Chapter 7. PriorityLevelConfiguration [flowcontrol.apiserver.k8s.io/v1]

exempt

object

ExemptPriorityLevelConfiguration describes the configurable aspects of the handling of exempt requests. In the mandatory exempt configuration object the values in the fields here can be modified by authorized users, unlike the rest of the spec.

limited

object

LimitedPriorityLevelConfiguration specifies how to handle requests that are subject to limits. It addresses two issues: - How are requests for this priority level limited? - What should be done with requests that exceed the limit?

type

string

type indicates whether this priority level is subject to limitation on request execution. A value of "Exempt" means that requests of this priority level are not subject to a limit (and thus are never queued) and do not detract from the capacity made available to other priority levels. A value of "Limited" means that (a) requests of this priority level are subject to limits and (b) some of the server’s limited capacity is made available exclusively to this priority level. Required.

lendablePercent

integer

lendablePercent prescribes the fraction of the level’s NominalCL that can be borrowed by other priority levels. This value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level’s LendableConcurrencyLimit (LendableCL), is defined as follows.

LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )

nominalConcurrencyShares

integer

nominalConcurrencyShares (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats nominally reserved for this priority level. This DOES NOT limit the dispatching from this priority level but affects the other priority levels through the borrowing mechanism. The server’s concurrency limit (ServerCL) is divided among all the priority levels in proportion to their NCS values:

NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k)

Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of zero.

borrowingLimitPercent

integer

borrowingLimitPercent, if present, configures a limit on how many seats this priority level can borrow from other priority levels. The limit is known as this level’s BorrowingConcurrencyLimit (BorrowingCL) and is a limit on the total number of seats that this level may borrow at any one time. This field holds the ratio of that limit to the level’s nominal concurrency limit. When this field is non-nil, it must hold a non-negative integer and the limit is calculated as follows.

BorrowingCL(i) = round( NominalCL(i) * borrowingLimitPercent(i)/100.0 )

The value of this field can be more than 100, implying that this priority level can borrow a number of seats that is greater than its own nominal concurrency limit (NominalCL). When this field is left nil, the limit is effectively infinite.

lendablePercent

integer

lendablePercent prescribes the fraction of the level’s NominalCL that can be borrowed by other priority levels. The value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level’s LendableConcurrencyLimit (LendableCL), is defined as follows.

LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )

limitResponse

object

LimitResponse defines how to handle requests that can not be executed right now.

nominalConcurrencyShares

integer

nominalConcurrencyShares (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server’s concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values:

NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k)

Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level.

If not specified, this field defaults to a value of 30.

Setting this field to zero supports the construction of a "jail" for this priority level that is used to hold some request(s)

queuing

object

QueuingConfiguration holds the configuration parameters for queuing

type

string

type is "Queue" or "Reject". "Queue" means that requests that can not be executed upon arrival are held in a queue until they can be executed or a queuing limit is reached. "Reject" means that requests that can not be executed upon arrival are rejected. Required.

handSize

integer

handSize is a small positive number that configures the shuffle sharding of requests into queues. When enqueuing a request at this priority level the request’s flow identifier (a string pair) is hashed and the hash value is used to shuffle the list of queues and deal a hand of the size specified here. The request is put into one of the shortest queues in that hand. handSize must be no larger than queues, and should be significantly smaller (so that a few heavy flows do not saturate most of the queues). See the user-facing documentation for more extensive guidance on setting this field. This field has a default value of 8.

queueLengthLimit

integer

queueLengthLimit is the maximum number of requests allowed to be waiting in a given queue of this priority level at a time; excess requests are rejected. This value must be positive. If not specified, it will be defaulted to 50.

queues

integer

queues is the number of queues for this priority level. The queues exist independently at each apiserver. The value must be positive. Setting it to 1 effectively precludes shufflesharding and thus makes the distinguisher method of associated flow schemas irrelevant. This field has a default value of 64.

conditions

array

conditions is the current state of "request-priority".

conditions[]

object

PriorityLevelConfigurationCondition defines the condition of priority level.

lastTransitionTime

Time

lastTransitionTime is the last time the condition transitioned from one status to another.

message

string

message is a human-readable message indicating details about last transition.

reason

string

reason is a unique, one-word, CamelCase reason for the condition’s last transition.

status

string

status is the status of the condition. Can be True, False, Unknown. Required.

type

string

type is the type of the condition. Required.

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

PriorityLevelConfigurationList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

PriorityLevelConfiguration schema

200 - OK

PriorityLevelConfiguration schema

201 - Created

PriorityLevelConfiguration schema

202 - Accepted

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

name

string

name of the PriorityLevelConfiguration

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

PriorityLevelConfiguration schema

201 - Created

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

PriorityLevelConfiguration schema

200 - OK

PriorityLevelConfiguration schema

201 - Created

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

name

string

name of the PriorityLevelConfiguration

200 - OK

WatchEvent schema

401 - Unauthorized

Empty

name

string

name of the PriorityLevelConfiguration

200 - OK

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

PriorityLevelConfiguration schema

201 - Created

PriorityLevelConfiguration schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

PriorityLevelConfiguration schema

200 - OK

PriorityLevelConfiguration schema

201 - Created

PriorityLevelConfiguration schema

401 - Unauthorized

Empty