enhancements

BZ#565996
Veritas storage devices and high-availability products are commonly deployed on Red Hat Enterprise Linux systems, and provide scripts to collect configuration and status information for support purposes. Prior releases of sos were not able to include their output in sosreports. This update adds a new sos module, which collects output from Veritas scripts and Veritas support data is now collected automatically when sosreport is executed on qualified systems.
BZ#568635
Prior versions of sos did not collect the libvirt configuration or log files requiring administrators to manually collect and submit these files. A new sos module has been included and the libvirt configuration files in the /etc/libvirt/ directory and log files in the /var/log/libvirt/ directory are now collected when present.
BZ#667783
Prior to this update, sos did not support collection of gfs2-specific configuration and debugging information. A new sos module has been added that collects detailed configuration and debug information for this subsystem: file system metadata, dlm (distributed lock manager) state, journal sizes and counts, and gfs2 glock debugging data.
BZ#627416
The sos certificate system module did not support Red Hat Certificate System later than the 7.3 version. As a result, on Red Hat Certificate System 8.0 or later, the configuration and log files for these versions were not collected automatically. The cs module has now been updated to include support for the later versions, and collection of configuration and log data on the later Red Hat Certificate System works as expected. In addition, the functionality of the dogtag module has been merged to the revised cs module and the dogtag module has been removed from the sos package.
BZ#641020
Prior versions of sos only collected basic configuration information for Red Hat Enterprise MRG components and the user of these components had to retrieve the required data manually. This update expands the set of data collected by the mrggrid module and sos now collects the full logs, configuration, and status information from MRG components automatically.
BZ#673246
Prior versions of sos did not capture InfiniBand-specific information. This update adds a new module to sos that captures this information and the sosreport command now automatically collects the output of the ibv_devices and ibv_devinfo commands on appropriately equipped systems.
BZ#677123
Systems using the software iSCSI target may require specific additional information to be collected in order to diagnose problems with these storage components. Prior versions of the sos package did not support collecting of this information and the user had to retrieve the details manually. This update adds the iscsi module that collects configuration and debugging output from the scsi-target-utils package and the information about configured software iSCSI targets is collected automatically.
All sos users are advised to upgrade to this updated package, which resolves the issue, fixes these bugs, and adds these enhancements.
Red Hat logoGithubRedditYoutubeTwitter

Aprender

Experimente, compre e venda

Comunidades

Sobre a documentação da Red Hat

Ajudamos os usuários da Red Hat a inovar e atingir seus objetivos com nossos produtos e serviços com conteúdo em que podem confiar.

Tornando o open source mais inclusivo

A Red Hat está comprometida em substituir a linguagem problemática em nosso código, documentação e propriedades da web. Para mais detalhes veja oBlog da Red Hat.

Sobre a Red Hat

Fornecemos soluções robustas que facilitam o trabalho das empresas em plataformas e ambientes, desde o data center principal até a borda da rede.

© 2024 Red Hat, Inc.