Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

5.3. ChangeSets

5.3.1. Changesets
复制链接

The changeset feature facilitates the building of knowledge bases without using the API. Changesets can include any number of resources. They can also support additional configuration information, which currently is only needed for decision tables.
The file changeset.xml contains a list of resources for this. It can also point recursively to another changeset XML file.
Report a bug

5.3.2. Changeset Example
复制链接

A resource approach is employed that uses a prefix to indicate the protocol. All the protocols provided by java.net.URL, such as "file" and "http", are supported, as well as an additional "classpath". Currently the type attribute must always be specified for a resource, as it is not inferred from the file name extension. This is demonstrated in the example below: 
<change-set xmlns='http://drools.org/drools-5.0/change-set'
             xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
             xs:schemaLocation='http://drools.org/drools-5.0/change-set http://anonsvn.jboss.org/repos/labs/labs/jbossrules/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
   <add>
       <resource source='http:org/domain/myrules.drl' type='DRL' />
   </add>
 </change-set>
Copy to Clipboard Toggle word wrap
The above example can be used by changing the resource type to CHANGE_SET: 
KnowledgeBuilder kbuilder = KnowledgeBuilderFactory.newKnowledgeBuilder();
kbuilder.add( ResourceFactory.newClasspathResource( "myChangeSet.xml", getClass() ),
              ResourceType.CHANGE_SET );
if ( kbuilder.hasErrors() ) {
    System.err.println( builder.getErrors().toString() );
}
Copy to Clipboard Toggle word wrap
Report a bug

5.3.3. Extended Changeset Example
复制链接

ChangeSets can include any number of resources, and they even support additional configuration information, which is only currently needed for decision tables. The example below is expanded to load the rules from a http URL location, and an Excel decision table from the classpath: 
<change-set xmlns='http://drools.org/drools-5.0/change-set'
             xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
             xs:schemaLocation='http://drools.org/drools-5.0/change-set.xsd http://anonsvn.jboss.org/repos/labs/labs/jbossrules/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
   <add>
       <resource source='http:org/domain/myrules.drl' type='DRL' />
       <resource source='classpath:data/IntegrationExampleTest.xls' type="DTABLE">
           <decisiontable-conf input-type="XLS" worksheet-name="Tables_2" />
       </resource>
   </add>
 </change-set>
Copy to Clipboard Toggle word wrap
Report a bug

5.3.4. Changesets and Directories Example
复制链接

You can specify a directory to put content into. It is expected that all the files are of the specified type, since type is not yet inferred from the file name extensions: 
<change-set xmlns='http://drools.org/drools-5.0/change-set'
             xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
             xs:schemaLocation='http://drools.org/drools-5.0/change-set.xsd http://anonsvn.jboss.org/repos/labs/labs/jbossrules/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
   <add>
       <resource source='file://myfolder/' type='DRL' />
   </add>
 </change-set>
Copy to Clipboard Toggle word wrap
Report a bug

5.3.5. Building Using Configuration and the ChangeSet XML
复制链接

You can create definitions using a configuration within the ChangeSet XML. The simple XML file supports three elements: add, remove, and modify. Each of these have a sequence of <resource> subelements defining a configuration entity.
The following example is a none-normative XML schema ChangeSet: 
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema"
           xmlns="http://drools.org/drools-5.0/change-set"
           targetNamespace="http://drools.org/drools-5.0/change-set">

  <xs:element name="change-set" type="ChangeSet"/>

  <xs:complexType name="ChangeSet">
    <xs:choice maxOccurs="unbounded">
      <xs:element name="add"    type="Operation"/>
      <xs:element name="remove" type="Operation"/>
      <xs:element name="modify" type="Operation"/>
    </xs:choice>
  </xs:complexType>

  <xs:complexType name="Operation">
    <xs:sequence>
      <xs:element name="resource" type="Resource"
                  maxOccurs="unbounded"/>
    </xs:sequence>
  </xs:complexType>

  <xs:complexType name="Resource">
    <xs:sequence>
      <!-- To be used with <resource type="DTABLE"...> -->
      <xs:element name="decisiontable-conf" type="DecTabConf"
                  minOccurs="0"/>
    </xs:sequence>
    <!-- java.net.URL, plus "classpath" protocol -->
    <xs:attribute name="source" type="xs:string"/>
    <xs:attribute name="type"   type="ResourceType"/>
  </xs:complexType>

  <xs:complexType name="DecTabConf">
    <xs:attribute name="input-type"     type="DecTabInpType"/>
    <xs:attribute name="worksheet-name" type="xs:string"
                  use="optional"/>
  </xs:complexType>

  <!-- according to org.drools.builder.ResourceType -->
  <xs:simpleType name="ResourceType">
    <xs:restriction base="xs:string">
      <xs:enumeration value="DRL"/>
      <xs:enumeration value="XDRL"/>
      <xs:enumeration value="DSL"/>
      <xs:enumeration value="DSLR"/>
      <xs:enumeration value="DRF"/>
      <xs:enumeration value="DTABLE"/>
      <xs:enumeration value="PKG"/>
      <xs:enumeration value="BRL"/>
      <xs:enumeration value="CHANGE_SET"/>
    </xs:restriction>
  </xs:simpleType>

  <!-- according to org.drools.builder.DecisionTableInputType -->
  <xs:simpleType name="DecTabInpType">
    <xs:restriction base="xs:string">
      <xs:enumeration value="XLS"/>
      <xs:enumeration value="CSV"/>
    </xs:restriction>
  </xs:simpleType>

</xs:schema>
Copy to Clipboard Toggle word wrap

Note

Please note, the previous XML schema is for illustration purposes.
Report a bug

5.3.6. ChangeSet XML Example
复制链接

This is an example of a basic ChangeSet XML schema that loads a single DRL file: 
<change-set xmlns='http://drools.org/drools-5.0/change-set'
             xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
             xs:schemaLocation='http://drools.org/drools-5.0/change-set.xsd http://anonsvn.jboss.org/repos/labs/labs/jbossrules/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
   <add>
      <resource source='file:/project/myrules.drl' type='DRL' />
   </add>
</change-set>
Copy to Clipboard Toggle word wrap
Report a bug

5.3.7. ChangeSet Protocols
复制链接

The ChangeSet supports all the protocols provided by java.net.URL, such as "file" and "http", as well as an additional "classpath". The type attribute must always be specified for a resource, as it is not inferred from the file name extension.
Use the file: prefix to signify the protocol for the resource.

Note

When using XML schema, the Class Loader will default to the one used by the Knowledge Builder unless the ChangeSet XML is itself loaded by the ClassPath resource, in which case it will use the Class Loader specified for that resource.
Report a bug

5.3.8. Loading the ChangeSet XML
复制链接

Procedure 5.4. Task

  1. Use the API to load your ChangeSet.
  2. Use this code to access the ChangeSet XML: 
    kbuilder.add( ResourceFactory.newUrlResource( url ), ResourceType.CHANGE_SET );
    Copy to Clipboard Toggle word wrap
Report a bug

5.3.9. ChangeSet XML with Resource Configuration Example
复制链接

This example shows you how to incorporate resource configuration in your ChangeSet: 
 <change-set xmlns='http://drools.org/drools-5.0/change-set'
             xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
             xs:schemaLocation='http://drools.org/drools-5.0/change-set.xsd http://anonsvn.jboss.org/repos/labs/labs/drools/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
  <add>
       <resource source='http:org/domain/myrules.drl' type='DRL' />
       <resource source='classpath:data/IntegrationExampleTest.xls' type="DTABLE">
           <decisiontable-conf input-type="XLS" worksheet-name="Tables_2" />
       </resource>
   </add>
 </change-set>
Copy to Clipboard Toggle word wrap
Report a bug

5.3.10. ChangeSet XML and Directories
复制链接

The following code allows you to add a directory's contents to the ChangeSet: 
<change-set xmlns='http://drools.org/drools-5.0/change-set'
            xmlns:xs='http://www.w3.org/2001/XMLSchema-instance'
            xs:schemaLocation='http://drools.org/drools-5.0/change-set.xsd http://anonsvn.jboss.org/repos/labs/labs/drools/trunk/drools-api/src/main/resources/change-set-1.0.0.xsd' >
   <add>
      <resource source='file:/projects/myproject/myrules' type='DRL' />
   </add>
</change-set>
Copy to Clipboard Toggle word wrap

Note

Currently it is expected that all resources in that folder are of the same type. If you use the Knowledge Agent it will provide a continuous scanning for added, modified or removed resources and rebuild the cached Knowledge Base.
Report a bug
返回顶部
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2025 Red Hat