Installing on vSphere

Procedure

1. Edit your install-config.yaml file and add the proxy settings. For example:

   apiVersion: v1
   baseDomain: my.domain.com
   proxy:
     httpProxy: http://<username>:<pswd>@<ip>:<port> 1
     httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
     noProxy: example.com 3
   additionalTrustBundle: | 4
       -----BEGIN CERTIFICATE-----
       <MY_TRUSTED_CA_CERT>
       -----END CERTIFICATE-----
   additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> 5

   1

   A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.

   2

   A proxy URL to use for creating HTTPS connections outside the cluster.

   3

   A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations. You must include vCenter’s IP address and the IP range that you use for its machines.

   4

   If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.

   5

   Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.

   Note

   The installation program does not support the proxy readinessEndpoints field.

   Note

   If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

   $ ./openshift-install wait-for install-complete --log-level debug

2. Save the file and reference it when installing OpenShift Container Platform.

Procedure

1. Enter the following govc command-line tool commands to create the openshift-region and openshift-zone vCenter tag categories:

   Important

   If you specify different names for the openshift-region and openshift-zone vCenter tag categories, the installation of the OpenShift Container Platform cluster fails.

   $ govc tags.category.create -d "OpenShift region" openshift-region

   $ govc tags.category.create -d "OpenShift zone" openshift-zone

2. To create a region tag for each region vSphere datacenter where you want to deploy your cluster, enter the following command in your terminal:

   $ govc tags.create -c <region_tag_category> <region_tag>

3. To create a zone tag for each vSphere cluster where you want to deploy your cluster, enter the following command:

   $ govc tags.create -c <zone_tag_category> <zone_tag>

4. Attach region tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <region_tag_category> <region_tag_1> /<datacenter_1>

5. Attach the zone tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <zone_tag_category> <zone_tag_1> /<datacenter_1>/host/vcs-mdcnc-workload-1

6. Change to the directory that contains the installation program and initialize the cluster deployment according to your chosen installation requirements.

Procedure

1. Configure the HAProxy Ingress Controller, so that you can enable access to the cluster from your load balancer on ports 6443, 443, and 80:

   Example HAProxy configuration

   #...
   listen my-cluster-api-6443
       bind 192.168.1.100:6443
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /readyz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:6443 check inter 10s rise 2 fall 2
   
   listen my-cluster-machine-config-api-22623
       bind 192.168.1.100:22623
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /healthz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:22623 check inter 10s rise 2 fall 2
   
   listen my-cluster-apps-443
           bind 192.168.1.100:443
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:443 check port 1936 inter 10s rise 2 fall 2
   
   listen my-cluster-apps-80
           bind 192.168.1.100:80
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:80 check port 1936 inter 10s rise 2 fall 2
   # ...

2. Use the curl CLI command to verify that the external load balancer and its resources are operational:

   1. Verify that the cluster machine configuration API is accessible to the Kubernetes API server resource, by running the following command and observing the response:

      $ curl https://<loadbalancer_ip_address>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
      }

   2. Verify that the cluster machine configuration API is accessible to the Machine config server resource, by running the following command and observing the output:

      $ curl -v https://<loadbalancer_ip_address>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that the controller is accessible to the Ingress Controller resource on port 80, by running the following command and observing the output:

      $ curl -I -L -H "Host: console-openshift-console.apps.<cluster_name>.<base_domain>" http://<load_balancer_front_end_IP_address>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.ocp4.private.opequon.net/
      cache-control: no-cache

   4. Verify that the controller is accessible to the Ingress Controller resource on port 443, by running the following command and observing the output:

      $ curl -I -L --insecure --resolve console-openshift-console.apps.<cluster_name>.<base_domain>:443:<Load Balancer Front End IP Address> https://console-openshift-console.apps.<cluster_name>.<base_domain>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

3. Configure the DNS records for your cluster to target the front-end IP addresses of the external load balancer. You must update records to your DNS server for the cluster API and applications over the load balancer.

   Examples of modified DNS records

   <load_balancer_ip_address>  A  api.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   <load_balancer_ip_address>   A apps.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   Important

   DNS propagation might take some time for each DNS record to become available. Ensure that each DNS record propagates before validating each record.

4. Use the curl CLI command to verify that the external load balancer and DNS record configuration are operational:

   1. Verify that you can access the cluster API, by running the following command and observing the output:

      $ curl https://api.<cluster_name>.<base_domain>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
        }

   2. Verify that you can access the cluster machine configuration, by running the following command and observing the output:

      $ curl -v https://api.<cluster_name>.<base_domain>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that you can access each cluster application on port, by running the following command and observing the output:

      $ curl http://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.<cluster-name>.<base domain>/
      cache-control: no-cacheHTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=39HoZgztDnzjJkq/JuLJMeoKNXlfiVv2YgZc09c3TBOBU4NI6kDXaJH1LdicNhN1UsQWzon4Dor9GWGfopaTEQ==; Path=/; Secure
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Tue, 17 Nov 2020 08:42:10 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=9b714eb87e93cf34853e87a92d6894be; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

   4. Verify that you can access each cluster application on port 443, by running the following command and observing the output:

      $ curl https://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

Procedure

1. Edit your install-config.yaml file and add the proxy settings. For example:

   apiVersion: v1
   baseDomain: my.domain.com
   proxy:
     httpProxy: http://<username>:<pswd>@<ip>:<port> 1
     httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
     noProxy: example.com 3
   additionalTrustBundle: | 4
       -----BEGIN CERTIFICATE-----
       <MY_TRUSTED_CA_CERT>
       -----END CERTIFICATE-----
   additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> 5

   1

   A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.

   2

   A proxy URL to use for creating HTTPS connections outside the cluster.

   3

   A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations. You must include vCenter’s IP address and the IP range that you use for its machines.

   4

   If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.

   5

   Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.

   Note

   The installation program does not support the proxy readinessEndpoints field.

   Note

   If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

   $ ./openshift-install wait-for install-complete --log-level debug

2. Save the file and reference it when installing OpenShift Container Platform.

Procedure

1. Enter the following govc command-line tool commands to create the openshift-region and openshift-zone vCenter tag categories:

   Important

   If you specify different names for the openshift-region and openshift-zone vCenter tag categories, the installation of the OpenShift Container Platform cluster fails.

   $ govc tags.category.create -d "OpenShift region" openshift-region

   $ govc tags.category.create -d "OpenShift zone" openshift-zone

2. To create a region tag for each region vSphere datacenter where you want to deploy your cluster, enter the following command in your terminal:

   $ govc tags.create -c <region_tag_category> <region_tag>

3. To create a zone tag for each vSphere cluster where you want to deploy your cluster, enter the following command:

   $ govc tags.create -c <zone_tag_category> <zone_tag>

4. Attach region tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <region_tag_category> <region_tag_1> /<datacenter_1>

5. Attach the zone tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <zone_tag_category> <zone_tag_1> /<datacenter_1>/host/vcs-mdcnc-workload-1

6. Change to the directory that contains the installation program and initialize the cluster deployment according to your chosen installation requirements.

Procedure

1. Configure the HAProxy Ingress Controller, so that you can enable access to the cluster from your load balancer on ports 6443, 443, and 80:

   Example HAProxy configuration

   #...
   listen my-cluster-api-6443
       bind 192.168.1.100:6443
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /readyz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:6443 check inter 10s rise 2 fall 2
   
   listen my-cluster-machine-config-api-22623
       bind 192.168.1.100:22623
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /healthz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:22623 check inter 10s rise 2 fall 2
   
   listen my-cluster-apps-443
           bind 192.168.1.100:443
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:443 check port 1936 inter 10s rise 2 fall 2
   
   listen my-cluster-apps-80
           bind 192.168.1.100:80
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:80 check port 1936 inter 10s rise 2 fall 2
   # ...

2. Use the curl CLI command to verify that the external load balancer and its resources are operational:

   1. Verify that the cluster machine configuration API is accessible to the Kubernetes API server resource, by running the following command and observing the response:

      $ curl https://<loadbalancer_ip_address>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
      }

   2. Verify that the cluster machine configuration API is accessible to the Machine config server resource, by running the following command and observing the output:

      $ curl -v https://<loadbalancer_ip_address>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that the controller is accessible to the Ingress Controller resource on port 80, by running the following command and observing the output:

      $ curl -I -L -H "Host: console-openshift-console.apps.<cluster_name>.<base_domain>" http://<load_balancer_front_end_IP_address>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.ocp4.private.opequon.net/
      cache-control: no-cache

   4. Verify that the controller is accessible to the Ingress Controller resource on port 443, by running the following command and observing the output:

      $ curl -I -L --insecure --resolve console-openshift-console.apps.<cluster_name>.<base_domain>:443:<Load Balancer Front End IP Address> https://console-openshift-console.apps.<cluster_name>.<base_domain>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

3. Configure the DNS records for your cluster to target the front-end IP addresses of the external load balancer. You must update records to your DNS server for the cluster API and applications over the load balancer.

   Examples of modified DNS records

   <load_balancer_ip_address>  A  api.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   <load_balancer_ip_address>   A apps.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   Important

   DNS propagation might take some time for each DNS record to become available. Ensure that each DNS record propagates before validating each record.

4. Use the curl CLI command to verify that the external load balancer and DNS record configuration are operational:

   1. Verify that you can access the cluster API, by running the following command and observing the output:

      $ curl https://api.<cluster_name>.<base_domain>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
        }

   2. Verify that you can access the cluster machine configuration, by running the following command and observing the output:

      $ curl -v https://api.<cluster_name>.<base_domain>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that you can access each cluster application on port, by running the following command and observing the output:

      $ curl http://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.<cluster-name>.<base domain>/
      cache-control: no-cacheHTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=39HoZgztDnzjJkq/JuLJMeoKNXlfiVv2YgZc09c3TBOBU4NI6kDXaJH1LdicNhN1UsQWzon4Dor9GWGfopaTEQ==; Path=/; Secure
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Tue, 17 Nov 2020 08:42:10 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=9b714eb87e93cf34853e87a92d6894be; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

   4. Verify that you can access each cluster application on port 443, by running the following command and observing the output:

      $ curl https://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

Procedure

1. Edit your install-config.yaml file and add the proxy settings. For example:

   apiVersion: v1
   baseDomain: my.domain.com
   proxy:
     httpProxy: http://<username>:<pswd>@<ip>:<port> 1
     httpsProxy: https://<username>:<pswd>@<ip>:<port> 2
     noProxy: example.com 3
   additionalTrustBundle: | 4
       -----BEGIN CERTIFICATE-----
       <MY_TRUSTED_CA_CERT>
       -----END CERTIFICATE-----
   additionalTrustBundlePolicy: <policy_to_add_additionalTrustBundle> 5

   1

   A proxy URL to use for creating HTTP connections outside the cluster. The URL scheme must be http.

   2

   A proxy URL to use for creating HTTPS connections outside the cluster.

   3

   A comma-separated list of destination domain names, IP addresses, or other network CIDRs to exclude from proxying. Preface a domain with . to match subdomains only. For example, .y.com matches x.y.com, but not y.com. Use * to bypass the proxy for all destinations. You must include vCenter’s IP address and the IP range that you use for its machines.

   4

   If provided, the installation program generates a config map that is named user-ca-bundle in the openshift-config namespace that contains one or more additional CA certificates that are required for proxying HTTPS connections. The Cluster Network Operator then creates a trusted-ca-bundle config map that merges these contents with the Red Hat Enterprise Linux CoreOS (RHCOS) trust bundle, and this config map is referenced in the trustedCA field of the Proxy object. The additionalTrustBundle field is required unless the proxy’s identity certificate is signed by an authority from the RHCOS trust bundle.

   5

   Optional: The policy to determine the configuration of the Proxy object to reference the user-ca-bundle config map in the trustedCA field. The allowed values are Proxyonly and Always. Use Proxyonly to reference the user-ca-bundle config map only when http/https proxy is configured. Use Always to always reference the user-ca-bundle config map. The default value is Proxyonly.

   Note

   The installation program does not support the proxy readinessEndpoints field.

   Note

   If the installer times out, restart and then complete the deployment by using the wait-for command of the installer. For example:

   $ ./openshift-install wait-for install-complete --log-level debug

2. Save the file and reference it when installing OpenShift Container Platform.

Procedure

1. Enter the following govc command-line tool commands to create the openshift-region and openshift-zone vCenter tag categories:

   Important

   If you specify different names for the openshift-region and openshift-zone vCenter tag categories, the installation of the OpenShift Container Platform cluster fails.

   $ govc tags.category.create -d "OpenShift region" openshift-region

   $ govc tags.category.create -d "OpenShift zone" openshift-zone

2. To create a region tag for each region vSphere datacenter where you want to deploy your cluster, enter the following command in your terminal:

   $ govc tags.create -c <region_tag_category> <region_tag>

3. To create a zone tag for each vSphere cluster where you want to deploy your cluster, enter the following command:

   $ govc tags.create -c <zone_tag_category> <zone_tag>

4. Attach region tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <region_tag_category> <region_tag_1> /<datacenter_1>

5. Attach the zone tags to each vCenter datacenter object by entering the following command:

   $ govc tags.attach -c <zone_tag_category> <zone_tag_1> /<datacenter_1>/host/vcs-mdcnc-workload-1

6. Change to the directory that contains the installation program and initialize the cluster deployment according to your chosen installation requirements.

Procedure

1. Configure the HAProxy Ingress Controller, so that you can enable access to the cluster from your load balancer on ports 6443, 443, and 80:

   Example HAProxy configuration

   #...
   listen my-cluster-api-6443
       bind 192.168.1.100:6443
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /readyz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:6443 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:6443 check inter 10s rise 2 fall 2
   
   listen my-cluster-machine-config-api-22623
       bind 192.168.1.100:22623
       mode tcp
       balance roundrobin
     option httpchk
     http-check connect
     http-check send meth GET uri /healthz
     http-check expect status 200
       server my-cluster-master-2 192.168.1.101:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-0 192.168.1.102:22623 check inter 10s rise 2 fall 2
       server my-cluster-master-1 192.168.1.103:22623 check inter 10s rise 2 fall 2
   
   listen my-cluster-apps-443
           bind 192.168.1.100:443
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:443 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:443 check port 1936 inter 10s rise 2 fall 2
   
   listen my-cluster-apps-80
           bind 192.168.1.100:80
           mode tcp
           balance roundrobin
       option httpchk
       http-check connect
       http-check send meth GET uri /healthz/ready
       http-check expect status 200
           server my-cluster-worker-0 192.168.1.111:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-1 192.168.1.112:80 check port 1936 inter 10s rise 2 fall 2
           server my-cluster-worker-2 192.168.1.113:80 check port 1936 inter 10s rise 2 fall 2
   # ...

2. Use the curl CLI command to verify that the external load balancer and its resources are operational:

   1. Verify that the cluster machine configuration API is accessible to the Kubernetes API server resource, by running the following command and observing the response:

      $ curl https://<loadbalancer_ip_address>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
      }

   2. Verify that the cluster machine configuration API is accessible to the Machine config server resource, by running the following command and observing the output:

      $ curl -v https://<loadbalancer_ip_address>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that the controller is accessible to the Ingress Controller resource on port 80, by running the following command and observing the output:

      $ curl -I -L -H "Host: console-openshift-console.apps.<cluster_name>.<base_domain>" http://<load_balancer_front_end_IP_address>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.ocp4.private.opequon.net/
      cache-control: no-cache

   4. Verify that the controller is accessible to the Ingress Controller resource on port 443, by running the following command and observing the output:

      $ curl -I -L --insecure --resolve console-openshift-console.apps.<cluster_name>.<base_domain>:443:<Load Balancer Front End IP Address> https://console-openshift-console.apps.<cluster_name>.<base_domain>

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

3. Configure the DNS records for your cluster to target the front-end IP addresses of the external load balancer. You must update records to your DNS server for the cluster API and applications over the load balancer.

   Examples of modified DNS records

   <load_balancer_ip_address>  A  api.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   <load_balancer_ip_address>   A apps.<cluster_name>.<base_domain>
   A record pointing to Load Balancer Front End

   Important

   DNS propagation might take some time for each DNS record to become available. Ensure that each DNS record propagates before validating each record.

4. Use the curl CLI command to verify that the external load balancer and DNS record configuration are operational:

   1. Verify that you can access the cluster API, by running the following command and observing the output:

      $ curl https://api.<cluster_name>.<base_domain>:6443/version --insecure

      If the configuration is correct, you receive a JSON object in response:

      {
        "major": "1",
        "minor": "11+",
        "gitVersion": "v1.11.0+ad103ed",
        "gitCommit": "ad103ed",
        "gitTreeState": "clean",
        "buildDate": "2019-01-09T06:44:10Z",
        "goVersion": "go1.10.3",
        "compiler": "gc",
        "platform": "linux/amd64"
        }

   2. Verify that you can access the cluster machine configuration, by running the following command and observing the output:

      $ curl -v https://api.<cluster_name>.<base_domain>:22623/healthz --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      Content-Length: 0

   3. Verify that you can access each cluster application on port, by running the following command and observing the output:

      $ curl http://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 302 Found
      content-length: 0
      location: https://console-openshift-console.apps.<cluster-name>.<base domain>/
      cache-control: no-cacheHTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=39HoZgztDnzjJkq/JuLJMeoKNXlfiVv2YgZc09c3TBOBU4NI6kDXaJH1LdicNhN1UsQWzon4Dor9GWGfopaTEQ==; Path=/; Secure
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Tue, 17 Nov 2020 08:42:10 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=9b714eb87e93cf34853e87a92d6894be; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

   4. Verify that you can access each cluster application on port 443, by running the following command and observing the output:

      $ curl https://console-openshift-console.apps.<cluster_name>.<base_domain> -I -L --insecure

      If the configuration is correct, the output from the command shows the following response:

      HTTP/1.1 200 OK
      referrer-policy: strict-origin-when-cross-origin
      set-cookie: csrf-token=UlYWOyQ62LWjw2h003xtYSKlh1a0Py2hhctw0WmV2YEdhJjFyQwWcGBsja261dGLgaYO0nxzVErhiXt6QepA7g==; Path=/; Secure; SameSite=Lax
      x-content-type-options: nosniff
      x-dns-prefetch-control: off
      x-frame-options: DENY
      x-xss-protection: 1; mode=block
      date: Wed, 04 Oct 2023 16:29:38 GMT
      content-type: text/html; charset=utf-8
      set-cookie: 1e2670d92730b515ce3a1bb65da45062=1bf5e9573c9a2760c964ed1659cc1673; path=/; HttpOnly; Secure; SameSite=None
      cache-control: private

1. OpenShift Container Platform and Kubernetes are sensitive to disk performance, and faster storage is recommended, particularly for etcd on the control plane nodes which require a 10 ms p99 fsync duration. Note that on many cloud platforms, storage size and IOPS scale together, so you might need to over-allocate storage volume to obtain sufficient performance.
2. As with all user-provisioned installations, if you choose to use RHEL compute machines in your cluster, you take responsibility for all operating system life cycle management and maintenance, including performing system updates, applying patches, and completing all other required tasks. Use of RHEL 7 compute machines is deprecated and has been removed in OpenShift Container Platform 4.10 and later.