10.5. Host Tasks

Procedure

1. From the Administration Portal, click Compute Hosts.
2. Click New.
3. Use the drop-down list to select the Data Center and Host Cluster for the new host.
4. Enter the Name and the Address of the new host. The standard SSH port, port 22, is auto-filled in the SSH Port field.

5. Select an authentication method to use for the Manager to access the host.

   • Enter the root user’s password to use password authentication.
   • Alternatively, copy the key displayed in the SSH PublicKey field to /root/.ssh/authorized_keys on the host to use public key authentication.

6. Optionally, click the Advanced Parameters button to change the following advanced host settings:

   • Disable automatic firewall configuration.
   • Add a host SSH fingerprint to increase security. You can add it manually, or fetch it automatically.
7. Optionally configure power management, where the host has a supported power management card. For information on power management configuration, see Host Power Management Settings Explained in the Administration Guide.
8. Click OK.

1. Click Compute Hosts.
2. Click New.
3. Use the drop-down menu to select the Host Cluster for the new host.
4. Select the Foreman/Satellite check box to display the options for adding a Satellite host provider host and select the provider from which the host is to be added.

5. Select either Discovered Hosts or Provisioned Hosts.

   • Discovered Hosts (default option): Select the host, host group, and compute resources from the drop-down lists.

   • Provisioned Hosts: Select a host from the Providers Hosts drop-down list.

     Any details regarding the host that can be retrieved from the external provider are automatically set, and can be edited as desired.

6. Enter the Name and SSH Port (Provisioned Hosts only) of the new host.

7. Select an authentication method to use with the host.

   • Enter the root user’s password to use password authentication.
   • Copy the key displayed in the SSH PublicKey field to /root/.ssh/authorized_hosts on the host to use public key authentication (Provisioned Hosts only).

8. You have now completed the mandatory steps to add a Red Hat Enterprise Linux host. Click the Advanced Parameters drop-down button to show the advanced host settings.

   1. Optionally disable automatic firewall configuration.
   2. Optionally add a host SSH fingerprint to increase security. You can add it manually, or fetch it automatically.
9. You can configure the Power Management, SPM, Console, and Network Provider using the applicable tabs now; however, as these are not fundamental to adding a Red Hat Enterprise Linux host, they are not covered in this procedure.
10. Click OK to add the host and close the window.

1. Add the Satellite server as an external provider. See Section 14.2.1, “Adding a Red Hat Satellite Instance for Host Provisioning” for more information.

2. Associate the required host with the Satellite server.

   Note

   The host must be registered to the Satellite server and have the katello-agent package installed.

   For information on how to configure a host registration and how to register a host and install the katello-agent package see Registering Hosts in the Red Hat Satellite document Managing Hosts.

   1. Click Compute Hosts and select the host.
   2. Click Edit.
   3. Select the Use Foreman/Satellite check box.
   4. Select the required Satellite server from the drop-down list.
   5. Click OK.

1. Click Compute Hosts and select a host.
2. Click Management Maintenance, and click OK to confirm.
3. When the host is in maintenance mode, click Edit.
4. Click the Power Management tab.
5. Select the Enable Power Management check box to enable the fields.

6. Select the Kdump integration check box to prevent the host from fencing while performing a kernel crash dump.

   Important

   If you enable or disable Kdump integration on an existing host, you must reinstall the host for kdump to be configured.

7. Optionally, select the Disable policy control of power management check box if you do not want your host’s power management to be controlled by the Scheduling Policy of the host’s cluster.
8. Click the plus (+) button to add a new power management device. The Edit fence agent window opens.
9. Enter the User Name and Password of the power management device into the appropriate fields.
10. Select the power management device Type in the drop-down list.
11. Enter the IP address in the Address field.
12. Enter the SSH Port number used by the power management device to communicate with the host.
13. Enter the Slot number used to identify the blade of the power management device.

14. Enter the Options for the power management device. Use a comma-separated list of 'key=value' entries.

    • If both IPv4 and IPv6 IP addresses can be used (default), leave the Options field blank.
    • If only IPv4 IP addresses can be used, enter inet4_only=1.
    • If only IPv6 IP addresses can be used, enter inet6_only=1.
15. Select the Secure check box to enable the power management device to connect securely to the host.
16. Click Test to ensure the settings are correct. Test Succeeded, Host Status is: on will display upon successful verification.
17. Click OK to close the Edit fence agent window.
18. In the Power Management tab, optionally expand the Advanced Parameters and use the up and down buttons to specify the order in which the Manager will search the host’s cluster and dc (datacenter) for a fencing proxy.
19. Click OK.

1. Click Compute Hosts.
2. Click Edit.
3. Click the SPM tab.
4. Use the radio buttons to select the appropriate SPM priority for the host.
5. Click OK.

Configuring a Host for PCI Passthrough

1. Enable the virtualization extension and IOMMU extension in the BIOS. See Enabling Intel VT-x and AMD-V virtualization hardware extensions in BIOS in the Red Hat Enterprise Linux Virtualization Deployment and Administration Guide for more information.

2. Enable the IOMMU flag in the kernel by selecting the Hostdev Passthrough & SR-IOV check box when adding the host to the Manager or by editing the grub configuration file manually.

   • To enable the IOMMU flag from the Administration Portal, see Adding Standard Hosts to the Red Hat Virtualization Manager and Kernel Settings Explained.
   • To edit the grub configuration file manually, see Enabling IOMMU Manually.
3. For GPU passthrough, you need to run additional configuration steps on both the host and the guest system. See GPU device passthrough: Assigning a host GPU to a single virtual machine in Setting up an NVIDIA GPU for a virtual machine in Red Hat Virtualization for more information.

Enabling IOMMU Manually

1. Enable IOMMU by editing the grub configuration file.

   Note

   If you are using IBM POWER8 hardware, skip this step as IOMMU is enabled by default.

   • For Intel, boot the machine, and append intel_iommu=on to the end of the GRUB_CMDLINE_LINUX line in the grub configuration file.

     # vi /etc/default/grub
     ...
     GRUB_CMDLINE_LINUX="nofb splash=quiet console=tty0 ... intel_iommu=on
     ...

   • For AMD, boot the machine, and append amd_iommu=on to the end of the GRUB_CMDLINE_LINUX line in the grub configuration file.

     # vi /etc/default/grub
     ...
     GRUB_CMDLINE_LINUX="nofb splash=quiet console=tty0 ... amd_iommu=on
     ...

     Note

     If intel_iommu=on or amd_iommu=on works, you can try adding iommu=pt or amd_iommu=pt. The pt option only enables IOMMU for devices used in passthrough and provides better host performance. However, the option might not be supported on all hardware. Revert to previous option if the pt option doesn’t work for your host.

     If the passthrough fails because the hardware does not support interrupt remapping, you can consider enabling the allow_unsafe_interrupts option if the virtual machines are trusted. The allow_unsafe_interrupts is not enabled by default because enabling it potentially exposes the host to MSI attacks from virtual machines. To enable the option:

     # vi /etc/modprobe.d
     options vfio_iommu_type1 allow_unsafe_interrupts=1

2. Refresh the grub.cfg file and reboot the host for these changes to take effect:

   # grub2-mkconfig -o /boot/grub2/grub.cfg

   # reboot

1. Click Compute Hosts and select the desired host.
2. Click Management Maintenance to open the Maintenance Host(s) confirmation window.

3. Optionally, enter a Reason for moving the host into maintenance mode, which will appear in the logs and when the host is activated again.

   Note

   The host maintenance Reason field will only appear if it has been enabled in the cluster settings. See Section 8.2.2, “General Cluster Settings Explained” for more information.

4. Optionally, select the required options for hosts that support Gluster.

   Select the Ignore Gluster Quorum and Self-Heal Validations option to avoid the default checks. By default, the Manager checks that the Gluster quorum is not lost when the host is moved to maintenance mode. The Manager also checks that there is no self-heal activity that will be affected by moving the host to maintenance mode. If the Gluster quorum will be lost or if there is self-heal activity that will be affected, the Manager prevents the host from being placed into maintenance mode. Only use this option if there is no other way to place the host in maintenance mode.

   Select the Stop Gluster Service option to stop all Gluster services while moving the host to maintenance mode.

   Note

   These fields will only appear in the host maintenance window when the selected host supports Gluster. See Replacing the Primary Gluster Storage Node in Maintaining Red Hat Hyperconverged Infrastructure for more information.

5. Click OK to initiate maintenance mode.

1. Click Compute Hosts and select the host.
2. Click Management Activate.

Configuring Firewall Rules for Hosts

1. On the Manager machine, edit ovirt-host-deploy-post-tasks.yml.example to add a custom firewall port:

   # vi /etc/ovirt-engine/ansible/ovirt-host-deploy-post-tasks.yml.example
   ---
   #
   # Any additional tasks required to be executing during host deploy process can
   # be added below
   #
   - name: Enable additional port on firewalld
     firewalld:
       port: "12345/tcp"
       permanent: yes
       immediate: yes
       state: enabled

2. Save the file to another location as ovirt-host-deploy-post-tasks.yml.

1. Click Compute Hosts and select the host.
2. Click Management Maintenance.
3. when the host is in maintenance mode, click Remove to open the Remove Host(s) confirmation window.
4. Select the Force Remove check box if the host is part of a Red Hat Gluster Storage cluster and has volume bricks on it, or if the host is non-responsive.
5. Click OK.

Procedure

1. Click Compute Hosts and select the host.
2. Click Management Maintenance.
3. Click Installation Reinstall to open the Install Host window.
4. Click OK to reinstall the host.

1. Click Compute Hosts.
2. Click the host’s name to open the details view.
3. Click the Errata tab.

1. Click Compute Hosts.
2. Click the host’s name to open the details view.
3. Click Host Devices tab.

1. In the Administration Portal, click Compute Hosts and select a host.
2. Click Host Console.

1. On the Manager machine, create a file in the directory /usr/share/ovirt-engine/playbooks. For example:

   # vim /usr/share/ovirt-engine/playbooks/change-spice-cipher.yml

2. Enter the following in the file and save it:

   name: oVirt - setup weaker SPICE encryption for old clients
   hosts: hostname
   vars:
     host_deploy_spice_cipher_string: 'DEFAULT:-RC4:-3DES:-DES'
   roles:
     - ovirt-host-deploy-spice-encryption

3. Run the file you just created:

   # ansible-playbook -l hostname /usr/share/ovirt-engine/playbooks/change-spice-cipher.yml