此内容没有您所选择的语言版本。
Appendix B. Fence Device Parameters
This appendix provides tables with parameter descriptions of fence devices.
Note
Certain fence devices have an optional parameter. The parameter allows specifying that a fence-device password is supplied from a script rather than from the parameter. Using the parameter supersedes the parameter, allowing passwords to not be visible in the cluster configuration file (
/etc/cluster/cluster.conf).
| Field | Description |
|---|---|
| Name | A name for the APC device connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Switch (optional) | The switch number for the APC switch that connects to the node when you have multiple daisy-chained switches. |
| Use SSH | (Rhel 4.8 and later) Indicates that system will use SSH to access the device. |
| Field | Description |
|---|---|
| Name | A name for the Brocade device connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Field | Description |
|---|---|
| Name | A name for the Bull PAP system connected to the cluster. |
| IP Address | The IP address assigned to the PAP console. |
| Login | The login name used to access the PAP console. |
| Password | The password used to authenticate the connection to the PAP console. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Domain | Domain of the Bull PAP system to power cycle. |
| Field | Description |
|---|---|
| Name | The name assigned to the DRAC. |
| IP Address | The IP address assigned to the DRAC. |
| Login | The login name used to access the DRAC. |
| Password | The password used to authenticate the connection to the DRAC. |
| Module name | (optional) The module name for the DRAC when you have multiple DRAC modules. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Use SSH (DRAC5 only) | (Rhel 4.8 and later) Indicates that system will use SSH to access the device. |
| Field | Description |
|---|---|
| Name | A name for the BladeFrame device connected to the cluster. |
| CServer | The hostname (and optionally the username in the form of username@hostname) assigned to the device. Refer to the fence_egenera(8) man page for more information. |
| ESH Path (optional) | The path to the esh command on the cserver (default is /opt/pan- mgr/bin/esh) |
| lpan | The logical process area network (LPAN) of the device. |
| pserver | The processing blade (pserver) name of the device. |
| Field | Description |
|---|---|
| Name | A name for the RSB to use as a fence device. |
| Hostname | The hostname assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Field | Description |
|---|---|
| Name | A name for the GNBD device used to fence the cluster. Note that the GFS server must be accessed via GNBD for cluster node fencing support. |
| Server | The hostname of the server to fence the client from, in either IP address or hostname form. For multiple hostnames, separate each hostname with a space. |
| IP address | The cluster name of the node to be fenced. Refer to the fence_gnbd(8) man page for more information. |
| Field | Description |
|---|---|
| Name | A name for the server with HP iLO support. |
| Hostname | The hostname assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Use SSH | (Rhel 4.8 and later) Indicates that system will use SSH to access the device. |
| Field | Description |
|---|---|
| Name | A name for the IBM BladeCenter device connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Blade | The blade of the device. |
| Use SSH | (Rhel 4.8 and later) Indicates that system will use SSH to access the device. |
| Field | Description |
|---|---|
| Name | A name for the RSA device connected to the cluster. |
| Hostname | The hostname assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Field | Description |
|---|---|
| Name | A name for the IPMI LAN device connected to the cluster. |
| IP Address | The IP address assigned to the IPMI port. |
| Login | The login name of a user capable of issuing power on/off commands to the given IPMI port. |
| Password | The password used to authenticate the connection to the IPMI port. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Authentication Type | none, password, md2, or md5 |
| Use Lanplus | True or 1. If blank, then value is False. |
| Field | Description |
|---|---|
| Name | A name for the LPAR to use as a fence device. |
| Hostname | The hostname assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Partition | Name of LPAR partition to use as a fence device when there are multiple LPARs. |
| hmc-version | Version 3 or 4. A value of 4 is the default. |
| Managed | Name of the managed system. |
| Field | Description |
|---|---|
| Name | A name to assign the Manual fencing agent. Refer to the fence_manual(8) man page for more information. |
Warning
Manual fencing is not supported for production environments.
| Field | Description |
|---|---|
| Name | A name for the McData device connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Field | Description |
|---|---|
| Name | A name for the SANBox2 device connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Login | The login name used to access the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Field | Description |
|---|---|
| Name | A name for the WTI RPS-10 power switch connected to the cluster. |
| Device Name | The device name of the device the switch is connected to on the controlling host (for example, /dev/ttys2). |
| Port | The switch outlet number. |
| Field | Description |
|---|---|
| Name | A name for the SCSI fence device. |
| Node name | Name of the node to be fenced. Refer to the fence_scsi(8) man page for more information. |
| Field | Description |
|---|---|
| Name | Name of the virtual machine fencing device. |
| Domain | Unique domain name of the guest to be fenced. |
| Field | Description |
|---|---|
| Name | A name for the Vixel switch connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Field | Description |
|---|---|
| Name | A name for the WTI power switch connected to the cluster. |
| IP Address | The IP address assigned to the device. |
| Password | The password used to authenticate the connection to the device. |
| Password Script (optional) | The script that supplies a password for access to the fence device. Using this supersedes the parameter. |
| Port | The switch outlet number. |
| Use SSH | (Rhel 4.8 and later) Indicates that system will use SSH to access the device. |
