227.7. 模拟现有端点

可作为 Camel 2.7 提供

Camel 现在允许您自动模拟 Camel 路由中的现有端点。

注意

它的工作原理是 端点仍然在操作中。另一种情况是，注入 Mock 端点并接收消息，然后将消息委派给目标端点。您可以将此操作视为截获类型，并委派或端点监听程序。

假设您有以下给定的路由：

Route（路由）

@Override
protected RouteBuilder createRouteBuilder() throws Exception {
    return new RouteBuilder() {
        @Override
        public void configure() throws Exception {
            from("direct:start").to("direct:foo").to("log:foo").to("mock:result");

            from("direct:foo").transform(constant("Bye World"));
        }
    };
}

@Override
protected RouteBuilder createRouteBuilder() throws Exception {
    return new RouteBuilder() {
        @Override
        public void configure() throws Exception {
            from("direct:start").to("direct:foo").to("log:foo").to("mock:result");

            from("direct:foo").transform(constant("Bye World"));
        }
    };
}

Copy to Clipboard

Toggle word wrap

然后，您可以使用 Camel 中的 建议 带功能来模拟来自单元测试给定路由中的所有端点，如下所示：

提供模拟所有端点的建议

public void testAdvisedMockEndpoints() throws Exception {
       // advice the first route using the inlined AdviceWith route builder
       // which has extended capabilities than the regular route builder
       context.getRouteDefinitions().get(0).adviceWith(context, new AdviceWithRouteBuilder() {
           @Override
           public void configure() throws Exception {
               // mock all endpoints
               mockEndpoints();
           }
       });

       getMockEndpoint("mock:direct:start").expectedBodiesReceived("Hello World");
       getMockEndpoint("mock:direct:foo").expectedBodiesReceived("Hello World");
       getMockEndpoint("mock:log:foo").expectedBodiesReceived("Bye World");
       getMockEndpoint("mock:result").expectedBodiesReceived("Bye World");

       template.sendBody("direct:start", "Hello World");

       assertMockEndpointsSatisfied();

       // additional test to ensure correct endpoints in registry
       assertNotNull(context.hasEndpoint("direct:start"));
       assertNotNull(context.hasEndpoint("direct:foo"));
       assertNotNull(context.hasEndpoint("log:foo"));
       assertNotNull(context.hasEndpoint("mock:result"));
       // all the endpoints was mocked
       assertNotNull(context.hasEndpoint("mock:direct:start"));
       assertNotNull(context.hasEndpoint("mock:direct:foo"));
       assertNotNull(context.hasEndpoint("mock:log:foo"));
   }

public void testAdvisedMockEndpoints() throws Exception {
       // advice the first route using the inlined AdviceWith route builder
       // which has extended capabilities than the regular route builder
       context.getRouteDefinitions().get(0).adviceWith(context, new AdviceWithRouteBuilder() {
           @Override
           public void configure() throws Exception {
               // mock all endpoints
               mockEndpoints();
           }
       });

       getMockEndpoint("mock:direct:start").expectedBodiesReceived("Hello World");
       getMockEndpoint("mock:direct:foo").expectedBodiesReceived("Hello World");
       getMockEndpoint("mock:log:foo").expectedBodiesReceived("Bye World");
       getMockEndpoint("mock:result").expectedBodiesReceived("Bye World");

       template.sendBody("direct:start", "Hello World");

       assertMockEndpointsSatisfied();

       // additional test to ensure correct endpoints in registry
       assertNotNull(context.hasEndpoint("direct:start"));
       assertNotNull(context.hasEndpoint("direct:foo"));
       assertNotNull(context.hasEndpoint("log:foo"));
       assertNotNull(context.hasEndpoint("mock:result"));
       // all the endpoints was mocked
       assertNotNull(context.hasEndpoint("mock:direct:start"));
       assertNotNull(context.hasEndpoint("mock:direct:foo"));
       assertNotNull(context.hasEndpoint("mock:log:foo"));
   }

Copy to Clipboard

Toggle word wrap

请注意，模拟端点被赋予了 URI Vulnerability:& lt;endpoint>，如 模拟：direct:foo。INFO 级别的 Camel 日志是模拟的端点：

INFO  Adviced endpoint [direct://foo] with mock endpoint [mock:direct:foo]

INFO  Adviced endpoint [direct://foo] with mock endpoint [mock:direct:foo]

Copy to Clipboard

Toggle word wrap

注意

模拟端点不使用参数
端点，模拟它们的参数会被剥离。例如，端点 log:foo?showAll=true 将模拟到以下端点 模拟：log:foo。请注意，参数已被删除。

它还可能仅使用模式模拟某些端点。例如，模拟您 执行 的所有日志端点，如下所示：

提供只使用模式的模拟日志端点 的建议

public void testAdvisedMockEndpointsWithPattern() throws Exception {
    // advice the first route using the inlined AdviceWith route builder
    // which has extended capabilities than the regular route builder
    context.getRouteDefinitions().get(0).adviceWith(context, new AdviceWithRouteBuilder() {
        @Override
        public void configure() throws Exception {
            // mock only log endpoints
            mockEndpoints("log*");
        }
    });

    // now we can refer to log:foo as a mock and set our expectations
    getMockEndpoint("mock:log:foo").expectedBodiesReceived("Bye World");

    getMockEndpoint("mock:result").expectedBodiesReceived("Bye World");

    template.sendBody("direct:start", "Hello World");

    assertMockEndpointsSatisfied();

    // additional test to ensure correct endpoints in registry
    assertNotNull(context.hasEndpoint("direct:start"));
    assertNotNull(context.hasEndpoint("direct:foo"));
    assertNotNull(context.hasEndpoint("log:foo"));
    assertNotNull(context.hasEndpoint("mock:result"));
    // only the log:foo endpoint was mocked
    assertNotNull(context.hasEndpoint("mock:log:foo"));
    assertNull(context.hasEndpoint("mock:direct:start"));
    assertNull(context.hasEndpoint("mock:direct:foo"));
}

public void testAdvisedMockEndpointsWithPattern() throws Exception {
    // advice the first route using the inlined AdviceWith route builder
    // which has extended capabilities than the regular route builder
    context.getRouteDefinitions().get(0).adviceWith(context, new AdviceWithRouteBuilder() {
        @Override
        public void configure() throws Exception {
            // mock only log endpoints
            mockEndpoints("log*");
        }
    });

    // now we can refer to log:foo as a mock and set our expectations
    getMockEndpoint("mock:log:foo").expectedBodiesReceived("Bye World");

    getMockEndpoint("mock:result").expectedBodiesReceived("Bye World");

    template.sendBody("direct:start", "Hello World");

    assertMockEndpointsSatisfied();

    // additional test to ensure correct endpoints in registry
    assertNotNull(context.hasEndpoint("direct:start"));
    assertNotNull(context.hasEndpoint("direct:foo"));
    assertNotNull(context.hasEndpoint("log:foo"));
    assertNotNull(context.hasEndpoint("mock:result"));
    // only the log:foo endpoint was mocked
    assertNotNull(context.hasEndpoint("mock:log:foo"));
    assertNull(context.hasEndpoint("mock:direct:start"));
    assertNull(context.hasEndpoint("mock:direct:foo"));
}

Copy to Clipboard

Toggle word wrap

支持的模式可以是通配符或正则表达式。有关此问题的详细信息，请参阅 Intercept，及其与 Camel 使用的相同匹配功能。

注意

模拟端点时会导致在消息到达模拟时复制消息。
这意味着 Camel 将使用更多内存。当您在很多消息中发送时，可能不适用。

返回顶部

227.7. 模拟现有端点

学习

尝试、购买和销售

社区

关于红帽文档

让开源更具包容性

關於紅帽

Theme

Red Hat legal and privacy links

Red Hat legal and privacy links