Red Hat Summit Red Hat SummitSupportConsoleDéveloppeursCommencer un essaiContact

Ce contenu n'est pas disponible dans la langue sélectionnée.

17.4. Monitoring Notifications

17.4.1. Configuring Nagios Server to Send Mail Notifications
Copier lien

  1. In the /etc/nagios/gluster/gluster-contacts.cfg file, add contacts to send mail in the format shown below:
    Modify contact_name, alias, and email. 
    define contact {
        contact_name                            Contact1
        alias                                   ContactNameAlias
        email                                   email-address
        service_notification_period             24x7
        service_notification_options            w,u,c,r,f,s
        service_notification_commands           notify-service-by-email
        host_notification_period                24x7
        host_notification_options               d,u,r,f,s
        host_notification_commands              notify-host-by-email
}
define contact {
        contact_name                            Contact2
        alias                                   ContactNameAlias2
        email                                   email-address
        service_notification_period             24x7
        service_notification_options            w,u,c,r,f,s
        service_notification_commands           notify-service-by-email
        host_notification_period                24x7
        host_notification_options               d,u,r,f,s
        host_notification_commands              notify-host-by-email
}
    Copy to Clipboard Toggle word wrap
    The service_notification_options directive is used to define the service states for which notifications can be sent out to this contact. Valid options are a combination of one or more of the following:
    • w: Notify on WARNING service states
    • u: Notify on UNKNOWN service states
    • c: Notify on CRITICAL service states
    • r: Notify on service RECOVERY (OK states)
    • f: Notify when the service starts and stops FLAPPING
    • n (none): Do not notify the contact on any type of service notifications
    The host_notification_options directive is used to define the host states for which notifications can be sent out to this contact. Valid options are a combination of one or more of the following:
    • d: Notify on DOWN host states
    • u: Notify on UNREACHABLE host states
    • r: Notify on host RECOVERY (UP states)
    • f: Notify when the host starts and stops FLAPPING
    • s: Send notifications when host or service scheduled downtime starts and ends
    • n (none): Do not notify the contact on any type of host notifications.

    Note

    By default, a contact and a contact group are defined for administrators in contacts.cfg and all the services and hosts will notify the administrators. Add suitable email id for administrator in contacts.cfg file.
  2. To add a group to which the mail need to be sent, add the details as given below: 
      define contactgroup{
        contactgroup_name                   Group1
        alias                               GroupAlias
        members                             Contact1,Contact2
}
    Copy to Clipboard Toggle word wrap
  3. In the /etc/nagios/gluster/gluster-templates.cfg file specify the contact name and contact group name for the services for which the notification need to be sent, as shown below:
    Add contact_groups name and contacts name. 
    define host{
   name                         gluster-generic-host
   use                          linux-server
   notifications_enabled        1
   notification_period          24x7
   notification_interval        120
   notification_options         d,u,r,f,s
   register                     0
   contact_groups         Group1
   contacts                     Contact1,Contact2
   }

 define service {
   name                         gluster-service
   use                          generic-service
   notifications_enabled       1
   notification_period          24x7
   notification_options         w,u,c,r,f,s
   notification_interval        120
   register                     0
   _gluster_entity              Service
   contact_groups        Group1
   contacts                 Contact1,Contact2

}
    Copy to Clipboard Toggle word wrap
    You can configure notification for individual services by editing the corresponding node configuration file. For example, to configure notification for brick service, edit the corresponding node configuration file as shown below: 
    define service {
  use                            brick-service
  _VOL_NAME                      VolumeName
  __GENERATED_BY_AUTOCONFIG      1
  notes                          Volume : VolumeName
  host_name                      RedHatStorageNodeName
  _BRICK_DIR                     brickpath
  service_description            Brick Utilization - brickpath
  contact_groups          Group1
    contacts                Contact1,Contact2
}
    Copy to Clipboard Toggle word wrap
  4. To receive detailed information on every update when Cluster Auto-Config is run, edit /etc/nagios/objects/commands.cfg file add $NOTIFICATIONCOMMENT$\n after $SERVICEOUTPUT$\n option in notify-service-by-email and notify-host-by-emailcommand definition as shown below: 
    # 'notify-service-by-email' command definition
define command{
        command_name    notify-service-by-email
        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$\n $NOTIFICATIONCOMMENT$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
        }
    Copy to Clipboard Toggle word wrap
  5. Restart the Nagios server using the following command: 
    # service nagios restart
    Copy to Clipboard Toggle word wrap
The Nagios server sends notifications during status changes to the mail addresses specified in the file.

Note

  • By default, the system ensures three occurences of the event before sending mail notifications.
  • By default, Nagios Mail notification is sent using /bin/mail command. To change this, modify the definition for notify-host-by-email command and notify-service-by-email command in /etc/nagios/objects/commands.cfg file and configure the mail server accordingly.
  • Ensure that the mail server is setup and configured.
  1. Log in as root user.
  2. In the /etc/nagios/gluster/snmpmanagers.conf file, specify the Host Name or IP address and community name of the SNMP managers to whom the SNMP traps need to be sent as shown below: 
    HostName-or-IP-address public
    Copy to Clipboard Toggle word wrap
    In the /etc/nagios/gluster/gluster-contacts.cfg file specify the contacts name as +snmp as shown below: 
    define contact {
       contact_name                  snmp
       alias                         Snmp Traps
       email                         admin@ovirt.com
       service_notification_period   24x7
       service_notification_options  w,u,c,r,f,s
       service_notification_commands gluster-notify-service-by-snmp
       host_notification_period      24x7
       host_notification_options     d,u,r,f,s
       host_notification_commands    gluster-notify-host-by-snmp
}
    Copy to Clipboard Toggle word wrap
    You can download the required Management Information Base (MIB) files from the URLs given below:
  3. Restart Nagios using the following command: 
    # service nagios restart
    Copy to Clipboard Toggle word wrap
Retour au début
Red Hat logoGithubredditYoutubeTwitter

Apprendre

Essayez, achetez et vendez

Communautés

À propos de la documentation Red Hat

Nous aidons les utilisateurs de Red Hat à innover et à atteindre leurs objectifs grâce à nos produits et services avec un contenu auquel ils peuvent faire confiance. Découvrez nos récentes mises à jour.

Rendre l’open source plus inclusif

Red Hat s'engage à remplacer le langage problématique dans notre code, notre documentation et nos propriétés Web. Pour plus de détails, consultez le Blog Red Hat.

À propos de Red Hat

Nous proposons des solutions renforcées qui facilitent le travail des entreprises sur plusieurs plates-formes et environnements, du centre de données central à la périphérie du réseau.

Theme

© 2025 Red Hat