Chapter 10. bgp

<agent-id>

Id of the dynamic routing agent

<bgp-speaker>

Id or name of the bgp speaker

-h, --help

Show this help message and exit

<agent-id>

Id of the dynamic routing agent

<bgp-speaker>

Id or name of the bgp speaker

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<name>

Name of the bgp peer to create

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

--remote-as <peer-remote-as>

Peer as number. (integer in [1, 65535] is allowed)

--auth-type <peer-auth-type>

Authentication algorithm. supported algorithms: none (default), md5

--peer-ip <peer-ip-address>

Peer ip address

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--password <auth-password>

Authentication password

-h, --help

Show this help message and exit

--project <project>

Owner’s project (name or id)

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

<bgp-peer>

Bgp peer to delete (name or id)

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

<bgp-peer>

Bgp peer to update (name or id)

--password <auth-password>

Updated authentication password

-h, --help

Show this help message and exit

--name NAME

Updated name of the bgp peer

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<bgp-peer>

Bgp peer to display (name or id)

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

<bgp-speaker>

Bgp speaker (name or id)

<network>

Network to add (name or id)

-h, --help

Show this help message and exit

<bgp-peer>

Bgp peer to add (name or id)

<bgp-speaker>

Bgp speaker (name or id)

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<name>

Name of the bgp speaker to create

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

--no-advertise-floating-ip-host-routes

Disable the advertisement of floating ip host routes by the BGP speaker.

--project-domain <project-domain>

Domain the project belongs to (name or id). this can be used in case collisions between project names exist.

--no-advertise-tenant-networks

Disable the advertisement of tenant network routes by the BGP speaker.

--ip-version {4,6}

Ip version for the bgp speaker (default is 4)

--advertise-floating-ip-host-routes

Enable the advertisement of floating ip host routes by the BGP speaker. (default)

--local-as <local-as>

Local as number. (integer in [1, 65535] is allowed.)

--advertise-tenant-networks

Enable the advertisement of tenant network routes by the BGP speaker. (default)

-h, --help

Show this help message and exit

--project <project>

Owner’s project (name or id)

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names

<bgp-speaker>

Bgp speaker to delete (name or id)

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<bgp-speaker>

Bgp speaker (name or id)

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

--agent <agent-id>

List bgp speakers hosted by an agent (id only)

<bgp-speaker>

Bgp speaker (name or id)

<network>

Network to remove (name or id)

-h, --help

Show this help message and exit

<bgp-peer>

Bgp peer to remove (name or id)

<bgp-speaker>

Bgp speaker (name or id)

-h, --help

Show this help message and exit

<bgp-speaker>

Bgp speaker to update (name or id)

--no-advertise-floating-ip-host-routes

Disable the advertisement of floating ip host routes by the BGP speaker.

--no-advertise-tenant-networks

Disable the advertisement of tenant network routes by the BGP speaker.

--advertise-floating-ip-host-routes

Enable the advertisement of floating ip host routes by the BGP speaker. (default)

--name NAME

Name of the bgp speaker to update

--advertise-tenant-networks

Enable the advertisement of tenant network routes by the BGP speaker. (default)

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<bgp-speaker>

Id or name of the bgp speaker

--quote {all,minimal,none,nonnumeric}

When to include quotes, defaults to nonnumeric

output formatter options-f {csv,json,table,value,yaml}, --format {csv,json,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--sort-column SORT_COLUMN

Specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

--print-empty

Print empty table if there is no data to show.

--max-width <integer>

Maximum display width, <1 to disable. you can also use the CLIFF_MAX_TERM_WIDTH environment variable, but the parameter takes precedence.

--fit-width

Fit the table to the display width. implied if --max- width greater than 0. Set the environment variable CLIFF_FIT_WIDTH=1 to always enable

<bgp-speaker>

Bgp speaker to display (name or id)

output formatter options-f {json,shell,table,value,yaml}, --format {json,shell,table,value,yaml}

The output format, defaults to table

-c COLUMN, --column COLUMN

Specify the column(s) to include, can be repeated

--noindent

Whether to disable indenting the json

-h, --help

Show this help message and exit

a format a UNIX shell can parse (variable="value")--prefix PREFIX

Add a prefix to all variable names