Red Hat Summit Red Hat SummitSupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

22.13. Checking the Status of NTP

To check if ntpd is configured to run at system start, issue the following command: 
~]$ chkconfig --list ntpd
ntpd           	0:off	1:off	2:on	3:on	4:on	5:on	6:off
Copy to Clipboard Toggle word wrap
By default, when ntpd is installed, it is configured to start at every system start.
To check if ntpd is running, issue the following command: 
~]$ ntpq -p
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
+clock.util.phx2 .CDMA.           1 u  111  128  377  175.495    3.076   2.250
*clock02.util.ph .CDMA.           1 u   69  128  377  175.357    7.641   3.671
 ms21.snowflakeh .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 rs11.lvs.iif.hu .STEP.          16 u    - 1024    0    0.000    0.000   0.000
 2001:470:28:bde .STEP.          16 u    - 1024    0    0.000    0.000   0.000
Copy to Clipboard Toggle word wrap
The command lists connected time servers and displays information indicating when they were last polled and the stability of the replies. The column headings are as follows:
  • remote and refid: remote NTP server, and its NTP server
  • st: stratum of server
  • t: type of server (local, unicast, multicast, or broadcast)
  • poll: how frequently to query server (in seconds)
  • when: how long since last poll (in seconds)
  • reach: octal bitmask of success or failure of last 8 queries (left-shifted); 377 = 11111111 = all recent queries were successful; 257 = 10101111 = 4 most recent were successful, 5 and 7 failed
  • delay: network round trip time (in milliseconds)
  • offset: difference between local clock and remote clock (in milliseconds)
  • jitter: difference of successive time values from server (high jitter could be due to an unstable clock or, more likely, poor network performance)
To obtain a brief status report from ntpd, issue the following command: 
~]$ ntpstat
unsynchronised
  time server re-starting
   polling server every 64 s
Copy to Clipboard Toggle word wrap 
~]$ ntpstat
synchronised to NTP server (10.5.26.10) at stratum 2
   time correct to within 52 ms
   polling server every 1024 s
Copy to Clipboard Toggle word wrap
Torna in cima
Red Hat logoGithubredditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi. Esplora i nostri ultimi aggiornamenti.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita il Blog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

Theme

© 2025 Red Hat