红帽全球峰会此内容没有您所选择的语言版本。
8.2. Queue Sizing
8.2.1. Controlling Queue Size
复制链接链接已复制到粘贴板!
Controlling the size of queues is an important part of performance management in a messaging system.
When queues are created, you can specify a maximum queue size (
qpid.max_size) and maximum message count (qpid.max_count) for the queue.
qpid.max_size is specified in bytes. qpid.max_count is specified as the number of messages.
The following
qpid-config creates a queue with a maximum size in memory of 200MB, and a maximum number of 5000 messages:
qpid-config add queue my-queue --max-queue-size=204800000 --max-queue-count 5000
qpid-config add queue my-queue --max-queue-size=204800000 --max-queue-count 5000
In an application, the
qpid.max_count and qpid.max_size directives go inside the arguments of the x-declare of the node. For example, the following address will create the queue as the qpid-config command above:
- Python
tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800000}}}}")tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800000}}}}")Copy to Clipboard Copied! Toggle word wrap Toggle overflow
Note that the
qpid.max_count attribute will only be applied if the queue does not exist when this code is executed.
Behavior when limits are reached:
qpid.policy_type
The behavior when a queue reaches these limits is configurable. By default, on non-durable queues the behavior is reject: further attempts to send to the queue result in a TargetCapacityExceeded exception being thrown at the sender.
The configurable behavior is set using the
qpid.policy_type option. The possible values are:
- reject
- Message publishers throw an exception
TargetCapacityExceeded. This is the default behavior for non-durablequeues. - ring
- The oldest messages are removed to make room for newer messages.
The following example
qpid-config command sets the limit policy to ring:
qpid-config add queue my-queue --max-queue-size=204800 --max-queue-count 5000 --limit-policy ring
qpid-config add queue my-queue --max-queue-size=204800 --max-queue-count 5000 --limit-policy ring
The same thing is achieved in an application like so:
- Python
tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800, 'qpid.policy_type': 'ring'}}}}")tx = ssn.sender("my-queue; {create: always, node: {x-declare: {'auto-delete': True, arguments:{'qpid.max_count': 5000, 'qpid.max_size': 204800, 'qpid.policy_type': 'ring'}}}}")Copy to Clipboard Copied! Toggle word wrap Toggle overflow
See Also:
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}