搜索

此内容没有您所选择的语言版本。

2.3.2. Disabling ACPI Soft-Off with the BIOS

download PDF
The preferred method of disabling ACPI Soft-Off is with chkconfig management (Section 2.3.1, “Disabling ACPI Soft-Off with chkconfig Management”). However, if the preferred method is not effective for your cluster, follow the procedure in this section.

Note

Disabling ACPI Soft-Off with the BIOS may not be possible with some computers.
You can disable ACPI Soft-Off by configuring the BIOS of each cluster node as follows:
  1. Reboot the node and start the BIOS CMOS Setup Utility program.
  2. Navigate to the Power menu (or equivalent power management menu).
  3. At the Power menu, set the Soft-Off by PWR-BTTN function (or equivalent) to Instant-Off (or the equivalent setting that turns off the node via the power button without delay). Example 2.11, “BIOS CMOS Setup Utility: Soft-Off by PWR-BTTN set to Instant-Off shows a Power menu with ACPI Function set to Enabled and Soft-Off by PWR-BTTN set to Instant-Off.

    Note

    The equivalents to ACPI Function, Soft-Off by PWR-BTTN, and Instant-Off may vary among computers. However, the objective of this procedure is to configure the BIOS so that the computer is turned off via the power button without delay.
  4. Exit the BIOS CMOS Setup Utility program, saving the BIOS configuration.
  5. When the cluster is configured and running, verify that the node turns off immediately when fenced.

    Note

    You can fence the node with the fence_node command or Conga.

Example 2.11. BIOS CMOS Setup Utility: Soft-Off by PWR-BTTN set to Instant-Off

+-------------------------------------------------|------------------------+
|    ACPI Function             [Enabled]          |         Item Help      |
|    ACPI Suspend Type         [S1(POS)]          |------------------------|
|  x Run VGABIOS if S3 Resume   Auto              | Menu Level   *         |
|    Suspend Mode              [Disabled]         |                        |
|    HDD Power Down            [Disabled]         |                        |
|    Soft-Off by PWR-BTTN      [Instant-Off]      |                        |
|    CPU THRM-Throttling       [50.0%]            |                        |
|    Wake-Up by PCI card       [Enabled]          |                        |
|    Power On by Ring          [Enabled]          |                        |
|    Wake Up On LAN            [Enabled]          |                        |
|  x USB KB Wake-Up From S3     Disabled          |                        |
|    Resume by Alarm           [Disabled]         |                        |
|  x  Date(of Month) Alarm       0                |                        |
|  x  Time(hh:mm:ss) Alarm       0 :  0 :  0      |                        |
|    POWER ON Function         [BUTTON ONLY]      |                        |
|  x KB Power ON Password       Enter             |                        |
|  x Hot Key Power ON           Ctrl-F1           |                        |
|                                                 |                        |
|                                                 |                        |
+-------------------------------------------------|------------------------+
This example shows ACPI Function set to Enabled, and Soft-Off by PWR-BTTN set to Instant-Off.
Red Hat logoGithubRedditYoutubeTwitter

学习

尝试、购买和销售

社区

关于红帽文档

通过我们的产品和服务,以及可以信赖的内容,帮助红帽用户创新并实现他们的目标。

让开源更具包容性

红帽致力于替换我们的代码、文档和 Web 属性中存在问题的语言。欲了解更多详情,请参阅红帽博客.

關於紅帽

我们提供强化的解决方案,使企业能够更轻松地跨平台和环境(从核心数据中心到网络边缘)工作。

© 2024 Red Hat, Inc.