搜索
支持控制台（Console）开发人员开始试用联系人

第 1 章 Service Mesh 1.x

download PDF

1.1. Service Mesh Release Notes

1.1.1. Red Hat OpenShift Service Mesh overview

Red Hat OpenShift Service Mesh is a platform that provides behavioral insight and operational control over the service mesh, providing a uniform way to connect, secure, and monitor microservice applications.

The term service mesh describes the network of microservices that make up applications in a distributed microservice architecture and the interactions between those microservices. As a service mesh grows in size and complexity, it can become harder to understand and manage.

Based on the open source Istio project, Red Hat OpenShift Service Mesh adds a transparent layer on existing distributed applications without requiring any changes to the service code. You add Red Hat OpenShift Service Mesh support to services by deploying a special sidecar proxy throughout your environment that intercepts all network communication between microservices. You configure and manage the service mesh using the control plane features.

Red Hat OpenShift Service Mesh provides an easy way to create a network of deployed services that provides discovery, load balancing, service-to-service authentication, failure recovery, metrics, and monitoring. A service mesh also provides more complex operational functionality, including A/B testing, canary releases, rate limiting, access control, and end-to-end authentication.

1.1.2. Getting support

If you experience difficulty with a procedure described in this documentation, or with OpenShift Container Platform in general, visit the Red Hat Customer Portal. From the Customer Portal, you can:

  • Search or browse through the Red Hat Knowledgebase of articles and solutions relating to Red Hat products.
  • Submit a support case to Red Hat Support.
  • Access other product documentation.

To identify issues with your cluster, you can use Insights in Red Hat OpenShift Cluster Manager. Insights provides details about issues and, if available, information on how to solve a problem.

If you have a suggestion for improving this documentation or have found an error, please submit a Bugzilla report against the OpenShift Container Platform product for the Documentation component. Please provide specific details, such as the section name and OpenShift Container Platform version.

When opening a support case, it is helpful to provide debugging information about your cluster to Red Hat Support.

The must-gather tool enables you to collect diagnostic information about your OpenShift Container Platform cluster, including virtual machines and other data related to Red Hat OpenShift Service Mesh.

For prompt support, supply diagnostic information for both OpenShift Container Platform and Red Hat OpenShift Service Mesh.

1.1.2.1. About the must-gather tool

The oc adm must-gather CLI command collects the information from your cluster that is most likely needed for debugging issues, such as:

  • Resource definitions
  • Audit logs
  • Service logs

You can specify one or more images when you run the command by including the --image argument. When you specify an image, the tool collects data related to that feature or product.

When you run oc adm must-gather, a new pod is created on the cluster. The data is collected on that pod and saved in a new directory that starts with must-gather.local. This directory is created in the current working directory.

1.1.2.2. Prerequisites

  • Access to the cluster as a user with the cluster-admin role.
  • The OpenShift Container Platform CLI (oc) installed.

1.1.2.3. About collecting service mesh data

You can use the oc adm must-gather CLI command to collect information about your cluster, including features and objects associated with Red Hat OpenShift Service Mesh.

To collect Red Hat OpenShift Service Mesh data with must-gather, you must specify the Red Hat OpenShift Service Mesh image. 

$ oc adm must-gather --image=registry.redhat.io/openshift-service-mesh/istio-must-gather-rhel8

To collect Red Hat OpenShift Service Mesh data for a specific control plane namespace with must-gather, you must specify the Red Hat OpenShift Service Mesh image and namespace. In this example, replace <namespace> with your control plane namespace, such as istio-system. 

$ oc adm must-gather --image=registry.redhat.io/openshift-service-mesh/istio-must-gather-rhel8 gather <namespace>

1.1.3. Red Hat OpenShift Service Mesh supported configurations

The following are the only supported configurations for the Red Hat OpenShift Service Mesh:

  • Red Hat OpenShift Container Platform version 4.x.
注意

OpenShift Online and OpenShift Dedicated are not supported for Red Hat OpenShift Service Mesh.

  • The deployment must be contained to a single OpenShift Container Platform cluster that is not federated.
  • This release of Red Hat OpenShift Service Mesh is only available on OpenShift Container Platform x86_64.
  • This release only supports configurations where all Service Mesh components are contained in the OpenShift cluster in which it operates. It does not support management of microservices that reside outside of the cluster, or in a multi-cluster scenario.
  • This release only supports configurations that do not integrate external services such as virtual machines.

1.1.3.1. Supported configurations for Kiali on Red Hat OpenShift Service Mesh

  • The Kiali observability console is only supported on the two most recent releases of the Chrome, Edge, Firefox, or Safari browsers.

1.1.3.2. Supported Mixer adapters

  • This release only supports the following Mixer adapter:

    • 3scale Istio Adapter

1.1.4. New Features

Red Hat OpenShift Service Mesh provides a number of key capabilities uniformly across a network of services:

  • Traffic Management - Control the flow of traffic and API calls between services, make calls more reliable, and make the network more robust in the face of adverse conditions.
  • Service Identity and Security - Provide services in the mesh with a verifiable identity and provide the ability to protect service traffic as it flows over networks of varying degrees of trustworthiness.
  • Policy Enforcement - Apply organizational policy to the interaction between services, ensure access policies are enforced and resources are fairly distributed among consumers. Policy changes are made by configuring the mesh, not by changing application code.
  • Telemetry - Gain understanding of the dependencies between services and the nature and flow of traffic between them, providing the ability to quickly identify issues.

1.1.4.1. Component versions included in Red Hat OpenShift Service Mesh version 1.1.16

ComponentVersion

Istio

1.4.8

Jaeger

1.17.8

Kiali

1.12.16

3scale Istio Adapter

1.0.0

1.1.4.2. New features Red Hat OpenShift Service Mesh 1.1.16

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.3. New features Red Hat OpenShift Service Mesh 1.1.15

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.4. New features Red Hat OpenShift Service Mesh 1.1.14

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

重要

There are manual steps that must be completed to address CVE-2021-29492 and CVE-2021-31920.

1.1.4.4.1. Manual updates required by CVE-2021-29492 and CVE-2021-31920

Istio contains a remotely exploitable vulnerability where an HTTP request path with multiple slashes or escaped slash characters (%2F` or %5C`) could potentially bypass an Istio authorization policy when path-based authorization rules are used.

For example, assume an Istio cluster administrator defines an authorization DENY policy to reject the request at path /admin. A request sent to the URL path //admin will NOT be rejected by the authorization policy.

According to RFC 3986, the path //admin with multiple slashes should technically be treated as a different path from the /admin. However, some backend services choose to normalize the URL paths by merging multiple slashes into a single slash. This can result in a bypass of the authorization policy (//admin does not match /admin), and a user can access the resource at path /admin in the backend; this would represent a security incident.

Your cluster is impacted by this vulnerability if you have authorization policies using ALLOW action + notPaths field or DENY action + paths field patterns. These patterns are vulnerable to unexpected policy bypasses.

Your cluster is NOT impacted by this vulnerability if:

  • You don’t have authorization policies.
  • Your authorization policies don’t define paths or notPaths fields.
  • Your authorization policies use ALLOW action + paths field or DENY action + notPaths field patterns. These patterns could only cause unexpected rejection instead of policy bypasses. The upgrade is optional for these cases.
注意

The Red Hat OpenShift Service Mesh configuration location for path normalization is different from the Istio configuration.

1.1.4.4.2. Updating the path normalization configuration

Istio authorization policies can be based on the URL paths in the HTTP request. Path normalization, also known as URI normalization, modifies and standardizes the incoming requests' paths so that the normalized paths can be processed in a standard way. Syntactically different paths may be equivalent after path normalization.

Istio supports the following normalization schemes on the request paths before evaluating against the authorization policies and routing the requests:

表 1.1. Normalization schemes
OptionDescriptionExampleNotes

NONE

No normalization is done. Anything received by Envoy will be forwarded exactly as-is to any backend service.

../%2Fa../b is evaluated by the authorization policies and sent to your service.

This setting is vulnerable to CVE-2021-31920.

BASE

This is currently the option used in the default installation of Istio. This applies the normalize_path option on Envoy proxies, which follows RFC 3986 with extra normalization to convert backslashes to forward slashes.

/a/../b is normalized to /b. \da is normalized to /da.

This setting is vulnerable to CVE-2021-31920.

MERGE_SLASHES

Slashes are merged after the BASE normalization.

/a//b is normalized to /a/b.

Update to this setting to mitigate CVE-2021-31920.

DECODE_AND_MERGE_SLASHES

The strictest setting when you allow all traffic by default. This setting is recommended, with the caveat that you must thoroughly test your authorization policies routes. Percent-encoded slash and backslash characters (%2F, %2f, %5C and %5c) are decoded to / or \, before the MERGE_SLASHES normalization.

/a%2fb is normalized to /a/b.

Update to this setting to mitigate CVE-2021-31920. This setting is more secure, but also has the potential to break applications. Test your applications before deploying to production.

The normalization algorithms are conducted in the following order:

  1. Percent-decode %2F, %2f, %5C and %5c.
  2. The RFC 3986 and other normalization implemented by the normalize_path option in Envoy.
  3. Merge slashes.
警告

While these normalization options represent recommendations from HTTP standards and common industry practices, applications may interpret a URL in any way it chooses to. When using denial policies, ensure that you understand how your application behaves.

1.1.4.4.3. Path normalization configuration examples

Ensuring Envoy normalizes request paths to match your backend services' expectations is critical to the security of your system. The following examples can be used as a reference for you to configure your system. The normalized URL paths, or the original URL paths if NONE is selected, will be:

  1. Used to check against the authorization policies.
  2. Forwarded to the backend application.
表 1.2. Configuration examples
If your application…​Choose…​

Relies on the proxy to do normalization

BASE, MERGE_SLASHES or DECODE_AND_MERGE_SLASHES

Normalizes request paths based on RFC 3986 and does not merge slashes.

BASE

Normalizes request paths based on RFC 3986 and merges slashes, but does not decode percent-encoded slashes.

MERGE_SLASHES

Normalizes request paths based on RFC 3986, decodes percent-encoded slashes, and merges slashes.

DECODE_AND_MERGE_SLASHES

Processes request paths in a way that is incompatible with RFC 3986.

NONE

1.1.4.4.4. Configuring your SMCP for path normalization

To configure path normalization for Red Hat OpenShift Service Mesh, specify the following in your ServiceMeshControlPlane. Use the configuration examples to help determine the settings for your system.

SMCP v1 pathNormalization

spec:
  global:
    pathNormalization: <option>

1.1.4.5. New features Red Hat OpenShift Service Mesh 1.1.13

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.6. New features Red Hat OpenShift Service Mesh 1.1.12

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.7. New features Red Hat OpenShift Service Mesh 1.1.11

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.8. New features Red Hat OpenShift Service Mesh 1.1.10

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.9. New features Red Hat OpenShift Service Mesh 1.1.9

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.10. New features Red Hat OpenShift Service Mesh 1.1.8

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.11. New features Red Hat OpenShift Service Mesh 1.1.7

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.12. New features Red Hat OpenShift Service Mesh 1.1.6

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.13. New features Red Hat OpenShift Service Mesh 1.1.5

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

This release also added support for configuring cipher suites.

1.1.4.14. New features Red Hat OpenShift Service Mesh 1.1.4

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

注意

There are manual steps that must be completed to address CVE-2020-8663.

1.1.4.14.1. Manual updates required by CVE-2020-8663

The fix for CVE-2020-8663: envoy: Resource exhaustion when accepting too many connections added a configurable limit on downstream connections. The configuration option for this limit must be configured to mitigate this vulnerability.

重要

These manual steps are required to mitigate this CVE whether you are using the 1.1 version or the 1.0 version of Red Hat OpenShift Service Mesh.

This new configuration option is called overload.global_downstream_max_connections, and it is configurable as a proxy runtime setting. Perform the following steps to configure limits at the Ingress Gateway.

Procedure

  1. Create a file named bootstrap-override.json with the following text to force the proxy to override the bootstrap template and load runtime configuration from disk: 

      {
    "runtime": {
      "symlink_root": "/var/lib/istio/envoy/runtime"
    }
  }

  2. Create a secret from the bootstrap-override.json file, replacing <SMCPnamespace> with the namespace where you created the service mesh control plane (SMCP): 

    $  oc create secret generic -n <SMCPnamespace> gateway-bootstrap --from-file=bootstrap-override.json

  3. Update the SMCP configuration to activate the override.

    Updated SMCP configuration example #1

    apiVersion: maistra.io/v1
kind: ServiceMeshControlPlane
spec:
  istio:
    gateways:
      istio-ingressgateway:
        env:
          ISTIO_BOOTSTRAP_OVERRIDE: /var/lib/istio/envoy/custom-bootstrap/bootstrap-override.json
        secretVolumes:
        - mountPath: /var/lib/istio/envoy/custom-bootstrap
          name: custom-bootstrap
          secretName: gateway-bootstrap

  4. To set the new configuration option, create a secret that has the desired value for the overload.global_downstream_max_connections setting. The following example uses a value of 10000: 

    $  oc create secret generic -n <SMCPnamespace> gateway-settings --from-literal=overload.global_downstream_max_connections=10000
  5. Update the SMCP again to mount the secret in the location where Envoy is looking for runtime configuration:

Updated SMCP configuration example #2

apiVersion: maistra.io/v1
kind: ServiceMeshControlPlane
spec:
  template: default
#Change the version to "v1.0" if you are on the 1.0 stream.
  version: v1.1
  istio:
    gateways:
      istio-ingressgateway:
        env:
          ISTIO_BOOTSTRAP_OVERRIDE: /var/lib/istio/envoy/custom-bootstrap/bootstrap-override.json
        secretVolumes:
        - mountPath: /var/lib/istio/envoy/custom-bootstrap
          name: custom-bootstrap
          secretName: gateway-bootstrap
        # below is the new secret mount
        - mountPath: /var/lib/istio/envoy/runtime
          name: gateway-settings
          secretName: gateway-settings

1.1.4.14.2. Upgrading from Elasticsearch 5 to Elasticsearch 6

When updating from Elasticsearch 5 to Elasticsearch 6, you must delete your Jaeger instance, then recreate the Jaeger instance because of an issue with certificates. Re-creating the Jaeger instance triggers creating a new set of certificates. If you are using persistent storage the same volumes can be mounted for the new Jaeger instance as long as the Jaeger name and namespace for the new Jaeger instance are the same as the deleted Jaeger instance.

Procedure if Jaeger is installed as part of Red Hat Service Mesh

  1. Determine the name of your Jaeger custom resource file: 

    $ oc get jaeger -n istio-system

    You should see something like the following: 

    NAME     AGE
jaeger   3d21h

  2. Copy the generated custom resource file into a temporary directory: 

    $ oc get jaeger jaeger -oyaml -n istio-system > /tmp/jaeger-cr.yaml

  3. Delete the Jaeger instance: 

    $ oc delete jaeger jaeger -n istio-system

  4. Recreate the Jaeger instance from your copy of the custom resource file: 

    $ oc create -f /tmp/jaeger-cr.yaml -n istio-system

  5. Delete the copy of the generated custom resource file: 

    $ rm /tmp/jaeger-cr.yaml

Procedure if Jaeger not installed as part of Red Hat Service Mesh

Before you begin, create a copy of your Jaeger custom resource file.

  1. Delete the Jaeger instance by deleting the custom resource file: 

    $ oc delete -f <jaeger-cr-file>

    For example: 

    $ oc delete -f jaeger-prod-elasticsearch.yaml

  2. Recreate your Jaeger instance from the backup copy of your custom resource file: 

    $ oc create -f <jaeger-cr-file>

  3. Validate that your Pods have restarted: 

    $ oc get pods -n jaeger-system -w

1.1.4.15. New features Red Hat OpenShift Service Mesh 1.1.3

This release of Red Hat OpenShift Service Mesh addresses Common Vulnerabilities and Exposures (CVEs) and bug fixes.

1.1.4.16. New features Red Hat OpenShift Service Mesh 1.1.2

This release of Red Hat OpenShift Service Mesh addresses a security vulnerability.

1.1.4.17. New features Red Hat OpenShift Service Mesh 1.1.1

This release of Red Hat OpenShift Service Mesh adds support for a disconnected installation.

1.1.4.18. New features Red Hat OpenShift Service Mesh 1.1.0

This release of Red Hat OpenShift Service Mesh adds support for Istio 1.4.6 and Jaeger 1.17.1.

1.1.4.18.1. Manual updates from 1.0 to 1.1

If you are updating from Red Hat OpenShift Service Mesh 1.0 to 1.1, you must update the ServiceMeshControlPlane resource to update the control plane components to the new version.

  1. In the web console, click the Red Hat OpenShift Service Mesh Operator.
  2. Click the Project menu and choose the project where your ServiceMeshControlPlane is deployed from the list, for example istio-system.
  3. Click the name of your control plane, for example basic-install.
  4. Click YAML and add a version field to the spec: of your ServiceMeshControlPlane resource. For example, to update to Red Hat OpenShift Service Mesh 1.1.0, add version: v1.1. 
spec:
  version: v1.1
  ...

The version field specifies the version of Service Mesh to install and defaults to the latest available version.

注意

Note that support for Red Hat OpenShift Service Mesh v1.0 ended in October, 2020. You must upgrade to either v1.1 or v2.0.

1.1.5. Deprecated features

Some features available in previous releases have been deprecated or removed.

Deprecated functionality is still included in OpenShift Container Platform and continues to be supported; however, it will be removed in a future release of this product and is not recommended for new deployments.

1.1.5.1. Deprecated features Red Hat OpenShift Service Mesh 1.1.5

The following custom resources are deprecated in this release and will be removed in a future release.

  • Policy - The Policy resource is deprecated and will be replaced by the PeerAuthentication resource in a future release.
  • MeshPolicy - The MeshPolicy resource is deprecated and will be replaced by the PeerAuthentication resource in a future release.

  • v1alpha1 RBAC API -The v1alpha1 RBAC policy is deprecated by the v1beta1 AuthorizationPolicy. RBAC (Role Based Access Control) defines ServiceRole and ServiceRoleBinding objects.

    • ServiceRole
    • ServiceRoleBinding

  • RbacConfig - RbacConfig implements the Custom Resource Definition for controlling Istio RBAC behavior.

    • ClusterRbacConfig(versions prior to Red Hat OpenShift Service Mesh 1.0)
    • ServiceMeshRbacConfig (Red Hat OpenShift Service Mesh version 1.0 and later)
  • In Kiali, the login and LDAP strategies are deprecated. A future version will introduce authentication using OpenID providers.

The following components are also deprecated in this release and will be replaced by the Istiod component in a future release.

  • Mixer - access control and usage policies
  • Pilot - service discovery and proxy configuration
  • Citadel - certificate generation
  • Galley - configuration validation and distribution

1.1.6. Known issues

These limitations exist in Red Hat OpenShift Service Mesh:

  • Red Hat OpenShift Service Mesh does not support IPv6, as it is not supported by the upstream Istio project, nor fully supported by OpenShift.
  • Graph layout - The layout for the Kiali graph can render differently, depending on your application architecture and the data to display (number of graph nodes and their interactions). Because it is difficult if not impossible to create a single layout that renders nicely for every situation, Kiali offers a choice of several different layouts. To choose a different layout, you can choose a different Layout Schema from the Graph Settings menu.
  • The first time you access related services such as Jaeger and Grafana, from the Kiali console, you must accept the certificate and re-authenticate using your OpenShift Container Platform login credentials. This happens due to an issue with how the framework displays embedded pages in the console.

1.1.6.1. Service Mesh known issues

These are the known issues in Red Hat OpenShift Service Mesh:

  • Maistra-1502 As a result of CVEs fixes in version 1.0.10, the Istio dashboards are not available from the Home Dashboard menu in Grafana. The Istio dashboards still exist. To access them, click the Dashboard menu in the navigation panel and select the Manage tab.
  • Bug 1821432 Toggle controls in OpenShift Container Platform Control Resource details page do not update the CR correctly. UI Toggle controls in the Service Mesh Control Plane (SMCP) Overview page in the OpenShift Container Platform web console sometimes update the wrong field in the resource. To update a SMCP, edit the YAML content directly or update the resource from the command line instead of clicking the toggle controls.
  • Jaeger/Kiali Operator upgrade blocked with operator pending When upgrading the Jaeger or Kiali Operators with Service Mesh 1.0.x installed, the operator status shows as Pending. There is a solution in progress and a workaround. See the linked Knowledge Base article for more information.
  • Istio-14743 Due to limitations in the version of Istio that this release of Red Hat OpenShift Service Mesh is based on, there are several applications that are currently incompatible with Service Mesh. See the linked community issue for details.

  • MAISTRA-858 The following Envoy log messages describing deprecated options and configurations associated with Istio 1.1.x are expected:

    • [2019-06-03 07:03:28.943][19][warning][misc] [external/envoy/source/common/protobuf/utility.cc:129] Using deprecated option 'envoy.api.v2.listener.Filter.config'. This configuration will be removed from Envoy soon.
    • [2019-08-12 22:12:59.001][13][warning][misc] [external/envoy/source/common/protobuf/utility.cc:174] Using deprecated option 'envoy.api.v2.Listener.use_original_dst' from file lds.proto. This configuration will be removed from Envoy soon.

  • MAISTRA-806 Evicted Istio Operator Pod causes mesh and CNI not to deploy.

    If the istio-operator pod is evicted while deploying the control pane, delete the evicted istio-operator pod.

  • MAISTRA-681 When the control plane has many namespaces, it can lead to performance issues.
  • MAISTRA-465 The Maistra Operator fails to create a service for operator metrics.
  • MAISTRA-453 If you create a new project and deploy pods immediately, sidecar injection does not occur. The operator fails to add the maistra.io/member-of before the pods are created, therefore the pods must be deleted and recreated for sidecar injection to occur.
  • MAISTRA-193 Unexpected console info messages are visible when health checking is enabled for citadel.
  • MAISTRA-158 Applying multiple gateways referencing the same hostname will cause all gateways to stop functioning.

1.1.6.2. Kiali known issues

These are the known issues in Kiali:

  • KIALI-2206 When you are accessing the Kiali console for the first time, and there is no cached browser data for Kiali, the “View in Grafana” link on the Metrics tab of the Kiali Service Details page redirects to the wrong location. The only way you would encounter this issue is if you are accessing Kiali for the first time.
  • KIALI-507 Kiali does not support Internet Explorer 11. This is because the underlying frameworks do not support Internet Explorer. To access the Kiali console, use one of the two most recent versions of the Chrome, Edge, Firefox or Safari browser.

1.1.6.3. Jaeger known issues

These limitations exist in Jaeger:

  • While Kafka publisher is included as part of Jaeger, it is not supported.
  • Apache Spark is not supported.
  • Only self-provisioned Elasticsearch instances are supported. External Elasticsearch instances are not supported in this release.

These are the known issues in Jaeger:

  • TRACING-1166 It is not currently possible to use the Jaeger streaming strategy within a disconnected environment. When a Kafka cluster is being provisioned, it results in a error: Failed to pull image registry.redhat.io/amq7/amq-streams-kafka-24-rhel7@sha256:f9ceca004f1b7dccb3b82d9a8027961f9fe4104e0ed69752c0bdd8078b4a1076.
  • TRACING-809 Jaeger Ingester is incompatible with Kafka 2.3. When there are two or more instances of the Jaeger Ingester and enough traffic it will continuously generate rebalancing messages in the logs. This is due to a regression in Kafka 2.3 that was fixed in Kafka 2.3.1. For more information, see Jaegertracing-1819.

1.1.7. Fixed issues

The following issues been resolved in the current release:

1.1.7.1. Service Mesh fixed issues

  • MAISTRA-2371 Handle tombstones in listerInformer. The updated cache codebase was not handling tombstones when translating the events from the namespace caches to the aggregated cache, leading to a panic in the go routine.

  • MAISTRA-1352 Cert-manager Custom Resource Definitions (CRD) from the control plane installation have been removed for this release and future releases. If you have already installed Red Hat OpenShift Service Mesh, the CRDs must be removed manually if cert-manager is not being used.

    To remove the CRDs, run the following commands: 

    $ oc delete crd clusterissuers.certmanager.k8s.io
    $ oc delete crd issuers.certmanager.k8s.io
    $ oc delete crd certificates.certmanager.k8s.io
    $ oc delete crd orders.certmanager.k8s.io
    $ oc delete crd challenges.certmanager.k8s.io
  • MAISTRA-1649 Headless services conflict when in different namespaces. When deploying headless services within different namespaces the endpoint configuration is merged and results in invalid Envoy configurations being pushed to the sidecars.
  • MAISTRA-1541 Panic in kubernetesenv when the controller is not set on owner reference. If a pod has an ownerReference which does not specify the controller, this will cause a panic within the kubernetesenv cache.go code.
  • TRACING-1300 Failed connection between Agent and Collector when using Istio sidecar. An update of the Jaeger Operator enabled TLS communication by default between a Jaeger sidecar agent and the Jaeger Collector.
  • TRACING-1208 Authentication "500 Internal Error" when accessing Jaeger UI. When trying to authenticate to the UI using OAuth, I get a 500 error because oauth-proxy sidecar doesn’t trust the custom CA bundle defined at installation time with the additionalTrustBundle.
  • OSSM-99 Workloads generated from direct Pod without labels may crash Kiali.
  • OSSM-93 IstioConfigList can’t filter by two or more names.
  • OSSM-92 Cancelling unsaved changes on the VS/DR YAML edit page does not cancel the changes.
  • OSSM-90 Traces not available on the service details page.
  • MAISTRA-1001 Closing HTTP/2 connections could lead to segmentation faults in istio-proxy.
  • MAISTRA-932 Added the requires metadata to add dependency relationship between Jaeger operator and Elasticsearch operator. Ensures that when the Jaeger operator is installed, it automatically deploys the Elasticsearch operator if it is not available.
  • MAISTRA-862 Galley dropped watches and stopped providing configuration to other components after many namespace deletions and re-creations.
  • MAISTRA-833 Pilot stopped delivering configuration after many namespace deletions and re-creations.
  • MAISTRA-684 The default Jaeger version in the istio-operator is 1.12.0, which does not match Jaeger version 1.13.1 that shipped in Red Hat OpenShift Service Mesh 0.12.TechPreview.
  • MAISTRA-622 In Maistra 0.12.0/TP12, permissive mode does not work. The user has the option to use Plain text mode or Mutual TLS mode, but not permissive.
  • MAISTRA-572 Jaeger cannot be used with Kiali. In this release Jaeger is configured to use the OAuth proxy, but is also only configured to work through a browser and does not allow service access. Kiali cannot properly communicate with the Jaeger endpoint and it considers Jaeger to be disabled. See also TRACING-591.
  • MAISTRA-357 In OpenShift 4 Beta on AWS, it is not possible, by default, to access a TCP or HTTPS service through the ingress gateway on a port other than port 80. The AWS load balancer has a health check that verifies if port 80 on the service endpoint is active. Without a service running on port 80, the load balancer health check fails.
  • MAISTRA-348 OpenShift 4 Beta on AWS does not support ingress gateway traffic on ports other than 80 or 443. If you configure your ingress gateway to handle TCP traffic with a port number other than 80 or 443, you have to use the service hostname provided by the AWS load balancer rather than the OpenShift router as a workaround.

1.1.7.2. Kiali fixed issues

  • KIALI-3239 If a Kiali Operator pod has failed with a status of “Evicted” it blocks the Kiali operator from deploying. The workaround is to delete the Evicted pod and redeploy the Kiali operator.
  • KIALI-3118 After changes to the ServiceMeshMemberRoll, for example adding or removing projects, the Kiali pod restarts and then displays errors on the Graph page while the Kiali pod is restarting.
  • KIALI-3096 Runtime metrics fail in Service Mesh. There is an OAuth filter between the Service Mesh and Prometheus, requiring a bearer token to be passed to Prometheus before access is granted. Kiali has been updated to use this token when communicating to the Prometheus server, but the application metrics are currently failing with 403 errors.
  • KIALI-3070 This bug only affects custom dashboards, not the default dashboards. When you select labels in metrics settings and refresh the page, your selections are retained in the menu but your selections are not displayed on the charts.
  • KIALI-2686 When the control plane has many namespaces, it can lead to performance issues.
Red Hat logoGithubRedditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务，以及可以信赖的内容，帮助红帽用户创新并实现他们的目标。

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情，请参阅红帽博客.

關於紅帽

我们提供强化的解决方案，使企业能够更轻松地跨平台和环境（从核心数据中心到网络边缘）工作。

© 2024 Red Hat, Inc.