OperatorHub APIs

address

string

Address is a host that OLM can use to connect to a pre-existing registry. Format: <registry-host or ip>:<port> Only used when SourceType = SourceTypeGrpc. Ignored when the Image field is set.

configMap

string

ConfigMap is the name of the ConfigMap to be used to back a configmap-server registry. Only used when SourceType = SourceTypeConfigmap or SourceTypeInternal.

description

string

displayName

string

Metadata

grpcPodConfig

object

GrpcPodConfig exposes different overrides for the pod spec of the CatalogSource Pod. Only used when SourceType = SourceTypeGrpc and Image is set.

icon

object

image

string

Image is an operator-registry container image to instantiate a registry-server with. Only used when SourceType = SourceTypeGrpc. If present, the address field is ignored.

priority

integer

Priority field assigns a weight to the catalog source to prioritize them so that it can be consumed by the dependency resolver. Usage: Higher weight indicates that this catalog source is preferred over lower weighted catalog sources during dependency resolution. The range of the priority value can go from positive to negative in the range of int32. The default value to a catalog source with unassigned priority would be 0. The catalog source with the same priority values will be ranked lexicographically based on its name.

publisher

string

runAsRoot

boolean

RunAsRoot allows admins to indicate that they wish to run the CatalogSource pod in a privileged pod as root. This should only be enabled when running older catalog images which could not be run as non-root.

secrets

array (string)

Secrets represent set of secrets that can be used to access the contents of the catalog. It is best to keep this list small, since each will need to be tried for every catalog entry.

sourceType

string

SourceType is the type of source

updateStrategy

object

UpdateStrategy defines how updated catalog source images can be discovered Consists of an interval that defines polling duration and an embedded strategy type

affinity

object

Affinity is the catalog source’s pod’s affinity.

extractContent

object

ExtractContent configures the gRPC catalog Pod to extract catalog metadata from the provided index image and use a well-known version of the opm server to expose it. The catalog index image that this CatalogSource is configured to use must be using the file-based catalogs in order to utilize this feature.

memoryTarget

integer-or-string

MemoryTarget configures the $GOMEMLIMIT value for the gRPC catalog Pod. This is a soft memory limit for the server, which the runtime will attempt to meet but makes no guarantees that it will do so. If this value is set, the Pod will have the following modifications made to the container running the server: - the $GOMEMLIMIT environment variable will be set to this value in bytes - the memory request will be set to this value

This field should be set if it’s desired to reduce the footprint of a catalog server as much as possible, or if a catalog being served is very large and needs more than the default allocation. If your index image has a file- system cache, determine a good approximation for this value by doubling the size of the package cache at /tmp/cache/cache/packages.json in the index image.

This field is best-effort; if unset, no default will be used and no Pod memory limit or $GOMEMLIMIT value will be set.

nodeSelector

object (string)

NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node’s labels for the pod to be scheduled on that node.

priorityClassName

string

If specified, indicates the pod’s priority. If not specified, the pod priority will be default or zero if there is no default.

securityContextConfig

string

SecurityContextConfig can be one of legacy or restricted. The CatalogSource’s pod is either injected with the right pod.spec.securityContext and pod.spec.container[*].securityContext values to allow the pod to run in Pod Security Admission (PSA) restricted mode, or doesn’t set these values at all, in which case the pod can only be run in PSA baseline or privileged namespaces. If the SecurityContextConfig is unspecified, the mode will be determined by the namespace’s PSA configuration. If the namespace is enforcing restricted mode, then the pod will be configured as if restricted was specified. Otherwise, it will be configured as if legacy was specified. Specifying a value other than legacy or restricted result in a validation error. When using older catalog images, which can not run in restricted mode, the SecurityContextConfig should be set to legacy.

More information about PSA can be found here: https://kubernetes.io/docs/concepts/security/pod-security-admission/'

tolerations

array

Tolerations are the catalog source’s pod’s tolerations.

tolerations[]

object

The pod this Toleration is attached to tolerates any taint that matches the triple <key,value,effect> using the matching operator <operator>.

nodeAffinity

object

Describes node affinity scheduling rules for the pod.

podAffinity

object

Describes pod affinity scheduling rules (e.g. co-locate this pod in the same node, zone, etc. as some other pod(s)).

podAntiAffinity

object

Describes pod anti-affinity scheduling rules (e.g. avoid putting this pod in the same node, zone, etc. as some other pod(s)).

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

An empty preferred scheduling term matches all objects with implicit weight 0 (i.e. it’s a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op).

requiredDuringSchedulingIgnoredDuringExecution

object

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to an update), the system may or may not try to eventually evict the pod from its node.

preference

object

A node selector term, associated with the corresponding weight.

weight

integer

Weight associated with matching the corresponding nodeSelectorTerm, in the range 1-100.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

nodeSelectorTerms

array

Required. A list of node selector terms. The terms are ORed.

nodeSelectorTerms[]

object

A null or empty node selector term matches no objects. The requirements of them are ANDed. The TopologySelectorTerm type implements a subset of the NodeSelectorTerm.

matchExpressions

array

A list of node selector requirements by node’s labels.

matchExpressions[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchFields

array

A list of node selector requirements by node’s fields.

matchFields[]

object

A node selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

key

string

The label key that the selector applies to.

operator

string

Represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt.

values

array (string)

An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

preferredDuringSchedulingIgnoredDuringExecution

array

The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.

preferredDuringSchedulingIgnoredDuringExecution[]

object

The weights of all of the matched WeightedPodAffinityTerm fields are added per-node to find the most preferred node(s)

requiredDuringSchedulingIgnoredDuringExecution

array

If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.

requiredDuringSchedulingIgnoredDuringExecution[]

object

Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key <topologyKey> matches that of any node on which a pod of the set of pods is running

podAffinityTerm

object

Required. A pod affinity term, associated with the corresponding weight.

weight

integer

weight associated with matching the corresponding podAffinityTerm, in the range 1-100.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

labelSelector

object

A label query over a set of resources, in this case pods. If it’s null, this PodAffinityTerm matches with no Pods.

matchLabelKeys

array (string)

MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key in (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

mismatchLabelKeys

array (string)

MismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with labelSelector as key notin (value) to select the group of existing pods which pods will be taken into consideration for the incoming pod’s pod (anti) affinity. Keys that don’t exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn’t set. This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate.

namespaceSelector

object

A label query over the set of namespaces that the term applies to. The term is applied to the union of the namespaces selected by this field and the ones listed in the namespaces field. null selector and null or empty namespaces list means "this pod’s namespace". An empty selector ({}) matches all namespaces.

namespaces

array (string)

namespaces specifies a static list of namespace names that the term applies to. The term is applied to the union of the namespaces listed in this field and the ones selected by namespaceSelector. null or empty namespaces list and null namespaceSelector means "this pod’s namespace".

topologyKey

string

This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

cacheDir

string

CacheDir is the directory storing the pre-calculated API cache.

catalogDir

string

CatalogDir is the directory storing the file-based catalog contents.

effect

string

Effect indicates the taint effect to match. Empty means match all taint effects. When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute.

key

string

Key is the taint key that the toleration applies to. Empty means match all taint keys. If the key is empty, operator must be Exists; this combination means to match all values and all keys.

operator

string

Operator represents a key’s relationship to the value. Valid operators are Exists and Equal. Defaults to Equal. Exists is equivalent to wildcard for value, so that a pod can tolerate all taints of a particular category.

tolerationSeconds

integer

TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system.

value

string

Value is the taint value the toleration matches to. If the operator is Exists, the value should be empty, otherwise just a regular string.

base64data

string

mediatype

string

registryPoll

object

interval

string

Interval is used to determine the time interval between checks of the latest catalog source version. The catalog operator polls to see if a new version of the catalog source is available. If available, the latest image is pulled and gRPC traffic is directed to the latest catalog source.

conditions

array

Represents the state of a CatalogSource. Note that Message and Reason represent the original status information, which may be migrated to be conditions based in the future. Any new features introduced will use conditions.

conditions[]

object

Condition contains details for one aspect of the current state of this API Resource. --- This struct is intended for direct use as an array at the field path .status.conditions. For example,

type FooStatus struct{ // Represents the observations of a foo’s current state. // Known .status.conditions.type are: "Available", "Progressing", and "Degraded" // +patchMergeKey=type // +patchStrategy=merge // +listType=map // +listMapKey=type Conditions []metav1.Condition json:"conditions,omitempty" patchStrategy:"merge" patchMergeKey:"type" protobuf:"bytes,1,rep,name=conditions"

// other fields }

configMapReference

object

ConfigMapReference (deprecated) is the reference to the ConfigMap containing the catalog source’s configuration, when the catalog source is a ConfigMap

connectionState

object

ConnectionState represents the current state of the CatalogSource’s connection to the registry

latestImageRegistryPoll

string

The last time the CatalogSource image registry has been polled to ensure the image is up-to-date

message

string

A human readable message indicating details about why the CatalogSource is in this condition.

reason

string

Reason is the reason the CatalogSource was transitioned to its current state.

registryService

object

RegistryService represents the current state of the GRPC service used to serve the catalog

lastTransitionTime

string

lastTransitionTime is the last time the condition transitioned from one status to another. This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable.

message

string

message is a human readable message indicating details about the transition. This may be an empty string.

observedGeneration

integer

observedGeneration represents the .metadata.generation that the condition was set based upon. For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date with respect to the current state of the instance.

reason

string

reason contains a programmatic identifier indicating the reason for the condition’s last transition. Producers of specific condition types may define expected values and meanings for this field, and whether the values are considered a guaranteed API. The value should be a CamelCase string. This field may not be empty.

status

string

status of the condition, one of True, False, Unknown.

type

string

type of condition in CamelCase or in foo.example.com/CamelCase. --- Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be useful (see .node.status.conditions), the ability to deconflict is important. The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt)

lastUpdateTime

string

name

string

namespace

string

resourceVersion

string

uid

string

UID is a type that holds unique ID values, including UUIDs. Because we don’t ONLY use UUIDs, this is an alias to string. Being a type captures intent and helps make sure that UIDs and names do not get conflated.

address

string

lastConnect

string

lastObservedState

string

createdAt

string

port

string

protocol

string

serviceName

string

serviceNamespace

string

200 - OK

CatalogSourceList schema

401 - Unauthorized

Empty

200 - OK

Status schema

401 - Unauthorized

Empty

200 - OK

CatalogSourceList schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

202 - Accepted

CatalogSource schema

401 - Unauthorized

Empty

name

string

name of the CatalogSource

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

200 - OK

Status schema

202 - Accepted

Status schema

401 - Unauthorized

Empty

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

401 - Unauthorized

Empty

name

string

name of the CatalogSource

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

200 - OK

CatalogSource schema

401 - Unauthorized

Empty

dryRun

string

When present, indicates that modifications should not be persisted. An invalid or unrecognized dryRun directive will result in an error response and no further processing of the request. Valid values are: - All: all dry run stages will be processed

fieldValidation

string

fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.

body

CatalogSource schema

200 - OK

CatalogSource schema

201 - Created

CatalogSource schema

401 - Unauthorized

Empty

annotations

object (string)

Annotations is an unstructured key value map stored with a resource that may be set by external tools to store and retrieve arbitrary metadata.

apiservicedefinitions

object

APIServiceDefinitions declares all of the extension apis managed or required by an operator being ran by ClusterServiceVersion.

cleanup

object

Cleanup specifies the cleanup behaviour when the CSV gets deleted

customresourcedefinitions

object

CustomResourceDefinitions declares all of the CRDs managed or required by an operator being ran by ClusterServiceVersion.

If the CRD is present in the Owned list, it is implicitly required.

description

string

Description of the operator. Can include the features, limitations or use-cases of the operator.

displayName

string

The name of the operator in display format.

icon

array

The icon for this operator.

icon[]

object

install

object

NamedInstallStrategy represents the block of an ClusterServiceVersion resource where the install strategy is specified.

installModes

array

InstallModes specify supported installation types

installModes[]

object

InstallMode associates an InstallModeType with a flag representing if the CSV supports it

keywords

array (string)

A list of keywords describing the operator.

labels

object (string)

Map of string keys and values that can be used to organize and categorize (scope and select) objects.

links

array

A list of links related to the operator.

links[]

object

maintainers

array

A list of organizational entities maintaining the operator.

maintainers[]

object

maturity

string

minKubeVersion

string

nativeAPIs

array

nativeAPIs[]

object

GroupVersionKind unambiguously identifies a kind. It doesn’t anonymously include GroupVersion to avoid automatic coercion. It doesn’t use a GroupVersion to avoid custom marshalling

provider

object

The publishing entity behind the operator.

relatedImages

array

List any related images, or other container images that your Operator might require to perform their functions. This list should also include operand images as well. All image references should be specified by digest (SHA) and not by tag. This field is only used during catalog creation and plays no part in cluster runtime.

relatedImages[]

object

replaces

string

The name of a CSV this one replaces. Should match the metadata.Name field of the old CSV.

selector

object

Label selector for related resources.

skips

array (string)

The name(s) of one or more CSV(s) that should be skipped in the upgrade graph. Should match the metadata.Name field of the CSV that should be skipped. This field is only used during catalog creation and plays no part in cluster runtime.

version

string

webhookdefinitions

array

webhookdefinitions[]

object

WebhookDescription provides details to OLM about required webhooks

owned

array

owned[]

object

APIServiceDescription provides details to OLM about apis provided via aggregation

required

array

required[]

object

APIServiceDescription provides details to OLM about apis provided via aggregation

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

containerPort

integer

deploymentName

string

description

string

displayName

string

group

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a reference to a Kubernetes resource type that the referrer utilizes.

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

Kind of the referenced resource type.

name

string

Plural name of the referenced resource type (CustomResourceDefinition.Spec.Names[].Plural). Empty string if the referenced resource type is not a custom resource.

version

string

API Version of the referenced resource type.

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

containerPort

integer

deploymentName

string

description

string

displayName

string

group

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a reference to a Kubernetes resource type that the referrer utilizes.

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

Kind of the referenced resource type.

name

string

Plural name of the referenced resource type (CustomResourceDefinition.Spec.Names[].Plural). Empty string if the referenced resource type is not a custom resource.

version

string

API Version of the referenced resource type.

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

enabled

boolean

owned

array

owned[]

object

CRDDescription provides details to OLM about the CRDs

required

array

required[]

object

CRDDescription provides details to OLM about the CRDs

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

description

string

displayName

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a reference to a Kubernetes resource type that the referrer utilizes.

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

Kind of the referenced resource type.

name

string

Plural name of the referenced resource type (CustomResourceDefinition.Spec.Names[].Plural). Empty string if the referenced resource type is not a custom resource.

version

string

API Version of the referenced resource type.

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

actionDescriptors

array

actionDescriptors[]

object

ActionDescriptor describes a declarative action that can be performed on a custom resource instance

description

string

displayName

string

kind

string

name

string

resources

array

resources[]

object

APIResourceReference is a reference to a Kubernetes resource type that the referrer utilizes.

specDescriptors

array

specDescriptors[]

object

SpecDescriptor describes a field in a spec block of a CRD so that OLM can consume it

statusDescriptors

array

statusDescriptors[]

object

StatusDescriptor describes a field in a status block of a CRD so that OLM can consume it

version

string

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

kind

string

Kind of the referenced resource type.

name

string

Plural name of the referenced resource type (CustomResourceDefinition.Spec.Names[].Plural). Empty string if the referenced resource type is not a custom resource.

version

string

API Version of the referenced resource type.

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

description

string

displayName

string

path

string

value

string

RawMessage is a raw encoded JSON value. It implements [Marshaler] and [Unmarshaler] and can be used to delay JSON decoding or precompute a JSON encoding.

x-descriptors

array (string)

base64data

string

mediatype

string

spec

object

StrategyDetailsDeployment represents the parsed details of a Deployment InstallStrategy.

strategy

string

clusterPermissions

array

clusterPermissions[]

object

StrategyDeploymentPermissions describe the rbac rules and service account needed by the install strategy

deployments

array

deployments[]

object

StrategyDeploymentSpec contains the name, spec and labels for the deployment ALM should create

permissions

array

permissions[]

object

StrategyDeploymentPermissions describe the rbac rules and service account needed by the install strategy

rules

array

rules[]

object

PolicyRule holds information that describes a policy rule, but does not contain information about who the rule applies to or which namespace the rule applies to.

serviceAccountName

string

apiGroups

array (string)

APIGroups is the name of the APIGroup that contains the resources. If multiple API groups are specified, any action requested against one of the enumerated resources in any API group will be allowed. "" represents the core API group and "*" represents all API groups.

nonResourceURLs

array (string)

NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path Since non-resource URLs are not namespaced, this field is only applicable for ClusterRoles referenced from a ClusterRoleBinding. Rules can either apply to API resources (such as "pods" or "secrets") or non-resource URL paths (such as "/api"), but not both.

resourceNames

array (string)

ResourceNames is an optional white list of names that the rule applies to. An empty set means that everything is allowed.

resources

array (string)

Resources is a list of resources this rule applies to. '*' represents all resources.

verbs

array (string)

Verbs is a list of Verbs that apply to ALL the ResourceKinds contained in this rule. '*' represents all verbs.

label

object (string)

Set is a map of label:value. It implements Labels.

name

string

spec

object

DeploymentSpec is the specification of the desired behavior of the Deployment.

minReadySeconds

integer

Minimum number of seconds for which a newly created pod should be ready without any of its container crashing, for it to be considered available. Defaults to 0 (pod will be considered available as soon as it is ready)

paused

boolean

Indicates that the deployment is paused.

progressDeadlineSeconds

integer

The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.

replicas

integer

Number of desired pods. This is a pointer to distinguish between explicit zero and not specified. Defaults to 1.

revisionHistoryLimit

integer

The number of old ReplicaSets to retain to allow rollback. This is a pointer to distinguish between explicit zero and not specified. Defaults to 10.

selector

object

Label selector for pods. Existing ReplicaSets whose pods are selected by this will be the ones affected by this deployment. It must match the pod template’s labels.

strategy

object

The deployment strategy to use to replace existing pods with new ones.

template

object

Template describes the pods that will be created. The only allowed template.spec.restartPolicy value is "Always".

matchExpressions

array

matchExpressions is a list of label selector requirements. The requirements are ANDed.

matchExpressions[]

object

A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values.

matchLabels

object (string)

matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is "key", the operator is "In", and the values array contains only "value". The requirements are ANDed.

key

string

key is the label key that the selector applies to.

operator

string

operator represents a key’s relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.

values

array (string)

values is an array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. This array is replaced during a strategic merge patch.

rollingUpdate

object

Rolling update config params. Present only if DeploymentStrategyType = RollingUpdate. --- TODO: Update this to follow our convention for oneOf, whatever we decide it to be.

type

string

Type of deployment. Can be "Recreate" or "RollingUpdate". Default is RollingUpdate.

maxSurge

integer-or-string

The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.

maxUnavailable

integer-or-string

The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.

metadata

``

Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata

spec

object

Specification of the desired behavior of the pod. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status

activeDeadlineSeconds

integer

Optional duration in seconds the pod may be active on the node relative to StartTime before the system will actively try to mark it failed and kill associated containers. Value must be a positive integer.

affinity

object

If specified, the pod’s scheduling constraints

automountServiceAccountToken

boolean

AutomountServiceAccountToken indicates whether a service account token should be automatically mounted.

containers

array

List of containers belonging to the pod. Containers cannot currently be added or removed. There must be at least one container in a Pod. Cannot be updated.

containers[]

object

A single application container that you want to run within a pod.

dnsConfig

object

Specifies the DNS parameters of a pod. Parameters specified here will be merged to the generated DNS configuration based on DNSPolicy.

dnsPolicy

string

Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.

enableServiceLinks

boolean

EnableServiceLinks indicates whether information about services should be injected into pod’s environment variables, matching the syntax of Docker links. Optional: Defaults to true.

ephemeralContainers

array

List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod’s ephemeralcontainers subresource.

ephemeralContainers[]

object

An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation.

To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.

hostAliases

array

HostAliases is an optional list of hosts and IPs that will be injected into the pod’s hosts file if specified.

hostAliases[]

object

HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the pod’s hosts file.

hostIPC

boolean

Use the host’s ipc namespace. Optional: Default to false.

hostNetwork

boolean

Host networking requested for this pod. Use the host’s network namespace. If this option is set, the ports that will be used must be specified. Default to false.

hostPID

boolean

Use the host’s pid namespace. Optional: Default to false.

hostUsers

boolean

Use the host’s user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.

hostname

string

Specifies the hostname of the Pod If not specified, the pod’s hostname will be set to a system-defined value.

imagePullSecrets

array

ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod

imagePullSecrets[]

object

LocalObjectReference contains enough information to let you locate the referenced object inside the same namespace.

initContainers

array

List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/

initContainers[]

object

A single application container that you want to run within a pod.

nodeName

string

NodeName is a request to schedule this pod onto a specific node. If it is non-empty, the scheduler simply schedules this pod onto that node, assuming that it fits resource requirements.

nodeSelector

object (string)

NodeSelector is a selector which must be true for the pod to fit on a node. Selector which must match a node’s labels for the pod to be scheduled on that node. More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/

os

object

Specifies the OS of the containers in the pod. Some pod and container fields are restricted if this is set.

If the OS field is set to linux, the following fields must be unset: -securityContext.windowsOptions

If the OS field is set to windows, following fields must be unset: - spec.hostPID - spec.hostIPC - spec.hostUsers - spec.securityContext.appArmorProfile - spec.securityContext.seLinuxOptions - spec.securityContext.seccompProfile - spec.securityContext.fsGroup - spec.securityContext.fsGroupChangePolicy - spec.securityContext.sysctls - spec.shareProcessNamespace - spec.securityContext.runAsUser - spec.securityContext.runAsGroup - spec.securityContext.supplementalGroups - spec.containers[].securityContext.appArmorProfile - spec.containers[].securityContext.seLinuxOptions - spec.containers[].securityContext.seccompProfile - spec.containers[].securityContext.capabilities - spec.containers[].securityContext.readOnlyRootFilesystem - spec.containers[].securityContext.privileged - spec.containers[].securityContext.allowPrivilegeEscalation - spec.containers[].securityContext.procMount - spec.containers[].securityContext.runAsUser - spec.containers[].securityContext.runAsGroup

overhead

integer-or-string

Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md

preemptionPolicy

string

PreemptionPolicy is the Policy for preempting pods with lower priority. One of Never, PreemptLowerPriority. Defaults to PreemptLowerPriority if unset.

priority

integer

The priority value. Various system components use this field to find the priority of the pod. When Priority Admission Controller is enabled, it prevents users from setting this field. The admission controller populates this field from PriorityClassName. The higher the value, the higher the priority.

priorityClassName

string

If specified, indicates the pod’s priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.

readinessGates