SupportConsoleDevelopersStart a trialContact

Chapter 4. address

This chapter describes the commands under the address command.

4.1. address scope create

Create a new Address Scope

Usage:

openstack address scope create [-h] [-f {json,shell,table,value,yaml}]
                                      [-c COLUMN] [--max-width <integer>]
                                      [--fit-width] [--print-empty]
                                      [--noindent] [--prefix PREFIX]
                                      [--ip-version {4,6}]
                                      [--project <project>]
                                      [--project-domain <project-domain>]
                                      [--share | --no-share]
                                      <name>

Table 4.1. Table Formatter
ValueSummary

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

Table 4.2. Positional Arguments
ValueSummary

<name>

New address scope name

Table 4.3. Output Formatters
ValueSummary

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

Table 4.4. JSON Formatter
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.5. Optional Arguments
ValueSummary

--share

Share the address scope between projects

--ip-version {4,6}

Ip version (default is 4)

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--no-share

Do not share the address scope between projects (default)

-h, --help

Show this help message and exit

--project <project>

Owner’s project (name or id)

Table 4.6. Shell Formatter
ValueSummary

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

4.2. address scope delete

Delete address scope(s)

Usage:

openstack address scope delete [-h]
                                      <address-scope> [<address-scope> ...]

Table 4.7. Positional Arguments
ValueSummary

<address-scope>

Address scope(s) to delete (name or id)

Table 4.8. Optional Arguments
ValueSummary

-h, --help

Show this help message and exit

4.3. address scope list

List address scopes

Usage:

openstack address scope list [-h] [-f {csv,json,table,value,yaml}]
                                    [-c COLUMN] [--max-width <integer>]
                                    [--fit-width] [--print-empty] [--noindent]
                                    [--quote {all,minimal,none,nonnumeric}]
                                    [--sort-column SORT_COLUMN]
                                    [--name <name>]
                                    [--ip-version <ip-version>]
                                    [--project <project>]
                                    [--project-domain <project-domain>]
                                    [--share | --no-share]

Table 4.9. Table Formatter
ValueSummary

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

Table 4.10. CSV Formatter
ValueSummary

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

Table 4.11. Output Formatters
ValueSummary

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

Table 4.12. JSON Formatter
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.13. Optional Arguments
ValueSummary

--share

List address scopes shared between projects

--ip-version <ip-version>

List address scopes of given ip version networks (4 or 6)

--name <name>

List only address scopes of given name in output

--project <project>

List address scopes according to their project (name or ID)

--no-share

List address scopes not shared between projects

-h, --help

Show this help message and exit

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

4.4. address scope set

Set address scope properties

Usage:

openstack address scope set [-h] [--name <name>] [--share | --no-share]
                                   <address-scope>

Table 4.14. Positional Arguments
ValueSummary

<address-scope>

Address scope to modify (name or id)

Table 4.15. Optional Arguments
ValueSummary

--share

Share the address scope between projects

--name <name>

Set address scope name

-h, --help

Show this help message and exit

--no-share

Do not share the address scope between projects

4.5. address scope show

Display address scope details

Usage:

openstack address scope show [-h] [-f {json,shell,table,value,yaml}]
                                    [-c COLUMN] [--max-width <integer>]
                                    [--fit-width] [--print-empty] [--noindent]
                                    [--prefix PREFIX]
                                    <address-scope>

Table 4.16. Table Formatter
ValueSummary

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

Table 4.17. Positional Arguments
ValueSummary

<address-scope>

Address scope to display (name or id)

Table 4.18. Output Formatters
ValueSummary

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

Table 4.19. JSON Formatter
ValueSummary

--noindent

Whether to disable indenting the json

Table 4.20. Optional Arguments
ValueSummary

-h, --help

Show this help message and exit

Table 4.21. Shell Formatter
ValueSummary

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

Red Hat logoGithubRedditYoutubeTwitter

Learn

Try, buy, & sell

Communities

About Red Hat Documentation

We help Red Hat users innovate and achieve their goals with our products and services with content they can trust.

Making open source more inclusive

Red Hat is committed to replacing problematic language in our code, documentation, and web properties. For more details, see the Red Hat Blog.

About Red Hat

We deliver hardened solutions that make it easier for enterprises to work across platforms and environments, from the core datacenter to the network edge.

© 2024 Red Hat, Inc.