Chapter 64. secret

URI

The uri reference for the secret

-h, --help

Show this help message and exit

--service-type-name SERVICE_TYPE_NAME, -s SERVICE_TYPE_NAME

The service that will consume the secret

--resource-type RESOURCE_TYPE, -t RESOURCE_TYPE

The type of resource that will consume the secret

--resource-id RESOURCE_ID, -i RESOURCE_ID

The id of the resource that will consume the secret

URI

The uri reference for the secret

-h, --help

Show this help message and exit

--service-type-name SERVICE_TYPE_NAME, -s SERVICE_TYPE_NAME

The service that is consuming the secret

--resource-type RESOURCE_TYPE, -t RESOURCE_TYPE

The type of resource that is consuming the secret

--resource-id RESOURCE_ID, -i RESOURCE_ID

The id of the resource that is consuming the secret

URI

The uri reference for the secret

-h, --help

Show this help message and exit

--limit LIMIT, -l LIMIT

Specify the limit to the number of items to list per page (default: 10; maximum: 100)

--offset OFFSET, -o OFFSET

Specify the page offset (default: 0)

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--name NAME, -n NAME

A human-friendly name.

--type TYPE

Type of container to create (default: generic).

--secret SECRET, -s SECRET

One secret to store in a container (can be set multiple times). Example: --secret "private_key=https://url.test/v1/secrets/1-2-3-4"

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the container

-h, --help

Show this help message and exit

URI

The uri reference for the container.

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--limit LIMIT, -l LIMIT

Specify the limit to the number of items to list per page (default: 10; maximum: 100)

--offset OFFSET, -o OFFSET

Specify the page offset (default: 0)

--name NAME, -n NAME

Specify the container name (default: none)

--type TYPE, -t TYPE

Specify the type filter for the list (default: none).

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret

-h, --help

Show this help message and exit

--force, -f

If specified, forces the deletion of secrets that have consumers.

URI

The uri reference for the secret.

-h, --help

Show this help message and exit

--decrypt, -d

If specified, retrieve the unencrypted secret data.

--payload, -p

If specified, retrieve the unencrypted secret data.

--file <filename>, -F <filename>

If specified, save the payload to a new file with the given filename.

--payload_content_type PAYLOAD_CONTENT_TYPE, -t PAYLOAD_CONTENT_TYPE

The content type of the decrypted secret (default: text/plain).

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--limit LIMIT, -l LIMIT

Specify the limit to the number of items to list per page (default: 10; maximum: 100)

--offset OFFSET, -o OFFSET

Specify the page offset (default: 0)

--name NAME, -n NAME

Specify the secret name (default: none)

--algorithm ALGORITHM, -a ALGORITHM

The algorithm filter for the list(default: none).

--bit-length BIT_LENGTH, -b BIT_LENGTH

The bit length filter for the list (default: 0).

--mode MODE, -m MODE

The algorithm mode filter for the list (default: None).

--secret-type SECRET_TYPE, -s SECRET_TYPE

Specify the secret type (default: none).

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

type

The type of the order (key, asymmetric, certificate) to create.

-h, --help

Show this help message and exit

--name NAME, -n NAME

A human-friendly name.

--algorithm ALGORITHM, -a ALGORITHM

The algorithm to be used with the requested key (default: aes).

--bit-length BIT_LENGTH, -b BIT_LENGTH

The bit length of the requested secret key (default: 256).

--mode MODE, -m MODE

The algorithm mode to be used with the requested key (default: cbc).

--payload-content-type PAYLOAD_CONTENT_TYPE, -t PAYLOAD_CONTENT_TYPE

The type/format of the secret to be generated (default: application/octet-stream).

--expiration EXPIRATION, -x EXPIRATION

The expiration time for the secret in iso 8601 format.

--request-type REQUEST_TYPE

The type of the certificate request.

--subject-dn SUBJECT_DN

The subject of the certificate.

--source-container-ref SOURCE_CONTAINER_REF

The source of the certificate when using stored-key requests.

--ca-id CA_ID

The identifier of the ca to use for the certificate request.

--profile PROFILE

The profile of certificate to use.

--request-file REQUEST_FILE

The file containing the csr.

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the order

-h, --help

Show this help message and exit

URI

The uri reference order.

-h, --help

Show this help message and exit

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--limit LIMIT, -l LIMIT

Specify the limit to the number of items to list per page (default: 10; maximum: 100)

--offset OFFSET, -o OFFSET

Specify the page offset (default: 0)

-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending

Sort the column(s) in ascending order

--sort-descending

Sort the column(s) in descending order

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

--noindent

Whether to disable indenting the json

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

-h, --help

Show this help message and exit

--name NAME, -n NAME

A human-friendly name.

--secret-type SECRET_TYPE, -s SECRET_TYPE

The secret type; must be one of symmetric, public, private, certificate, passphrase, opaque (default)

--payload-content-type PAYLOAD_CONTENT_TYPE, -t PAYLOAD_CONTENT_TYPE

The type/format of the provided secret data; "text/plain" is assumed to be UTF-8; required when --payload is supplied.

--payload-content-encoding PAYLOAD_CONTENT_ENCODING, -e PAYLOAD_CONTENT_ENCODING

Required if --payload-content-type is "application/octet-stream".

--algorithm ALGORITHM, -a ALGORITHM

The algorithm (default: aes).

--bit-length BIT_LENGTH, -b BIT_LENGTH

The bit length (default: 256).

--mode MODE, -m MODE

The algorithm mode; used only for reference (default: cbc)

--expiration EXPIRATION, -x EXPIRATION

The expiration time for the secret in iso 8601 format.

--payload PAYLOAD, -p PAYLOAD

The unencrypted secret data.

--file <filename>, -F <filename>

File containing the secret payload

-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated to show multiple columns

--noindent

Whether to disable indenting the json

--prefix PREFIX

Add a prefix to all variable names

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--print-empty

Print empty table if there is no data to show.

URI

The uri reference for the secret.

payload

The unencrypted secret

-h, --help

Show this help message and exit