Red Hat Summit 红帽全球峰会支持控制台（Console）开发人员开始试用联系人

此内容没有您所选择的语言版本。

Chapter 9. Updating OpenShift Container Storage

Use this procedure to enable automatic update approval for updating OpenShift Container Storage operator in OpenShift Container Platform.

Prerequisites

  • Update the OpenShift Container Platform cluster to the latest stable release of version 4.3, see Updating Clusters.

  • If you were already operating on OpenShift Container Platform version 4.3, and you are updating OpenShift Container Storage from version 4.2 to version 4.3, switch the channel from stable-4.2 to stable-4.3. For details about channels, see OpenShift Container Platform upgrade channels and releases.

    Note

    You are required to switch channels only when you are updating minor versions (for example, updating from 4.2 to 4.3) and not when updating between batch updates of 4.3 (for example, updating from 4.3.0 to 4.3.1).

  • Ensure that all OpenShift Container Storage nodes are in Ready status.
  • Under Persistent Storage in Health card, confirm that the Ceph cluster is healthy and data is resilient.

Procedure

  1. Log in to OpenShift Web Console.
  2. Click Operators Installed Operators
  3. Select the openshift-storage project.
  4. Click on the OpenShift Container Storage operator name.
  5. Click Subscription tab and click the link under Approval.
  6. Select Automatic (default) and click Save.

  7. Perform one of the following depending on the Upgrade Status:

    • Upgrade Status shows requires approval.

      1. Click on the Install Plan link.
      2. On the InstallPlan Details page, click Preview Install Plan.
      3. Review the install plan and click Approve.
      4. Wait for the Status to change from Unknown to Created.
      5. Click Operators Installed Operators
      6. Select the openshift-storage project.
      7. Wait for the Status to change to Up to date

    • Upgrade Status does not show requires approval:

      1. Wait for the update to initiate. This may take up to 20 minutes.
      2. Click Operators Installed Operators
      3. Select the openshift-storage project.
      4. Wait for the Status to change to Up to date

Verification steps

  1. Click Dashboard OCS PV tab and in Status card confirm that the Ceph cluster has a green tick mark indicating it is healthy.
  2. Click Operators Installed Operators OpenShift Container Storage Operator.
  3. Under Storage Cluster, verify that the cluster service status in Ready.
  4. If verification steps fail, kindly contact Red Hat Support.

9.2. Manually updating OpenShift Container Storage operator
复制链接

Use this procedure to update OpenShift Container Storage operator by providing manual approval to the install plan.

Prerequisites

  • Update the OpenShift Container Platform cluster to the latest stable release of version 4.3, see Updating Clusters.

  • If you were already operating on OpenShift Container Platform version 4.3, and you are updating OpenShift Container Storage from version 4.2 to version 4.3, switch the channel from stable-4.2 to stable-4.3. For details about channels, see OpenShift Container Platform upgrade channels and releases.

    Note

    You are required to switch channels only when you are updating minor versions (for example, updating from 4.2 to 4.3) and not when updating between batch updates of 4.3 (for example, updating from 4.3.0 to 4.3.1).

  • Ensure that all OpenShift Container Storage nodes are in Ready status.
  • Under Persistent Storage in Health card, confirm that the Ceph cluster is healthy and data is resilient.

Procedure

  1. Log in to OpenShift Web Console.
  2. Click Operators Installed Operators
  3. Select the openshift-storage project.
  4. Click Subscription tab and click the link under Approval.
  5. Select Manual and click Save.
  6. Wait for the Upgrade Status to change to Upgrading.
  7. If the Upgrade Status shows requires approval, click on requires approval.
  8. On the InstallPlan Details page, click Preview Install Plan.
  9. Review the install plan and click Approve.
  10. Wait for the Status to change from Unknown to Created.
  11. Click Operators Installed Operators
  12. Select the openshift-storage project.
  13. Wait for the Status to change to Up to date

Verification steps

  1. Click Dashboard OCS PV tab and in Status card confirm that the Ceph cluster has a green tick mark indicating it is healthy.
  2. Click Operators Installed Operators OpenShift Container Storage Operator.
  3. Under Storage Cluster, verify that the cluster service status in Ready.
  4. If verification steps fail, kindly contact Red Hat Support.
Red Hat logoGithubredditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。 了解我们当前的更新.

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

Theme

© 2026 Red Hat返回顶部