SupportoConsoleSviluppatoriInizia una provaContatti

Questo contenuto non è disponibile nella lingua selezionata.

Chapter 5. Configuring secrets for Alertmanager

The OpenShift Dedicated monitoring stack includes Alertmanager, which routes alerts from Prometheus to endpoint receivers. If you need to authenticate with a receiver so that Alertmanager can send alerts to it, you can configure Alertmanager to use a secret that contains authentication credentials for the receiver.

For example, you can configure Alertmanager to use a secret to authenticate with an endpoint receiver that requires a certificate issued by a private Certificate Authority (CA). You can also configure Alertmanager to use a secret to authenticate with a receiver that requires a password file for Basic HTTP authentication. In either case, authentication details are contained in the Secret object rather than in the ConfigMap object.

5.1. Adding a secret to the Alertmanager configuration

You can add secrets to the Alertmanager configuration for user-defined projects by editing the user-workload-monitoring-config config map in the openshift-user-workload-monitoring project.

After you add a secret to the config map, the secret is mounted as a volume at /etc/alertmanager/secrets/<secret_name> within the alertmanager container for the Alertmanager pods.

Prerequisites

  • You have access to the cluster as a user with the dedicated-admin role.
  • The user-workload-monitoring-config ConfigMap object exists. This object is created by default when the cluster is created.
  • You have created the secret to be configured in Alertmanager in the openshift-user-workload-monitoring project.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. Edit the ConfigMap object.

    1. Edit the user-workload-monitoring-config config map in the openshift-user-workload-monitoring project: 

      $ oc -n openshift-user-workload-monitoring edit configmap user-workload-monitoring-config

    2. Add a secrets: section under data/config.yaml/alertmanager/secrets with the following configuration: 

      apiVersion: v1
kind: ConfigMap
metadata:
  name: user-workload-monitoring-config
  namespace: openshift-user-workload-monitoring
data:
  config.yaml: |
    alertmanager:
      secrets: 1
      - <secret_name_1> 2
      - <secret_name_2>
      1
      This section contains the secrets to be mounted into Alertmanager. The secrets must be located within the same namespace as the Alertmanager object.
      2
      The name of the Secret object that contains authentication credentials for the receiver. If you add multiple secrets, place each one on a new line.

      The following sample config map settings configure Alertmanager to use two Secret objects named test-secret and test-secret-api-token: 

      apiVersion: v1
kind: ConfigMap
metadata:
  name: user-workload-monitoring-config
  namespace: openshift-user-workload-monitoring
data:
  config.yaml: |
    alertmanager:
      enabled: true
      secrets:
      - test-secret
      - test-api-receiver-token
  2. Save the file to apply the changes. The new configuration is applied automatically.

5.2. Attaching additional labels to your time series and alerts

You can attach custom labels to all time series and alerts leaving Prometheus by using the external labels feature of Prometheus.

Prerequisites

  • You have access to the cluster as a user with the dedicated-admin role.
  • The user-workload-monitoring-config ConfigMap object exists. This object is created by default when the cluster is created.
  • You have installed the OpenShift CLI (oc).

Procedure

  1. Edit the ConfigMap object:

    1. Edit the user-workload-monitoring-config ConfigMap object in the openshift-user-workload-monitoring project: 

      $ oc -n openshift-user-workload-monitoring edit configmap user-workload-monitoring-config

    2. Define a map of labels you want to add for every metric under data/config.yaml: 

      apiVersion: v1
kind: ConfigMap
metadata:
  name: user-workload-monitoring-config
  namespace: openshift-user-workload-monitoring
data:
  config.yaml: |
    prometheus:
      externalLabels:
        <key>: <value> 1
      1
      Substitute <key>: <value> with a map of key-value pairs where <key> is a unique name for the new label and <value> is its value.
      Warning
      • Do not use prometheus or prometheus_replica as key names, because they are reserved and will be overwritten.
      • Do not use cluster or managed_cluster as key names. Using them can cause issues where you are unable to see data in the developer dashboards.
      Note

      In the openshift-user-workload-monitoring project, Prometheus handles metrics and Thanos Ruler handles alerting and recording rules. Setting externalLabels for prometheus in the user-workload-monitoring-config ConfigMap object will only configure external labels for metrics and not for any rules.

      For example, to add metadata about the region and environment to all time series and alerts related to user-defined projects, use the following example: 

      apiVersion: v1
kind: ConfigMap
metadata:
  name: user-workload-monitoring-config
  namespace: openshift-user-workload-monitoring
data:
  config.yaml: |
    prometheus:
      externalLabels:
        region: eu
        environment: prod
    3. Save the file to apply the changes. The pods affected by the new configuration are automatically redeployed.
Red Hat logoGithubRedditYoutubeTwitter

Formazione

Prova, acquista e vendi

Community

Informazioni sulla documentazione di Red Hat

Aiutiamo gli utenti Red Hat a innovarsi e raggiungere i propri obiettivi con i nostri prodotti e servizi grazie a contenuti di cui possono fidarsi.

Rendiamo l’open source più inclusivo

Red Hat si impegna a sostituire il linguaggio problematico nel codice, nella documentazione e nelle proprietà web. Per maggiori dettagli, visita ilBlog di Red Hat.

Informazioni su Red Hat

Forniamo soluzioni consolidate che rendono più semplice per le aziende lavorare su piattaforme e ambienti diversi, dal datacenter centrale all'edge della rete.

© 2024 Red Hat, Inc.