此内容没有您所选择的语言版本。
Chapter 5. To Add Another Route to the CBR Routing Context
This tutorial shows you how to add a second route to the blueprint.xml
file in the CBRroute
project. The second route:
- Takes messages directly from the terminal end of the first route’s otherwise branch
- Sorts the messages according to customers' country
-
Sends each message to the corresponding
country
folder in theCBRroute/target/messages
folder.
Goals
In this tutorial you will:
- Reconfigure the existing route for direct connection to a second route
-
Add a second route to your
<camelContext>
- Configure the new route to take messages directly from the otherwise branch of the first route
- Add a content-based router to the new route
- Add and configure a message header, logging, and target destination to each output branch of the new route’s content-based router
Prerequisites
To complete this tutorial you will need the CBRroute project you modified in Chapter 4, To Add a Content-Based Router.
If you skipped any tutorial after Chapter 2, To Create a New Route, you can use the prefabricated blueprint5.xml
file to work through this tutorial (for details, see Chapter 1, Using the Fuse Tooling Resource Files).
Reconfiguring the existing route for direct connection
To configure the existing route for direct connection with the new route:
-
Open your
CBRroute/src/main/resources/OSGI-INF/blueprint/blueprint.xml
in the route editor. -
On the canvas, select the
Route_route1
container to open its properties in the Properties view. -
Scroll down to the Shutdown Route property and enter
Default
. -
On the canvas, select the terminal file node
To_Valid
to display its properties in the Properties view. -
In the Uri field, delete the existing text, and then enter
direct:OrderFulfillment
. -
In the Id field, enter
_Fulfill
.
Instead of repurposing the existing To_Valid
terminal file node, you could have replaced it with a To_Valid
node.
Adding the second route
To add a route to the routing context:
-
In the Palette, open the Routing drawer and select the Route (
) pattern.
Drag the Route pattern to the canvas and drop it next to the
Route_route1
container:The Route pattern becomes the
Route_route2
container node on the canvas.-
Click the
Route_route2
container node to display its properties in the Properties view. - Leave each of the properties as is.
As your multiroute routing context grows in complexity, you may want to focus the route editor on an individual route while you work on it. To do so, in Project Explorer, double-click the route you want the route editor to display on the canvas; for example Route_route2
:
![tutProjExSwitchRtesOnCanvas](https://access.redhat.com/webassets/avalon/d/Red_Hat_JBoss_Fuse-6.3-Tooling_Tutorials-en-US/images/c9e81bf9f466211cc0b35a51c3628acd/tutProjExSwitchRtesOnCanvas.png)
To display all routes in the routing context on the canvas, double-click the project’s .xml
context file entry (src/main/resources/OSGI-INF/…
) at the top of the Camel Contexts
folder.
Building and configuring the USA branch of the second route
In the Palette, open the Components drawer and drag a Direct component (
) to the canvas and drop it in the
Route_route2
container:The
Route_route2
container expands to accommodate theFrom_from2
node.On the canvas, select the
From_from2
node to open its properties in the Properties view:-
In the Uri field, replace name (following
direct:
) withOrderFulfillment
, and in the Id field, enter_direct:OrderFulfillment
. In the Palette, open the Routing drawer and drag a Choice (
) pattern to the canvas and drop it in the
Route_route2
container.The
Route_route2
container expands to accommodate theChoice_choice2
node.In the
Route_route2
container, select thedirect:OrderFulfillment
node and drag its connector arrow over theChoice_choice2
node, then release it:-
In the Properties view, leave each of the
Choice_choice2
node’s properties as is. In the Palette, open the Routing drawer and drag a When (
) pattern to the canvas and drop it in the
Choice_choice2
container:The
Choice_choice2
container expands to accommodate theWhen_when2
node.On the canvas, select the
When_when2
node to open its properties in the Properties view:Set the node’s properties this way:
- Select xpath from the Language drop-down menu.
-
Enter
/order/customer/country = 'USA'
in the Expression field. - Leave Trim enabled.
Enter
_when/usa
in the Id field.NoteOnce you select the expression Language, the Properties view displays its properties in an indented list directly below the Language field. The Id property in this list sets the ID of the expression. The Id property following the Description field sets the ID of the
When
node.
In the Palette, open the Transformation drawer and drag the Set Header pattern to the canvas and drop on the
When_when/usa
node:The
When_when/usa
container expands to accommodate theSetHeader_setHeader3
node.On the canvas, select the
SetHeader_setHeader3
node to open its properties in the Properties view:Set the node’s properties this way:
- Select constant from the Language drop-down menu.
-
Enter
USA
in the Expression field. - Leave Trim enabled.
-
Enter
Destination
in the Header Name field. -
Enter
_setHead_usa
in the Id field.
In the Palette, open the Components drawer and drag a Log component (
) to the canvas and drop it in the
When_when/usa
container.The
When_when/usa
container expands to accommodate theLog_log3
node.On the canvas, select the
SetHeader_setHead_usa
node and drag its connector arrow over theLog_log3
node, then release it:On the canvas, select the
Log_log3
node to open its properties in the Properties view:In the Properties view:
-
Enter
Valid order - ship animals to USA customer
in the Message field. -
Enter
_usa
in the Id field. - Leave Logging Level as is.
-
Enter
In the Palette, open the Components drawer and drag a File component (
) to the canvas and drop it in the
When_when/usa
container.The
When_when/usa
container expands to accommodate theTo_to1
node.On the canvas, select the
Log_usa
node and drag its connector arrow over theTo_to1
node, then release it:In the Properties view:
-
Replace directoryName with
target/messages/USA
in the Uri field. -
Enter
_US
in the Id field.
-
Replace directoryName with
On the menu bar, click
to save the routing context file. The USA branch of
Route_route2
should look like this:
Building and configuring the Great Britain branch of the second route
With Route_route2
displayed on the canvas:
In the Palette, open the Routing drawer and drag a When pattern (
) to the canvas and drop it in the
Choice_choice2
container:The
Choice_choice2
container expands to accommodate theWhen_when2
node.-
On the canvas, select the
When_when2
node to open its properties in the Properties view. In the Properties view:
- Select xpath from the Language drop-down menu.
-
Enter
/order/customer/country = 'Great Britain'
in the Expression field. - Leave Trim enabled.
-
Enter
_when/gb
in the Id field.
In the Palette, open the Transformation drawer and drag a Set Header pattern (
) to the canvas and drop it on the
When_when/gb
node:The
When_when/gb
container expands to accommodate theSetHeader_setHeader3
node.-
On the canvas, select the
SetHeader_setHeader3
node to open its properties in the Properties view. In the Properties view:
- Select constant from the Language drop-down menu.
-
Enter
UK
in the Expression field. - Leave Trim as is.
-
Enter
Destination
in the Header Name field. -
Enter
_setHead_uk
in the Id field.
In the Palette, open the Components drawer and drag a Log pattern (
) to the canvas and drop it in the
When_when/gb
container.The
When_when/gb
container expands to accommodate theLog_log3
node.On the canvas, select the
SetHeader_setHead_uk
node and drag its connector arrow over theLog_log3
node, and then release it:-
On the canvas, select the
Log_log3
node to open its properties in the Properties view. In the Properties view:
-
Enter
Valid order - ship animals to UK customer
in the Message field. -
Enter
_uk
in the Id field. - Leave the Logging Level as is.
-
Enter
From the Components drawer, drag a File pattern (
) to the canvas and drop it in the
When_when/gb
container.The
When_when/gb
container expands to accommodate theTo_to1
node.On the canvas, select the
Log_uk
node and drag its connector arrow over theTo_to1
node, and then release it:-
On the canvas, select the
To_to1
node to open its properties in the Properties view. In the Properties view:
-
Replace directoryName with
target/messages/GreatBritain
in the Uri field. -
Enter
_UK
in the Id field.
-
Replace directoryName with
On the menu bar, click
to save the routing context file. The Great Britain branch of
Route_route2
should look like this:
Building and configuring the Germany branch of the second route
With Route_route2
displayed on the canvas:
In the Palette, open the Routing drawer and drag a When pattern (
) to the canvas and drop it in the
Choice_choice2
container:The
Choice_choice2
container expands to accommodate theWhen_when2
node.-
On the canvas, select the
When_when2
node to open its properties in the Properties view. In the Properties view:
- Select xpath from the Language drop-down menu.
-
Enter
/order/customer/country = 'Germany'
in the Expression field. - Leave Trim enabled.
-
Enter
_when/ger
in the Id field.
In the Palette, open the Transformation drawer and drag a Set Header pattern (
) to the canvas and drop it on the
When_when/ger
node:The
When_when/ger
container expands to accommodate theSetHeader_setHeader3
node.-
On the canvas, select the
SetHeader_setHeader3
node to open its properties in the Properties view. In the Properties view:
- Select constant from the Language drop-down menu.
-
Enter
Germany
in the Expression field. - Leave Trim as is.
-
Enter
Destination
in the Header Name field. -
Enter
_setHead_ger
in the Id field.
In the Palette, open the Components drawer and drag a Log pattern (
) to the canvas and drop it in the
When_when/ger
container.The
When_when/ger
container expands to accommodate theLog_log3
node.On the canvas, select the
SetHeader_setHead_ger
node and drag its connector arrow over theLog_log3
node, and then release it:-
On the canvas, select the
Log_log3
node to open its properties in the Properties view. In the Properties view:
-
Enter
Valid order - ship animals to Germany customer
in the Message field. -
Enter
_ger
in the Id field. - Leave the Logging Level as is.
-
Enter
From the Components drawer, drag a File pattern (
) to the canvas and drop it in the
When_when/ger
container.The
When_when/ger
container expands to accommodate theTo_to1
node.On the canvas, select the
Log_ger
node and drag its connector arrow over theTo_to1
node, and then release it:-
On the canvas, select the
To_to1
node to open its properties in the Properties view. In the Properties view:
-
Replace directoryName with
target/messages/Germany
in the Uri field. -
Enter
_GER
in the Id field.
-
Replace directoryName with
On the menu bar, click
to save the routing context file. The Germany branch of
Route_route2
should look like this:
Building and configuring the France branch of the second route
With Route_route2
displayed on the canvas:
In the Palette, open the *Routing drawer and drag an Otherwise pattern (
) to the canvas and drop it in the
Choice_choice2
container:The
Choice_choice2
container expands to accommodate theOtherwise_otherwise1
node.-
On the canvas, select the
Otherwise_otherwise1
node to open its properties in the Properties view. -
In the Properties view, enter
_else/fr
in the Id field. In the Palette, open the Transformation drawer and drag a Set Header pattern (
) to the canvas and drop it on the
Otherwise_else/fr
node:The
Otherwise_else/fr
container expands to accommodate theSetHeader_setHeader3
node.-
On the canvas, select the
SetHeader_setHeader3
node to open its properties in the Properties view. In the Properties view:
- Select constant from the Language drop-down menu.
-
Enter
France
in the Expression field. - Leave Trim as is.
-
Enter
Destination
in the Header Name field. -
Enter
_setHead_fr
in the Id field.
In the Palette, open the Components drawer and drag a Log pattern (
) to the canvas and drop it in the
Otherwise_else/fr
container.The
Otherwise_else/fr
container expands to accommodate theLog_log3
node.On the canvas, select the
SetHeader_setHead_fr
node and drag its connector arrow over theLog_log3
node, and then release it:-
On the canvas, select the
Log_log3
node to open its properties in the Properties view. In the Properties view:
-
Enter
Valid order - ship animals to France customer
in the Message field. -
Enter
_fr
in the Id field. - Leave the Logging Level as is.
-
Enter
From the Components drawer, drag a File pattern (
) to the canvas and drop it in the
Otherwise_else/fr
container.The
Otherwise_else/fr
container expands to accommodate theTo_to1
node.On the canvas, select the
Log_fr
node and drag its connector arrow over theTo_to1
node, and then release it:-
On the canvas, select the
To_to1
node to open its properties in the Properties view. In the Properties view:
-
Replace directoryName with
target/messages/France
in the Uri field. -
Enter
_FR
in the Id field.
-
Replace directoryName with
On the menu bar, click
to save the routing context file. The France branch of
Route_route2
should look like this:
Finishing up
If needed, on the menu bar, select
to save the routing context. The routes on the canvas should look like this:
image::./images/tutCBRRte1Completed.png[Completed first route in the CBRroute routing context]
image::./images/tutCBRRte2Completed.png[Completed second route in the CBRroute routing context]
Click the Source tab at the bottom, left of the canvas to display the XML for the route.
The camelContext element should look like that shown in Example 5.1, “XML for dual-route content-based router”:
Example 5.1. XML for dual-route content-based router
<?xml version="1.0" encoding="UTF-8"?> <blueprint xmlns="http://www.osgi.org/xmlns/blueprint/v1.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.osgi.org/xmlns/blueprint/v1.0.0 https://www.osgi.org/xmlns/blueprint/v1.0.0/blueprint.xsd http://camel.apache.org/schema/blueprint http://camel.apache.org/schema/blueprint/camel-blueprint.xsd"> <camelContext id="_context1" xmlns="http://camel.apache.org/schema/blueprint"> <route id="_route1" shutdownRoute="Default"> <from id="_from1" uri="file:src/data?noop=true"/> <choice id="_choice1"> <when id="_when1"> <xpath>/order/orderline/quantity/text() > /order/orderline/maxAllowed/text()</xpath> <log id="_log1" message="quantity exceeds the maximum allowed - contact customer"/> <setHeader headerName="Destination" id="_setHeader1"> <constant>InvalidOrders</constant> </setHeader> <to id="_Invalid" uri="file:target/messages/invalidOrders"/> </when> <otherwise id="_else2"> <log id="_log2" message="valid order - process"/> <setHeader headerName="Destination" id="_setHeader2"> <constant>Dispatcher</constant> </setHeader> <to id="_Fulfill" uri="direct:OrderFulfillment"/> </otherwise> </choice> </route> <route id="_route2"> <from id="_direct:OrderFulfillment" uri="direct:OrderFulfillment"/> <choice id="_choice2"> <when id="_when/usa"> <xpath>/order/customer/country = 'USA'</xpath> <setHeader headerName="Destination" id="_setHead_usa"> <constant>USA</constant> </setHeader> <log id="_usa" message="Valid order - ship to USA customer"/> <to id="_US" uri="file:target/messages/USA"/> </when> <when id="_when/gb"> <xpath>/order/customer/country = 'Great Britain'</xpath> <setHeader headerName="Destination" id="_setHead_uk"> <constant>UK</constant> </setHeader> <log id="_uk" message="Valid order - ship animals to UK customer"/> <to id="_UK" uri="file:target/messages/GreatBritain"/> </when> <when id="_when/ger"> <xpath>/order/customer/country = 'Germany'</xpath> <setHeader headerName="Destination" id="_setHead_ger"> <constant>Germany</constant> </setHeader> <log id="_ger" message="Valid order - ship to Germany customer"/> <to id="_GER" uri="file:target/messages/Germany"/> </when> <otherwise id="_else/fr"> <setHeader headerName="Destination" id="_setHead_fr"> <constant>France</constant> </setHeader> <log id="_fr" message="Valid order - ship animals to France customer"/> <to id="_FR" uri="file:target/messages/France"/> </otherwise> </choice> </route> </camelContext> </blueprint>
If the tooling added the attribute shutdownRoute=" "
to the second route element (<route id="route2">
), delete that attribute. Otherwise, the CBRroute
project might fail to run.
Next steps
You can run the new route as described in the section called “Running the route”.
Check the end of the Console’s output. You should see these lines:
![tutCBRrte2Console](https://access.redhat.com/webassets/avalon/d/Red_Hat_JBoss_Fuse-6.3-Tooling_Tutorials-en-US/images/0cd433c66db657204810e863f03e050a/tutCBRrte2Console.png)
Check the target destinations in Project Explorer to verify that the routes executed properly:
-
Select
CBRroute
. - Right-click it to open the context menu, then select Refresh.
Expand the folder
target/messages/
as shown in Figure 5.1, “Target message destinations in Project Explorer”. Themessage*.xml
files should be dispersed in your target destinations like this:Figure 5.1. Target message destinations in Project Explorer
NoteTo view message content, double-click a message to open it in the route view’s XML editor.
Further reading
To learn more about the Direct component see the Red Hat JBoss Fuse: Apache Camel Component Reference at Red Hat JBoss Fuse 6.3 documentation