红帽全球峰会此内容没有您所选择的语言版本。
15.4. Configuring the Log Level
Every log message has a log level associated with it. The levels, in descending order, are CRITICAL, ERROR, WARNING, INFO, DEBUG, and TRACE. Red Hat Storage can be configured to generate log messages only for certain log levels. Only those messages that have log levels above or equal to the configured log level are logged.
For example, if the log level is set to info, only
critical, error, warning, and info messages are logged.
The components can be configured to log at one of the following levels:
- CRITICAL
- ERROR
- WARNING
- INFO
- DEBUG
- TRACE
Important
Setting the log level to TRACE or DEBUG would generate excessive log messages and lead to the disks running out of memory.
To configure the log level on bricks
#gluster volume set VOLNAME diagnostics.brick-log-level <value>Example 15.7. Set the log level to warning on a brick
#gluster volume set testvol diagnostics.brick-log-level WARNING
To configure the syslog level on bricks
#gluster volume set VOLNAME diagnostics.brick-sys-log-level <value>Example 15.8. Set the syslog level to warning on a brick
#gluster volume set testvol diagnostics.brick-sys-log-level WARNING
To configure the log level on clients
#gluster volume set VOLNAME diagnostics.client-log-level <value>Example 15.9. Set the log level to error on a client
#gluster volume set testvol diagnostics.client-log-level ERROR
To configure the syslog level on clients
#gluster volume set VOLNAME diagnostics.client-sys-log-level <value>Example 15.10. Set the syslog level to error on a client
#gluster volume set testvol diagnostics.client-sys-log-level ERROR
To configure the log level on
glusterd
#glusterd --log-level <value>Example 15.11. Set the log level to warning on glusterd
#glusterd --log-level WARNING
To configure the log level for a specific gluster command
gluster --log-level=ERROR VOLNAME peer probe HOSTNAMEExample 15.12. Set the CLI log level to ERROR for the volume statuscommand
# gluster --log-level=ERROR volume status
Verify the log level for a specific gluster command
#gluster --log-level ERROR volume status
'%20d='M201.5%20305.5c-13.8%200-24.9-11.1-24.9-24.6%200-13.8%2011.1-24.9%2024.9-24.9%2013.6%200%2024.6%2011.1%2024.6%2024.9%200%2013.6-11.1%2024.6-24.6%2024.6zM504%20256c0%20137-111%20248-248%20248S8%20393%208%20256%20119%208%20256%208s248%20111%20248%20248zm-132.3-41.2c-9.4%200-17.7%203.9-23.8%2010-22.4-15.5-52.6-25.5-86.1-26.6l17.4-78.3%2055.4%2012.5c0%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.3%2024.9-24.9s-11.1-24.9-24.9-24.9c-9.7%200-18%205.8-22.1%2013.8l-61.2-13.6c-3-.8-6.1%201.4-6.9%204.4l-19.1%2086.4c-33.2%201.4-63.1%2011.3-85.5%2026.8-6.1-6.4-14.7-10.2-24.1-10.2-34.9%200-46.3%2046.9-14.4%2062.8-1.1%205-1.7%2010.2-1.7%2015.5%200%2052.6%2059.2%2095.2%20132%2095.2%2073.1%200%20132.3-42.6%20132.3-95.2%200-5.3-.6-10.8-1.9-15.8%2031.3-16%2019.8-62.5-14.9-62.5zM302.8%20331c-18.2%2018.2-76.1%2017.9-93.6%200-2.2-2.2-6.1-2.2-8.3%200-2.5%202.5-2.5%206.4%200%208.6%2022.8%2022.8%2087.3%2022.8%20110.2%200%202.5-2.2%202.5-6.1%200-8.6-2.2-2.2-6.1-2.2-8.3%200zm7.7-75c-13.6%200-24.6%2011.1-24.6%2024.9%200%2013.6%2011.1%2024.6%2024.6%2024.6%2013.8%200%2024.9-11.1%2024.9-24.6%200-13.8-11-24.9-24.9-24.9z'/%3e%3c/svg%3e){kind=small}